VolTune: A Fine-Grained Runtime Voltage Control Architecture for FPGA Systems

Fuente: arXiv
Enregistré dans:
Détails bibliographiques
Auteurs principaux: Ahmed, Akram Ben, Hirofuchi, Takahiro, Fukai, Takaaki
Format: Preprint
Publié: 2026
Sujets:
Accès en ligne:
Tags: Ajouter un tag
Pas de tags, Soyez le premier à ajouter un tag!
_version_ 1866917364305494016
author Ahmed, Akram Ben
Hirofuchi, Takahiro
Fukai, Takaaki
author_facet Ahmed, Akram Ben
Hirofuchi, Takahiro
Fukai, Takaaki
contents The rapid emergence of edge computing platforms and large-scale data centers has made power efficiency a primary design constraint, particularly for data-intensive and AI-driven workloads. Field-programmable gate arrays (FPGAs) are increasingly adopted due to their flexibility and potential for energy-efficient acceleration. However, FPGA supply voltages are typically fixed at design time using conservative margins, limiting the ability to adapt power consumption to runtime conditions. This paper presents VolTune, an open-source runtime voltage control architecture that enables runtime tuning of FPGA supply voltages through FPGA-integrated control logic that abstracts low-level PMBus operations. VolTune provides both hardware-based and software-based control paths, allowing designers to balance deterministic low-latency operation against programmability. In the presented prototype, the hardware-based control path achieves a measured end-to-end voltage transition latency of 2.3 ms, while the controller adds under 2% static power overhead and under 2% FPGA resource overhead. As a representative case study, VolTune is evaluated on the GTX transceiver supply rail of a Kintex-7 platform. The results show that runtime voltage tuning exposes a bounded operating region with clear trade-offs between energy efficiency and reliability, and achieves up to approximately 29.3% rail-power reduction at 10.0 Gbps when allowing BER up to 10e-6. These results show that FPGA-integrated runtime voltage control can provide practical energy savings with low integration overhead.
format Preprint
id arxiv_https___arxiv_org_abs_2603_26147
institution arXiv
publishDate 2026
record_format arxiv
spellingShingle VolTune: A Fine-Grained Runtime Voltage Control Architecture for FPGA Systems
Ahmed, Akram Ben
Hirofuchi, Takahiro
Fukai, Takaaki
Hardware Architecture
The rapid emergence of edge computing platforms and large-scale data centers has made power efficiency a primary design constraint, particularly for data-intensive and AI-driven workloads. Field-programmable gate arrays (FPGAs) are increasingly adopted due to their flexibility and potential for energy-efficient acceleration. However, FPGA supply voltages are typically fixed at design time using conservative margins, limiting the ability to adapt power consumption to runtime conditions. This paper presents VolTune, an open-source runtime voltage control architecture that enables runtime tuning of FPGA supply voltages through FPGA-integrated control logic that abstracts low-level PMBus operations. VolTune provides both hardware-based and software-based control paths, allowing designers to balance deterministic low-latency operation against programmability. In the presented prototype, the hardware-based control path achieves a measured end-to-end voltage transition latency of 2.3 ms, while the controller adds under 2% static power overhead and under 2% FPGA resource overhead. As a representative case study, VolTune is evaluated on the GTX transceiver supply rail of a Kintex-7 platform. The results show that runtime voltage tuning exposes a bounded operating region with clear trade-offs between energy efficiency and reliability, and achieves up to approximately 29.3% rail-power reduction at 10.0 Gbps when allowing BER up to 10e-6. These results show that FPGA-integrated runtime voltage control can provide practical energy savings with low integration overhead.
title VolTune: A Fine-Grained Runtime Voltage Control Architecture for FPGA Systems
topic Hardware Architecture
url https://arxiv.org/abs/2603.26147