Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Preprint |
| Published: |
2026
|
| Subjects: | |
| Online Access: | https://arxiv.org/abs/2604.23618 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1866917437172088832 |
|---|---|
| author | Khan, Sohail Wang, Zengbo Yang, Qingshan Yue, Liyang |
| author_facet | Khan, Sohail Wang, Zengbo Yang, Qingshan Yue, Liyang |
| contents | A microbubble is, in essence, a fully enclosed thin-walled microcavity. Unlike spherical microbubbles formed by expansions, 3D printing enables the free definition of their geometry, allowing precise control over shape and dimensions during fabrication. However, the geometric nature of microbubbles poses significant challenges for conventional photoresist-based lithographic microfabrication due to their fragile thin-walls, enclosed hollow volumes, and high sensitivity to mechanical stresses. These characteristics prevent developer solvents from accessing the internal cavities to remove unexposed photoresist. Two-photon polymerisation (2PP) is a laser-based 3D microprinting technique capable of sub-diffraction-limited resolution, offering exceptional design freedom for fabricating complex micro-architectures in photoresists. In this study, we demonstrate a 2PP-based method that overcomes these limitations and, for the first time, enables the successful fabrication of cubic microbubbles with ultra-high-aspect-ratio thin walls and fully enclosed microcavities using high-viscosity SU-8 2050 photoresist. The optimised process parameters and structural design facilitate efficient extraction of unexposed photoresist from the cavity interior while achieving a thin-wall ultra-high aspect ratio of approximately 340:1. The hollow nature and mechanical integrity of the printed structures were experimentally confirmed using micromanipulator-based probing. The proposed method maintains excellent dimensional accuracy and significantly reduces printing time for large-scale and high-count builds in 2PP processes. Such microbubbles are fundamental building blocks for optical resonators, microelectromechanical systems (MEMS) pressure sensors, microfluidic reaction chambers, and emerging metamaterials. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2604_23618 |
| institution | arXiv |
| publishDate | 2026 |
| record_format | arxiv |
| spellingShingle | Method for 3D printing of cubic microbubbles: fully enclosed thin-walled microcavities with ultra-high aspect ratios Khan, Sohail Wang, Zengbo Yang, Qingshan Yue, Liyang Optics A microbubble is, in essence, a fully enclosed thin-walled microcavity. Unlike spherical microbubbles formed by expansions, 3D printing enables the free definition of their geometry, allowing precise control over shape and dimensions during fabrication. However, the geometric nature of microbubbles poses significant challenges for conventional photoresist-based lithographic microfabrication due to their fragile thin-walls, enclosed hollow volumes, and high sensitivity to mechanical stresses. These characteristics prevent developer solvents from accessing the internal cavities to remove unexposed photoresist. Two-photon polymerisation (2PP) is a laser-based 3D microprinting technique capable of sub-diffraction-limited resolution, offering exceptional design freedom for fabricating complex micro-architectures in photoresists. In this study, we demonstrate a 2PP-based method that overcomes these limitations and, for the first time, enables the successful fabrication of cubic microbubbles with ultra-high-aspect-ratio thin walls and fully enclosed microcavities using high-viscosity SU-8 2050 photoresist. The optimised process parameters and structural design facilitate efficient extraction of unexposed photoresist from the cavity interior while achieving a thin-wall ultra-high aspect ratio of approximately 340:1. The hollow nature and mechanical integrity of the printed structures were experimentally confirmed using micromanipulator-based probing. The proposed method maintains excellent dimensional accuracy and significantly reduces printing time for large-scale and high-count builds in 2PP processes. Such microbubbles are fundamental building blocks for optical resonators, microelectromechanical systems (MEMS) pressure sensors, microfluidic reaction chambers, and emerging metamaterials. |
| title | Method for 3D printing of cubic microbubbles: fully enclosed thin-walled microcavities with ultra-high aspect ratios |
| topic | Optics |
| url | https://arxiv.org/abs/2604.23618 |