Saved in:
| Main Authors: | , , , , , |
|---|---|
| Format: | Preprint |
| Published: |
2026
|
| Subjects: | |
| Online Access: | https://arxiv.org/abs/2604.01490 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1866918425265176576 |
|---|---|
| author | Saito, Ryouichi Koide, Takahiro Tanaka, Yuya Nakashima, Yasutaka Yamamoto, Motoji Kanada, Ayato |
| author_facet | Saito, Ryouichi Koide, Takahiro Tanaka, Yuya Nakashima, Yasutaka Yamamoto, Motoji Kanada, Ayato |
| contents | Continuum robots are well suited for constrained environments but suffer from low distal stiffness, resulting in large posture errors under external loads. In this paper, we propose a novel structural primitive, the Distal-Stable Beam, which achieves a strong stiffness gradient through purely geometric design, maintaining compliance in the intermediate section while ensuring high distal rigidity. The structure consists of two parallel rods and one convergent rod constrained by guide disks, introducing geometric coupling that suppresses deformation modes and preserves distal posture. Experiments show that the distal stiffness is 12 times higher than at the center, corresponding to an approximately 100-fold improvement over a conventional cantilever beam. The proposed mechanism enables simultaneous compliance and distal stability without active stiffness modulation, providing a new design approach for continuum robots requiring both safety and precision. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2604_01490 |
| institution | arXiv |
| publishDate | 2026 |
| record_format | arxiv |
| spellingShingle | Distal-Stable Beam for Continuum Robots Saito, Ryouichi Koide, Takahiro Tanaka, Yuya Nakashima, Yasutaka Yamamoto, Motoji Kanada, Ayato Robotics Continuum robots are well suited for constrained environments but suffer from low distal stiffness, resulting in large posture errors under external loads. In this paper, we propose a novel structural primitive, the Distal-Stable Beam, which achieves a strong stiffness gradient through purely geometric design, maintaining compliance in the intermediate section while ensuring high distal rigidity. The structure consists of two parallel rods and one convergent rod constrained by guide disks, introducing geometric coupling that suppresses deformation modes and preserves distal posture. Experiments show that the distal stiffness is 12 times higher than at the center, corresponding to an approximately 100-fold improvement over a conventional cantilever beam. The proposed mechanism enables simultaneous compliance and distal stability without active stiffness modulation, providing a new design approach for continuum robots requiring both safety and precision. |
| title | Distal-Stable Beam for Continuum Robots |
| topic | Robotics |
| url | https://arxiv.org/abs/2604.01490 |