Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Preprint |
| Published: |
2026
|
| Subjects: | |
| Online Access: | https://arxiv.org/abs/2604.13917 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1866914475708252160 |
|---|---|
| author | Gast, Florian Dörpinghaus, Meik Fettweis, Gerhard |
| author_facet | Gast, Florian Dörpinghaus, Meik Fettweis, Gerhard |
| contents | Future mobile networks must achieve substantial improvements in energy efficiency to offset the anticipated traffic growth. Despite this requirement, many discussions regarding physical layer design remain primarily focused on peak data rates and spectral efficiency, even though typical network operation is dominated by low-data-rate regimes. To address this mismatch, the Gearbox-PHY was proposed as an energy-efficient physical layer architecture that dynamically switches between modulation schemes and their associated analog front ends in order to adapt to varying operating requirements. This paper quantifies the achievable energy savings by jointly modeling front end power consumption and hardware-aware spectral efficiency to formulate an energy-per-bit minimization problem. To move beyond idealized assumptions, non-ideal hardware effects, including oscillator phase noise and limited quantizer resolution, are incorporated. These impairments simultaneously affect power consumption and achievable spectral efficiency, thereby introducing trade-offs between front end complexity, hardware non-linearities, spectral efficiency, and energy efficiency. Numerical results demonstrate that the Gearbox-PHY enables significant energy savings, particularly at low data rates. Evaluations with spatially distributed users confirm that gains of up to two orders of magnitude persist in a cellular deployment scenario. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2604_13917 |
| institution | arXiv |
| publishDate | 2026 |
| record_format | arxiv |
| spellingShingle | Energy-Efficient Mobile Communications using an Adaptive Gearbox-PHY under Hardware Constraints Gast, Florian Dörpinghaus, Meik Fettweis, Gerhard Signal Processing Future mobile networks must achieve substantial improvements in energy efficiency to offset the anticipated traffic growth. Despite this requirement, many discussions regarding physical layer design remain primarily focused on peak data rates and spectral efficiency, even though typical network operation is dominated by low-data-rate regimes. To address this mismatch, the Gearbox-PHY was proposed as an energy-efficient physical layer architecture that dynamically switches between modulation schemes and their associated analog front ends in order to adapt to varying operating requirements. This paper quantifies the achievable energy savings by jointly modeling front end power consumption and hardware-aware spectral efficiency to formulate an energy-per-bit minimization problem. To move beyond idealized assumptions, non-ideal hardware effects, including oscillator phase noise and limited quantizer resolution, are incorporated. These impairments simultaneously affect power consumption and achievable spectral efficiency, thereby introducing trade-offs between front end complexity, hardware non-linearities, spectral efficiency, and energy efficiency. Numerical results demonstrate that the Gearbox-PHY enables significant energy savings, particularly at low data rates. Evaluations with spatially distributed users confirm that gains of up to two orders of magnitude persist in a cellular deployment scenario. |
| title | Energy-Efficient Mobile Communications using an Adaptive Gearbox-PHY under Hardware Constraints |
| topic | Signal Processing |
| url | https://arxiv.org/abs/2604.13917 |