Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Preprint |
| Published: |
2026
|
| Subjects: | |
| Online Access: | https://arxiv.org/abs/2603.17526 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1866912972586090496 |
|---|---|
| author | Vassos, Evangelos Whittaker, Thomas Jabbar, Abdul Bansal, Aakash Whittow, Will |
| author_facet | Vassos, Evangelos Whittaker, Thomas Jabbar, Abdul Bansal, Aakash Whittow, Will |
| contents | This article presents a fully 3D-printed wideband metasurface folded reflectarray antenna (MFRA) operating in the millimeter-wave n257 band. The proposed MFRA integrates a novel polarization-rotating reflective metasurface (RMS), a compact embedded horn feed, and a polarization-selective metasurface polarization grid (MPG), all fabricated using a low-cost in-house 3D-printed method. Unlike conventional PCB-based FRAs constrained to planar unit-cell geometries, the proposed anisotropic meta-element design exploits full three-dimensional dielectric control by tailoring varying unit-cell heights. This volumetric tuning, combined with the spatial distribution of the meta-elements, enables phase compensation exceeding $400^{\circ}$ across the aperture, supporting robust wideband performance. An MFRA prototype is in-house fabricated and experimentally validated. Measured results agree well with simulations, achieving a $-10$ dB impedance bandwidth of 20.7\% (26--32 GHz) and a peak realized gain of 31.1 dBi at 28.2 GHz. The antenna exhibits sidelobe levels below $-20$ dB, cross-polarization below $-30$ dB, and a compact height-to-diameter ratio of 0.20. Stable pencil beams with an average HPBW of $3.7^{\circ}$ are maintained across the operating band. To further validate the robustness of the proposed in-house designed MFRA, a commercially manufactured RMS was also obtained, whose measured performance shows excellent agreement with the in-house 3D-printed version, confirming a cost-effective rapid-prototyping antenna solution. The proposed MFRA is a cost-effective solution for beyond 5G and 6G high-gain point-to-point mmWave wireless applications, such as fixed wireless access, near field communication, and beam focusing. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2603_17526 |
| institution | arXiv |
| publishDate | 2026 |
| record_format | arxiv |
| spellingShingle | Fully 3D-Printed Wideband Metasurface Folded Reflectarray Antenna Vassos, Evangelos Whittaker, Thomas Jabbar, Abdul Bansal, Aakash Whittow, Will Signal Processing This article presents a fully 3D-printed wideband metasurface folded reflectarray antenna (MFRA) operating in the millimeter-wave n257 band. The proposed MFRA integrates a novel polarization-rotating reflective metasurface (RMS), a compact embedded horn feed, and a polarization-selective metasurface polarization grid (MPG), all fabricated using a low-cost in-house 3D-printed method. Unlike conventional PCB-based FRAs constrained to planar unit-cell geometries, the proposed anisotropic meta-element design exploits full three-dimensional dielectric control by tailoring varying unit-cell heights. This volumetric tuning, combined with the spatial distribution of the meta-elements, enables phase compensation exceeding $400^{\circ}$ across the aperture, supporting robust wideband performance. An MFRA prototype is in-house fabricated and experimentally validated. Measured results agree well with simulations, achieving a $-10$ dB impedance bandwidth of 20.7\% (26--32 GHz) and a peak realized gain of 31.1 dBi at 28.2 GHz. The antenna exhibits sidelobe levels below $-20$ dB, cross-polarization below $-30$ dB, and a compact height-to-diameter ratio of 0.20. Stable pencil beams with an average HPBW of $3.7^{\circ}$ are maintained across the operating band. To further validate the robustness of the proposed in-house designed MFRA, a commercially manufactured RMS was also obtained, whose measured performance shows excellent agreement with the in-house 3D-printed version, confirming a cost-effective rapid-prototyping antenna solution. The proposed MFRA is a cost-effective solution for beyond 5G and 6G high-gain point-to-point mmWave wireless applications, such as fixed wireless access, near field communication, and beam focusing. |
| title | Fully 3D-Printed Wideband Metasurface Folded Reflectarray Antenna |
| topic | Signal Processing |
| url | https://arxiv.org/abs/2603.17526 |