Image de couverture de livre

Physical and mechanical characterization of concrete exposed to elevated temperatures by using ultrasonic pulse velocity

Fuente: Redalyc

Enregistré dans:

Détails bibliographiques
Auteur principal:	Ricardo Alfredo Cruz Hernández
Format:	Artículo científico
Langue:	en
Publié:	Universidad de Antioquia 2015
Sujets:	Ingeniería concrete Elevated temperature compressive strength ultrasonic pulse velocity
Accès en ligne:	Acceder al recurso
Tags:	Ajouter un tag Pas de tags, Soyez le premier à ajouter un tag!

Documents similaires

Comparative assessment of the mechanical behaviour of aerated lightweight concrete
par: R. A. Berenguer
Publié: (2018)

Compressive strength and microstructure of concretes manufactured with supersulfated cement based on materials of volcanic origin exposed to a sulfate environment
par: K. Cabrera Luna
Publié: (2019)

Correlations between water absorption, electrical resistivity and compressive strength of concrete with different contents of pozzolan
par: R. A. Medeiros Junior
Publié: (2019)

Performance under sulfate attack of concrete additioned with fluid catalytic cracking catalyst residue (FCC) and metakaolin (MK)
par: Nancy Torres Castellanos
Publié: (2013)

Simulation model to estimate bending overstrength in concrete elements
par: Alejandro Hernández-Martínez
Publié: (2017)

Diagnosis and Rehabilitation Possibilities of Real Reinforced Concrete Structure
par: ANA MARÍA CARVAJAL
Publié: (2008)

A Review Paper on Use of Recycled Aggregates in Concrete
par: Neeraj Kumar, et autres
Publié: (2022)

Study Mechanical Properties of Self-Compacting Concrete with Pozzolanic Additives Under Different Curing Conditions
par: Shiren O. Ahmed
Publié: (2021)

"Effect of Aggregate Extracted from Different Sources on Compressive Strength of Concrete for Urlabari Municipality of Morang, Nepal"
par: S.Khadka
Publié: (2022)

Concrete strength control: ABNT, ACI and EN comparative procedures. Site study case
par: R. Boni
Publié: (2018)

Real time signal compression in radar using FPGA
par: Enrique Escamilla-Hernández
Publié: (2008)

Utilization of Fly Ash and Phosphogypsum in Geopolymer Concrete
par: Singamala, Reddaiah Reddy
Publié: (2026)

Effect of specimen shape on the compressive parameters of steel fiber reinforced concrete after exposure to high temperatures
par: Ramoel Serafini
Publié: (2018)

Self-Compacting Concrete - A Critical Study of Nan Su Method At Wide Range of Packing Factors
par: Vijayakumar Halakatti
Publié: (2021)

Reliability analysis of the power-electronics stages in grid-connected PV systems
par: Freddy Chan Puc
Publié: (2008)

Analyzing two different data processing strategies for monitoring concrete structures using ultrasonic pulse velocity.
par: A. Lorenzi
Publié: (2012)

Investigation of mechanical properties of mortars with carbon fiber using multi slice computed tomography
par: Ozlem Celik Sola
Publié: (2017)

Initial study of Eucalyptus Wood Ash (EWA) as a mineral admixture in concrete
par: Álisson Franco do Couto
Publié: (2019)

Numerical study of few-cycle pulses generation from supercontinuum in ANDi-PCF
par: O. V. Shulika
Publié: (2013)

Assess of residual mechanical resistance of reinforced concrete beams after fire
par: R. G. Pereira
Publié: (2019)

Time-enhanced strength increase of an alluvial clay, typical of the northeastern region of Brazil, mixed with different cement dosages
par: Geraldo Vanzolini Moretti
Publié: (2013)

Construction of a femtosecond laser for the study of aberrations in optical systems
par: Miguel Ángel González-Galicia
Publié: (2013)

Physical and chemical effects of limestone filler on the hydration of steam cured cement paste and mortar
par: M. Aqel
Publié: (2020)

Micromechanical modeling of ultrasonic velocity for pore-structure and porosity characterization considering anisotropy in carbonate samples
par: J. Mena-Negrete
Publié: (2021)

Experimental study about the improvement of the mechanical properties of a concrete cobble using recyclable additives
par: Ricardo Andrés García-León
Publié: (2023)

EFFECT OF MICROWAVE TREATMENT ON THE IMPREGNABILITY AND MECHANICAL PROPERTIES OF Eucalyptus globulus WOOD
par: Eva Hermoso
Publié: (2016)

Comparative study on high-strength structural elements and CNT additions.
par: Jose Luis Fraga
Publié: (2016)

DEGREDATION PROPERTIES OF REINFORCED CONCRETE WALLS WITH OPENINGS
par: JULIAN CARRILLO
Publié: (2011)

EFFECT OF SEDIMENTARY AND METAMORPHIC AGGREGATE ON STATIC MODULUS OF ELASTICITY OF HIGH-STRENGTH CONCRETE
par: JUAN LIZARAZO-MARRIAGA
Publié: (2011)

Effect of partial substitution of Cr with Co on glass forming ability, mechanical and magnetic properties in Fe48Mo14Cr15-xCoxB6P8Si7Y2 bulk metallic glasses
par: Cosmin Codrean
Publié: (2022)

Estimation model of mechanical properties from the compressive strength values
par: Anderson Renato Vobornik Wolenski
Publié: (2020)

Prediction of modulus of elasticity and compressive strength of concrete specimens by means of artificial neural networks
par: José Fernando Moretti
Publié: (2016)

Study of the concrete’s compressive strength due to the combined effect of the water-cement ratio, the coarse-fine aggregate ratio and the source of the aggregates
par: Rómel Solís Carcaño
Publié: (2008)

High energy microwave weapon: Electromagnetic bomb
par: Goran M. Banjac
Publié: (2021)

Measure of maturity of the concrete structure
par: J. D. Sota
Publié: (2016)

On the influence of sugarcane bagasse ashes as a partial replacement of cement in compressive strength of mortars
par: R. A. Berenguer
Publié: (2018)

Evaluation of compressive strength and water absorption of soilcement bricks manufactured with addition of pet (polyethylene terephthalate) wastes
par: João Alexandre Paschoalin Filho
Publié: (2016)

Relationships between microfibril angle, modulus of elasticity and compressive strength in Eucalyptus wood
par: Paulo Ricardo Gherardi Hein
Publié: (2012)

EFFECT OF LOADING RATE ON MECHANICAL PROPERTIES OF MICRO-SIZED OAK WOOD
par: Ümit Büyüksari
Publié: (2017)

Polymeric fiber reinforced concrete exposed to fire
par: D. M. Dias
Publié: (2020)