Multibeam bathymetry raw data (Kongsberg EM 122 entire dataset) of RV METEOR during cruise M167
Fuente:
PANGAEA
Guardado en:
| Autor principal: | |
|---|---|
| Formato: | Dataset Open Access |
| Lenguaje: | en |
| Publicado: |
PANGAEA
2021
|
| Materias: | |
| Acceso en línea: | |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| _version_ | 1867171030012788736 |
|---|---|
| author | Menapace, Walter |
| author_facet | Menapace, Walter |
| collection | Datos científicos de ciencias marinas y ambientales |
| contents | Raw bathymetry based on acquisition recorded during Meteor expedition M167 between 15.10.2020 and 31.10.2020 in the Alboran Sea and Gulf of Cadiz. The aim of the cruise was to investigate the mud volcanoes of the region. The EM122 system is a hull-mounted deep water MBES providing accurate bathymetric mapping down to full ocean depth. The system contains two linear transducer arrays in a Mills cross configuration with separate units for transmitting and receiving. The EM122 system used a nominal frequency of 12 kHz with a beam width configuration of 2° (TX) by 2° (RX). For beam spacing the "high-density-equidistant" mode was chosen, which provides 432 independent depth values (soundings) perpendicular to the track for each ping. Using the two-way-travel-time and the beam angle known for each beam, and considering the ray bending due to refraction in the water column by sound speed variations, depth and position are calculated for each beam. A combination of amplitude (for the central beams) and phase (slant beams) is used to provide a measurement accuracy practically independent of the beam pointing angle. Furthermore, the EM122 system applies the "dual swath" technology: instead of one ping two pings are simultaneously transmitted and recorded, one slightly tilted forward and the second backward. This enables a denser bottom coverage which allows higher survey speeds. For multibeam mapping surveys speeds of 9 to 11 knots were carried out. The Ping Mode was set to Auto, which enabled the system to use CW (continuous wave) pulses in shallow modes and FM or "chirp" pulses in deep modes. es. FM or "chirp" pulses transmit more energy into the water, thus enabling greater ranges of the beams leading to a better across-track coverage of the seafloor particularly at greater depth. The collected depth data from each sounding also contains the amplitude of the return sound pulse, which is called backscatter data. The backscatter signal depends on the physical nature of the seafloor, orientation of the illuminate surface and the frequency and angle used. Acoustic backscatter data are used for classifying seafloor types: a weak return signal (low amplitude) indicates a soft-bottom substrate, and a strong return signal (high amplitude) indicates a hard-bottom substrate. Monitoring and quality control of the data was conducted with the Kongsberg Seafloor Information System (SIS). The software controls the sector coverage (angle, beam spacing), depth settings (swath mode, ping mode) and transmission control (pitch stabilization). The data was stored every 30 minutes as an *.ALL file with all required information about ship motion, GPS, vessel speed, number of beams, total time, and track. During data acquisition, sound velocity measurements were applied on the data for data calibration. Sound velocity raw and processed data files are part of this dataset. The multibeam data was post-processed with the MB-System (Caress and Chayes, 1996) and the Generic Mapping Tool software (GMT; Wessel and Smith, 1998). For more details on data acquisition please see the M167 cruise report. |
| format | Dataset Open Access |
| id | pangaea_https___doi_org_10_1594_PANGAEA_938121 |
| institution | PANGAEA |
| language | en |
| publishDate | 2021 |
| publisher | PANGAEA |
| record_format | pangaea |
