Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Dataset Open Access |
| Language: | en |
| Published: |
PANGAEA
2013
|
| Subjects: | |
| Online Access: | https://doi.org/10.1594/PANGAEA.812064 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1867170465530773504 |
|---|---|
| author | Lefebvre, Alice Ernstsen, Verner Brandbyge Winter, Christian |
| author_facet | Lefebvre, Alice Ernstsen, Verner Brandbyge Winter, Christian |
| collection | Datos científicos de ciencias marinas y ambientales |
| contents | The hydraulic effect of asymmetric compound bedforms on tidal currents was assessed from field measurements of flow velocity in the Knudedyb tidal inlet, Denmark. Large asymmetric bedforms with smaller superimposed ones are a common feature of sandy shallow water environments and are known to act as hydraulic roughness elements in dependence with flow direction. The presence of a flow separation zone on the bedform lee was estimated through analysis of the measured velocity directions and the calculation of the flow separation line. The Law of the Wall was used to calculate roughness lengths and shear velocities from log-linear segments sought on transect-averaged and single-location velocity profiles. During the ebb tide a permanent flow separation zone was established over the steep (10-20°) lee sides of the ebb-oriented primary bedforms, which generated a consequent drag on the flow. During the flood, no flow separation was induced by the gentle (2°) lee side of the primary bedforms except over the steepest (10°) part of the lee side where a small separation zone was sometimes observed. As a result, hydraulic roughness was only due to the superimposed bedforms. The parameterized flow separation line was found to underestimate the length of the flow separation zone of the primary bedforms. A better estimation of the presence and shape of the flow separation zone over complex bedforms in a tidal environment still needs to be determined; in particular the relationship between flow separation zone and bedform geometry (asymmetry, relative height or slope of the lee side) is unclear. This would improve the prediction of complex bedform roughness in tidal flows. |
| format | Dataset Open Access |
| id | pangaea_https___doi_org_10_1594_PANGAEA_812064 |
| institution | PANGAEA |
| language | en |
| publishDate | 2013 |
| publisher | PANGAEA |
| record_format | pangaea |
| spellingShingle | Estimatin of roughness lengths with a ship-mounted ADCP from Knudedyb, Denmark in October 2009 Lefebvre, Alice Ernstsen, Verner Brandbyge Winter, Christian Center for Marine Environmental Sciences; MARUM The hydraulic effect of asymmetric compound bedforms on tidal currents was assessed from field measurements of flow velocity in the Knudedyb tidal inlet, Denmark. Large asymmetric bedforms with smaller superimposed ones are a common feature of sandy shallow water environments and are known to act as hydraulic roughness elements in dependence with flow direction. The presence of a flow separation zone on the bedform lee was estimated through analysis of the measured velocity directions and the calculation of the flow separation line. The Law of the Wall was used to calculate roughness lengths and shear velocities from log-linear segments sought on transect-averaged and single-location velocity profiles. During the ebb tide a permanent flow separation zone was established over the steep (10-20°) lee sides of the ebb-oriented primary bedforms, which generated a consequent drag on the flow. During the flood, no flow separation was induced by the gentle (2°) lee side of the primary bedforms except over the steepest (10°) part of the lee side where a small separation zone was sometimes observed. As a result, hydraulic roughness was only due to the superimposed bedforms. The parameterized flow separation line was found to underestimate the length of the flow separation zone of the primary bedforms. A better estimation of the presence and shape of the flow separation zone over complex bedforms in a tidal environment still needs to be determined; in particular the relationship between flow separation zone and bedform geometry (asymmetry, relative height or slope of the lee side) is unclear. This would improve the prediction of complex bedform roughness in tidal flows. |
| title | Estimatin of roughness lengths with a ship-mounted ADCP from Knudedyb, Denmark in October 2009 |
| topic | Center for Marine Environmental Sciences; MARUM |
| url | https://doi.org/10.1594/PANGAEA.812064 |