XRF logging data from Nussloch loess cores
Fuente:
PANGAEA
Enregistré dans:
| Auteurs principaux: | , , , , , , , , , |
|---|---|
| Format: | Dataset Open Access |
| Langue: | en |
| Publié: |
PANGAEA
2025
|
| Sujets: | |
| Accès en ligne: | |
| Tags: |
Ajouter un tag
Pas de tags, Soyez le premier à ajouter un tag!
|
| _version_ | 1867169171761004544 |
|---|---|
| author | Rousseau, Denis-Didier Antoine, Pierre Pezard, Philippe Adrien Henry, Gilles Augustin, Laurent De Moya, Alain Moine, Olivier Ardito, Luigi Löscher, Manfred Le Moal, Frédéric |
| author_facet | Rousseau, Denis-Didier Antoine, Pierre Pezard, Philippe Adrien Henry, Gilles Augustin, Laurent De Moya, Alain Moine, Olivier Ardito, Luigi Löscher, Manfred Le Moal, Frédéric |
| collection | Datos científicos de ciencias marinas y ambientales |
| contents | The Nussloch Drilling Campaign (NUSS) involved drilling three loess sediment cores (85 mm in diameter) on April 21-25, 2019, on top of a loess hill at 49.31°N, 8.73°E, at an altitude of 215 m, close to the most recently described outcrop at the Nussloch reference site in Germany. Downhole logging was performed in the three drilling holes. Core S2, which has the most complete stratigraphy compared to previously published profiles, was analyzed using XRF core scanning. The name of the samples is given as NUSS for Nussloch, S2 for core S2, and C1-C11 for the subcore numbers. Depth is expressed in meters from the topsoil to the lowest level reached during drilling. The XRF data consists of the following elements: Na, Mg, Al, Si, P, S, Cl, K, Ca, Ti, Cr, Mn, Fe, Cu, Zn, Ni, Br, Rb, Sr, Zr, and Pb, in counts. These raw data counts are followed by the following ratios: Ca/Sr, Rb/Sr, Rb/K, Fe/Al, Fe/Mn, Si/Al, Ti/Al, Ti/Zr, Zr/Rb, and Ca/Al. Measurements were conducted every 1 cm from the top of the sub-cores. The measurements were performed with a resolution of 5mm on the AVAATECH Core Scanner at the EDYTEM laboratory in Chambéry in June 2015. This investigation aimed to conduct a comprehensive coring to acquire a sedimentary archive to ensure the preservation of this distinctive Nussloch record for future research projects. |
| format | Dataset Open Access |
| id | pangaea_https___doi_org_10_1594_PANGAEA_987316 |
| institution | PANGAEA |
| language | en |
| publishDate | 2025 |
| publisher | PANGAEA |
| record_format | pangaea |
| spellingShingle | XRF logging data from Nussloch loess cores Rousseau, Denis-Didier Antoine, Pierre Pezard, Philippe Adrien Henry, Gilles Augustin, Laurent De Moya, Alain Moine, Olivier Ardito, Luigi Löscher, Manfred Le Moal, Frédéric Aluminium; Argon; Bromine; Calcium; Calcium/Aluminium ratio; Calcium/Strontium ratio; CDRILL; Copper; Core drilling; DEPTH, sediment/rock; Germany; Iron; Iron/Aluminium ratio; Iron/Manganese ratio; last climatic cycle; Lead; loess paleosol sequence; Magnesium; Manganese; Nickel; NUSS_S2; Nussloch; Phosphorus; Potassium; Rubidium; Rubidium/Potassium ratio; Rubidium/Strontium ratio; Silicon; Silicon/Aluminium ratio; Sodium; Spectrum; Strontium; Sulfur; Titanium; Titanium/Aluminium ratio; Titanium/Zirconium ratio; X-ray fluorescence core scanner (XRF), Avaatech; XRF-core scanning; Zinc; Zirconium; Zirconium/Rubidium ratio The Nussloch Drilling Campaign (NUSS) involved drilling three loess sediment cores (85 mm in diameter) on April 21-25, 2019, on top of a loess hill at 49.31°N, 8.73°E, at an altitude of 215 m, close to the most recently described outcrop at the Nussloch reference site in Germany. Downhole logging was performed in the three drilling holes. Core S2, which has the most complete stratigraphy compared to previously published profiles, was analyzed using XRF core scanning. The name of the samples is given as NUSS for Nussloch, S2 for core S2, and C1-C11 for the subcore numbers. Depth is expressed in meters from the topsoil to the lowest level reached during drilling. The XRF data consists of the following elements: Na, Mg, Al, Si, P, S, Cl, K, Ca, Ti, Cr, Mn, Fe, Cu, Zn, Ni, Br, Rb, Sr, Zr, and Pb, in counts. These raw data counts are followed by the following ratios: Ca/Sr, Rb/Sr, Rb/K, Fe/Al, Fe/Mn, Si/Al, Ti/Al, Ti/Zr, Zr/Rb, and Ca/Al. Measurements were conducted every 1 cm from the top of the sub-cores. The measurements were performed with a resolution of 5mm on the AVAATECH Core Scanner at the EDYTEM laboratory in Chambéry in June 2015. This investigation aimed to conduct a comprehensive coring to acquire a sedimentary archive to ensure the preservation of this distinctive Nussloch record for future research projects. |
| title | XRF logging data from Nussloch loess cores |
| topic | Aluminium; Argon; Bromine; Calcium; Calcium/Aluminium ratio; Calcium/Strontium ratio; CDRILL; Copper; Core drilling; DEPTH, sediment/rock; Germany; Iron; Iron/Aluminium ratio; Iron/Manganese ratio; last climatic cycle; Lead; loess paleosol sequence; Magnesium; Manganese; Nickel; NUSS_S2; Nussloch; Phosphorus; Potassium; Rubidium; Rubidium/Potassium ratio; Rubidium/Strontium ratio; Silicon; Silicon/Aluminium ratio; Sodium; Spectrum; Strontium; Sulfur; Titanium; Titanium/Aluminium ratio; Titanium/Zirconium ratio; X-ray fluorescence core scanner (XRF), Avaatech; XRF-core scanning; Zinc; Zirconium; Zirconium/Rubidium ratio |
| url | https://doi.org/10.1594/PANGAEA.987316 |