Seismic Data from MSM21/4 to Knipovich Ridge on the western Svalbard margin
Fuente:
PANGAEA
Guardado en:
| Autores principales: | , , , , , , |
|---|---|
| Formato: | Dataset Open Access |
| Lenguaje: | en |
| Publicado: |
PANGAEA
2015
|
| Materias: | |
| Acceso en línea: | |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| _version_ | 1867170058676994048 |
|---|---|
| author | Dumke, Ines Burwicz, Ewa Berndt, Christian Klaeschen, Dirk Feseker, Tomas Geissler, Wolfram H Sarkar, Sudipta |
| author_facet | Dumke, Ines Burwicz, Ewa Berndt, Christian Klaeschen, Dirk Feseker, Tomas Geissler, Wolfram H Sarkar, Sudipta |
| collection | Datos científicos de ciencias marinas y ambientales |
| contents | The seismic data were acquired north of the Knipovich Ridge on the western Svalbard margin during cruise MSM21/4. They were recorded using a Geometrics GeoEel streamer of either 120 channels (profiles p100-p208) or 88 channels (profiles p300-p805) with a group spacing of 1.56 m and a sampling rate of 2 kHz. A GI-Gun (2×1.7 l) with a main frequency of ~150 Hz was used as a source and operated at a shot interval of 6-8 s. Processing of profiles p100-p208 and p600-p805: Positions for each channel were calculated by backtracking along the profiles from the GI-Gun GPS positions. The shot gathers were analyzed for abnormal amplitudes below the seafloor reflection by comparing neighboring traces in different frequency bands within sliding time windows. To suppress surface-generated water noise, a tau-p filter was applied in the shot gather domain. Common mid-point (CMP) profiles were then generated through crooked-line binning with a CMP spacing of 1.5625 m. A zero-phase band-pass filter with corner frequencies of 60 Hz and 360 Hz was applied to the data. Based on regional velocity information from MCS data [Sarkar, 2012], an interpolated and extrapolated 3D interval velocity model was created below the digitized seafloor reflection of the high-resolution streamer data. This velocity model was used to apply a CMP stack and an amplitude-preserving Kirchhoff post-stack time migration. Processing of profiles p400-p500: Data were sampled at 0.5 ms and sorted into common midpoint (CMP) domain with a bin spacing of 5 m. Normal move out correction was carried out with a velocity of 1500 m s-1 and an Ormsby bandpass filter with corner frequencies at 40, 80, 600 and 1000 Hz was applied. The data were time migrated using the water velocity. |
| format | Dataset Open Access |
| id | pangaea_https___doi_org_10_1594_PANGAEA_847497 |
| institution | PANGAEA |
| language | en |
| publishDate | 2015 |
| publisher | PANGAEA |
| record_format | pangaea |
| spellingShingle | Seismic Data from MSM21/4 to Knipovich Ridge on the western Svalbard margin Dumke, Ines Burwicz, Ewa Berndt, Christian Klaeschen, Dirk Feseker, Tomas Geissler, Wolfram H Sarkar, Sudipta Comment; Date/Time of event; Date/Time of event 2; Event label; File name; File size; Latitude of event; Latitude of event 2; Longitude of event; Longitude of event 2; Maria S. Merian; MSM21/4; MSM21/4_548-1; MSM21/4_562-1; MSM21/4_608-1; MSM21/4_619-1; MSM21/4_646-1; MSM21/4_651-1; North Greenland Sea; Seismic profile P100-P102; Seismic profile P200-P208; Seismic profile P400, P500; Seismic profile P600; Seismic profile P700-P706; Seismic profile P800-P805; Seismic reflection profile; SEISREFL; Uniform resource locator/link to sgy data file The seismic data were acquired north of the Knipovich Ridge on the western Svalbard margin during cruise MSM21/4. They were recorded using a Geometrics GeoEel streamer of either 120 channels (profiles p100-p208) or 88 channels (profiles p300-p805) with a group spacing of 1.56 m and a sampling rate of 2 kHz. A GI-Gun (2×1.7 l) with a main frequency of ~150 Hz was used as a source and operated at a shot interval of 6-8 s. Processing of profiles p100-p208 and p600-p805: Positions for each channel were calculated by backtracking along the profiles from the GI-Gun GPS positions. The shot gathers were analyzed for abnormal amplitudes below the seafloor reflection by comparing neighboring traces in different frequency bands within sliding time windows. To suppress surface-generated water noise, a tau-p filter was applied in the shot gather domain. Common mid-point (CMP) profiles were then generated through crooked-line binning with a CMP spacing of 1.5625 m. A zero-phase band-pass filter with corner frequencies of 60 Hz and 360 Hz was applied to the data. Based on regional velocity information from MCS data [Sarkar, 2012], an interpolated and extrapolated 3D interval velocity model was created below the digitized seafloor reflection of the high-resolution streamer data. This velocity model was used to apply a CMP stack and an amplitude-preserving Kirchhoff post-stack time migration. Processing of profiles p400-p500: Data were sampled at 0.5 ms and sorted into common midpoint (CMP) domain with a bin spacing of 5 m. Normal move out correction was carried out with a velocity of 1500 m s-1 and an Ormsby bandpass filter with corner frequencies at 40, 80, 600 and 1000 Hz was applied. The data were time migrated using the water velocity. |
| title | Seismic Data from MSM21/4 to Knipovich Ridge on the western Svalbard margin |
| topic | Comment; Date/Time of event; Date/Time of event 2; Event label; File name; File size; Latitude of event; Latitude of event 2; Longitude of event; Longitude of event 2; Maria S. Merian; MSM21/4; MSM21/4_548-1; MSM21/4_562-1; MSM21/4_608-1; MSM21/4_619-1; MSM21/4_646-1; MSM21/4_651-1; North Greenland Sea; Seismic profile P100-P102; Seismic profile P200-P208; Seismic profile P400, P500; Seismic profile P600; Seismic profile P700-P706; Seismic profile P800-P805; Seismic reflection profile; SEISREFL; Uniform resource locator/link to sgy data file |
| url | https://doi.org/10.1594/PANGAEA.847497 |