Cover Image

DESIGN OF A TORQUE GENERATING MECHANISM

Fuente: Redalyc

Saved in:

Bibliographic Details
Main Author:	G. Aragón-González
Format:	Artículo científico
Language:	en
Published:	Universidad Nacional Autónoma de México 2007
Subjects:	Ingeniería Torque mechanisms bending of pipes
Online Access:	Acceder al recurso
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Non-linear analysis of reinforced concrete plates by the boundary element method and continuum damage mechanics
by: Gabriela Rezende Fernandes
Published: (2009)

Mechanical and acoustic characteristics of four wood species subjected to bending load
by: Wengang Hu
Published: (2023)

Design of boundary combined footings of rectangular shape using a new model
by: Arnulfo Luévanos-Rojas
Published: (2014)

EVALUATION OF THE TECHNOLOGICAL CHARACTERISTICS OF CLAY WHEN ADDING BUILDING MATERIALS TO MANUFACTURE STRUCTURAL PRODUCTS WITHOUT IMPLEMENTING A SINTERING PROCESS
by: Leonardo Cely Illera
Published: (2016)

Influence of geometric and loads parameters on excessive thinning and planning during tube bending process
by: Jorge Luis Hurtado
Published: (2011)

Influence of moisture content on the mechanical properties of Guadua Culms
by: Martha L Sánchez
Published: (2019)

Biaxial bending of slender HSC columns and tubes filled with concrete under short-and long-term loads: I) Theory
by: J. A. Rodríguez - Gutiérrez
Published: (2014)

Biaxial bending of slender HSC columns and tubes filled with concrete under short- and long-term loads: II) Verification
by: J. A. Rodríguez-Gutiérrez
Published: (2014)

Morphology change in nematic membranes induced by defects
by: Maiara Mitiko Taniguchi
Published: (2014)

Comparative assessment of corrosion of concrete reinforced with unprotected steel and hot-dip galvanized steel
by: Juan José Howland
Published: (2017)

Elastoplastic behavior of longitudinally stiffened girder webs subjected to patch loading and bending
by: Carlos Graciano
Published: (2015)

Prismatic structural members: Cross section flat and normal to the axis
by: Ramón Irles Más
Published: (2017)

Problem for Light Pipes and a Solution Proposal
by: G. Lizárraga-Lizárraga
Published: (2014)

A practical method to compute shear force and bending moment envelope curves for isostatic bridges subjected to vehicle live loads
by: Sulpicio Sánchez-Tizapa
Published: (2015)

Shear and longitudinal modulus of elasticity in wood: relations based on static bending tests
by: Francisco Antonio Rocco Lahr
Published: (2017)

Simulation model to estimate bending overstrength in concrete elements
by: Alejandro Hernández-Martínez
Published: (2017)

Optimal design for rectangular isolated footings using the real soil pressure
by: A. Luévanos-Rojas
Published: (2017)

PREDICTION OF BENDING PROPERTIES FOR BEECH LUMBER USING STRESS WAVE METHOD
by: Ergun Guntekin
Published: (2014)

Production of blockboard from small athel slats end-glued by different type of joint
by: Morteza Nazerian
Published: (2018)

INFLUENCE OF SPECIMEN ORIENTATION ON DETERMINATION OF ELESTICITY IN STATIC BENDING
by: Felipe Hideyoshi Icimoto
Published: (2015)

Experimental investigation on streamlines in a 180º sharp bend
by: Maryam Akbari
Published: (2017)

Optimization of pipe networks by genetic algorithm employing the colebrook correlation
by: Ricardo de Souza-Antunes
Published: (2019)

Racking and bending tests for prefabricated wall panels
by: Williams Munoz Toro
Published: (2007)

EFFECT OF NONDESTRUCTIVE TESTING OF LAMINATIONS ON THE BENDING PROPERTIES OF GLULAM BEAMS MADE FROM LOURO-VERMELHO (SEXTONIA RUBRA)
by: Ricardo Faustino Teles
Published: (2010)

Chemical variations in tension wood of poplar tree induced by intermittent bending, fertilizer and hormone treatments
by: Rahmatollah Gorgij
Published: (2022)

Methodology for the Selection of Trenchless Sewer Rehabilitation Technologies in Bogotá, Colombia
by: Edward Leonardo Tovar Romero
Published: (2021)

Experimental research of capillary structure technologies for heat pipes
by: Larissa Krambeck
Published: (2020)

A Mathematical Model for the Dimensioning of Combined Footings of Rectangular Shape
by: Arnulfo Luévanos Rojas
Published: (2016)

Automatic control system for torque national standard
by: J. Jesús Galván Mancilla
Published: (2004)

Genetic algorithms for the optimization of pipeline systems for liquid distribution
by: Paulo César Narváez
Published: (2004)

Selecting sintered capillary structure for heat pipes based on experimental thermal performance
by: Larissa Krambeck
Published: (2022)

Laser ultrasonic for Measurements of velocity distribution in pipes
by: Margarita Navarrete Montesinos
Published: (2004)

INFLUÊNCIA DA RAZÃO DE SOBREPOSIÇÃO NO TORQUE ESTÁTICO DA TURBINA SAVONIUS
by: L. S. BIANCHIN
Published: (2020)

A comparative study for the design of rectangular and circular isolated footings using new models
by: Arnulfo Luévanos-Rojas
Published: (2016)

Pipe Reconstruction from Point Cloud Data
by: Alex, Antje, et al.
Published: (2025)

Uniformly accelerated observers in special relativity
by: G.F. Torres del Castillo
Published: (2006)

Physical characteristics of pipes as indicators of structural state for decision-making considerations in sewer asset management
by: Liliana López-Kleine
Published: (2016)

Analysis of potential waste heat recovery from a stenter in a textile plant
by: Ricardo Mazo-Restrepo
Published: (2021)

Influence of gravity on heavy particle statistics in turbulent channel and pipe flow at matched Kàrmàn number
by: María J. Torres
Published: (2014)

Optimization of the distribution of steel pipes using a mathematical model
by: Miguel Mata-Pérez
Published: (2015)