| spellingShingle | Multibeam bathymetry raw data (Kongsberg EM 122 entire dataset) of RV METEOR during cruise M167 Menapace, Walter Alboran Sea; Bathymetry; Binary Object; Binary Object (File Size); Binary Object (Media Type); Data file recording distance; Data file recording duration; DATE/TIME; ELEVATION; Event label; File content; GeoB24201-2; GeoB24204-2; GeoB24206-2; GeoB24224-3; GeoB24231-3; GPF 18-2_040; Gulf of Cádiz, Atlantic Ocean; KEM122; Kongsberg datagram raw file name; KONGSBERG EM122; LATITUDE; LONGITUDE; M167; M167_0_Underway-2; M167_1-1; M167_32-2; M167_42-2; M167_7-1; M167_8-1; Meteor (1986); Multibeam Echosounder; Number of pings; Ship speed; Start of data file, depth; Start of data file, heading; Start of data file recording, date/time; Start of data file recording, latitude; Start of data file recording, longitude; Stop of data file, depth; Stop of data file, heading; Stop of data file recording, date/time; Stop of data file recording, latitude; Stop of data file recording, longitude; XBT Raw bathymetry based on acquisition recorded during Meteor expedition M167 between 15.10.2020 and 31.10.2020 in the Alboran Sea and Gulf of Cadiz. The aim of the cruise was to investigate the mud volcanoes of the region. The EM122 system is a hull-mounted deep water MBES providing accurate bathymetric mapping down to full ocean depth. The system contains two linear transducer arrays in a Mills cross configuration with separate units for transmitting and receiving. The EM122 system used a nominal frequency of 12 kHz with a beam width configuration of 2° (TX) by 2° (RX). For beam spacing the "high-density-equidistant" mode was chosen, which provides 432 independent depth values (soundings) perpendicular to the track for each ping. Using the two-way-travel-time and the beam angle known for each beam, and considering the ray bending due to refraction in the water column by sound speed variations, depth and position are calculated for each beam. A combination of amplitude (for the central beams) and phase (slant beams) is used to provide a measurement accuracy practically independent of the beam pointing angle. Furthermore, the EM122 system applies the "dual swath" technology: instead of one ping two pings are simultaneously transmitted and recorded, one slightly tilted forward and the second backward. This enables a denser bottom coverage which allows higher survey speeds. For multibeam mapping surveys speeds of 9 to 11 knots were carried out. The Ping Mode was set to Auto, which enabled the system to use CW (continuous wave) pulses in shallow modes and FM or "chirp" pulses in deep modes. es. FM or "chirp" pulses transmit more energy into the water, thus enabling greater ranges of the beams leading to a better across-track coverage of the seafloor particularly at greater depth. The collected depth data from each sounding also contains the amplitude of the return sound pulse, which is called backscatter data. The backscatter signal depends on the physical nature of the seafloor, orientation of the illuminate surface and the frequency and angle used. Acoustic backscatter data are used for classifying seafloor types: a weak return signal (low amplitude) indicates a soft-bottom substrate, and a strong return signal (high amplitude) indicates a hard-bottom substrate. Monitoring and quality control of the data was conducted with the Kongsberg Seafloor Information System (SIS). The software controls the sector coverage (angle, beam spacing), depth settings (swath mode, ping mode) and transmission control (pitch stabilization). The data was stored every 30 minutes as an *.ALL file with all required information about ship motion, GPS, vessel speed, number of beams, total time, and track. During data acquisition, sound velocity measurements were applied on the data for data calibration. Sound velocity raw and processed data files are part of this dataset. The multibeam data was post-processed with the MB-System (Caress and Chayes, 1996) and the Generic Mapping Tool software (GMT; Wessel and Smith, 1998). For more details on data acquisition please see the M167 cruise report. |
| title | Multibeam bathymetry raw data (Kongsberg EM 122 entire dataset) of RV METEOR during cruise M167 |
| topic | Alboran Sea; Bathymetry; Binary Object; Binary Object (File Size); Binary Object (Media Type); Data file recording distance; Data file recording duration; DATE/TIME; ELEVATION; Event label; File content; GeoB24201-2; GeoB24204-2; GeoB24206-2; GeoB24224-3; GeoB24231-3; GPF 18-2_040; Gulf of Cádiz, Atlantic Ocean; KEM122; Kongsberg datagram raw file name; KONGSBERG EM122; LATITUDE; LONGITUDE; M167; M167_0_Underway-2; M167_1-1; M167_32-2; M167_42-2; M167_7-1; M167_8-1; Meteor (1986); Multibeam Echosounder; Number of pings; Ship speed; Start of data file, depth; Start of data file, heading; Start of data file recording, date/time; Start of data file recording, latitude; Start of data file recording, longitude; Stop of data file, depth; Stop of data file, heading; Stop of data file recording, date/time; Stop of data file recording, latitude; Stop of data file recording, longitude; XBT |
| url | https://doi.org/10.1594/PANGAEA.938121 |