Saved in:
| Main Authors: | , |
|---|---|
| Format: | Preprint |
| Published: |
2026
|
| Subjects: | |
| Online Access: | https://arxiv.org/abs/2603.14902 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1866911518814109696 |
|---|---|
| author | Tagnani, D. Andreotti, M. |
| author_facet | Tagnani, D. Andreotti, M. |
| contents | We present T-DAQ-P, a compact and portable data acquisition and telemetry platform designed to support detector deployments in laboratory and field conditions by integrating event streaming, slow-control telemetry, and operator-oriented commissioning tools in a single unit. The system combines a Raspberry Pi 5 host for multi-stream ingestion, visualization, and storage with an Arduino UNO R4 WiFi microcontroller dedicated to sensor acquisition. The electronics integrate commercial off-the-shelf (COTS) modules through an engineered interface layer including protected power distribution, logic-level adaptation, and a DB-37 expansion connector exposing I2C-SPI-ADC lines for external instrumentation. On the telemetry side, the microcontroller firmware performs automatic I2C discovery, conditional sensor handling, and outputs framed NMEA-like messages with XOR checksum and explicit block delimiters, enabling robust parsing and synchronization on the host. A finite-state control (STOP-RUN-SIM-INIT) and watchdog-style recovery actions implement resilience under partial hardware availability and field failures. The host software adopts a multi-process architecture with independent readers for event, telemetry, and actuator streams, message queues for isolation, and coherent time-stamped logging across streams. A simulation mode and integrated command channel allow end-to-end pipeline verification and rapid commissioning without full sensor availability. The paper details architecture, electronics integration, firmware protocol, host software design, and functional/engineering validation procedures, providing a reproducible blueprint for portable instrumentation readout and contextual telemetry acquisition. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2603_14902 |
| institution | arXiv |
| publishDate | 2026 |
| record_format | arxiv |
| spellingShingle | T-DAQ-P: a portable tablet-form multi-stream data acquisition and contextual telemetry platform based on COTS modules and a custom integration layer Tagnani, D. Andreotti, M. Instrumentation and Detectors We present T-DAQ-P, a compact and portable data acquisition and telemetry platform designed to support detector deployments in laboratory and field conditions by integrating event streaming, slow-control telemetry, and operator-oriented commissioning tools in a single unit. The system combines a Raspberry Pi 5 host for multi-stream ingestion, visualization, and storage with an Arduino UNO R4 WiFi microcontroller dedicated to sensor acquisition. The electronics integrate commercial off-the-shelf (COTS) modules through an engineered interface layer including protected power distribution, logic-level adaptation, and a DB-37 expansion connector exposing I2C-SPI-ADC lines for external instrumentation. On the telemetry side, the microcontroller firmware performs automatic I2C discovery, conditional sensor handling, and outputs framed NMEA-like messages with XOR checksum and explicit block delimiters, enabling robust parsing and synchronization on the host. A finite-state control (STOP-RUN-SIM-INIT) and watchdog-style recovery actions implement resilience under partial hardware availability and field failures. The host software adopts a multi-process architecture with independent readers for event, telemetry, and actuator streams, message queues for isolation, and coherent time-stamped logging across streams. A simulation mode and integrated command channel allow end-to-end pipeline verification and rapid commissioning without full sensor availability. The paper details architecture, electronics integration, firmware protocol, host software design, and functional/engineering validation procedures, providing a reproducible blueprint for portable instrumentation readout and contextual telemetry acquisition. |
| title | T-DAQ-P: a portable tablet-form multi-stream data acquisition and contextual telemetry platform based on COTS modules and a custom integration layer |
| topic | Instrumentation and Detectors |
| url | https://arxiv.org/abs/2603.14902 |