Analysis of the effects of fabrication parameters on the mechanicalproperties of Areca fine fiber-reinforced phenol formaldehyde compositeusing Taguchi technique
Fuente:
Redalyc
Gespeichert in:
| 1. Verfasser: | |
|---|---|
| Format: | Artículo científico |
| Sprache: | en |
| Veröffentlicht: |
Universidad Nacional Autónoma de México
2017
|
| Schlagworte: | |
| Online-Zugang: | |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| _version_ | 1876459701482291200 |
|---|---|
| author | Chrispin Das MohanDas |
| author_facet | Chrispin Das MohanDas |
| contents | Analysis of the effects of fabrication parameters on the mechanicalproperties of Areca fine fiber-reinforced phenol formaldehyde compositeusing Taguchi technique Chrispin Das MohanDas Athijayamani Ayyanar Sidhardhan Susaiyappan Ramanathan Kalimuthu Ingeniería composites Areca fine fibers phenol formaldehyde mechanical properties taguchi’s experimental design The influences of fabrication parameters such as the fiber content, fiber length, alkali concentration and alkali treatment duration on the mechanicalproperties (tensile and flexural strength) of Areca fine fiber (AFF)-reinforced phenol formaldehyde (PF) composite were investigated in the presentstudy. The Taguchi’s experimental design (L27orthogonal array) was used to prepare the composites and to analyze the mechanical properties ofcomposites. The analysis of variance and signal-to-noise ratio with the Taguchi method were also used to understand the influence of the fabricationparameters on the tensile and flexural strength of the composite. Results show that the fiber content was the most influential fabrication parameteron both the tensile and flexural strength followed by the fiber length and the alkali treatment duration. The interaction between the fabricationparameters also has a significant effect on the tensile and flexural strength of the composite. The optimal combination of fabrication parameters toobtain the maximum tensile and flexural strength was found to be FL = 10 mm, FC = 35 vol%, AC = 6% and ATD = 1 h. 2017 artículo científico 1665-6423 https://www.redalyc.org/articulo.oa?id=47452572007 https://www.redalyc.org/journal/474/47452572007/ https://www.redalyc.org/journal/474/47452572007/html/ https://www.redalyc.org/journal/474/47452572007/47452572007.epub https://www.redalyc.org/journal/474/47452572007/movil en http://www.redalyc.org/revista.oa?id=474 Journal of Applied Research and Technology application/pdf Universidad Nacional Autónoma de México Journal of Applied Research and Technology (México) Num.4 Vol.15 |
| format | Artículo científico |
| id | redalyc_47452572007 |
| institution | Redalyc |
| language | en |
| publishDate | 2017 |
| publisher | Universidad Nacional Autónoma de México |
| spellingShingle | Analysis of the effects of fabrication parameters on the mechanicalproperties of Areca fine fiber-reinforced phenol formaldehyde compositeusing Taguchi technique Chrispin Das MohanDas Ingeniería composites Areca fine fibers phenol formaldehyde mechanical properties taguchi’s experimental design Analysis of the effects of fabrication parameters on the mechanicalproperties of Areca fine fiber-reinforced phenol formaldehyde compositeusing Taguchi technique Chrispin Das MohanDas Athijayamani Ayyanar Sidhardhan Susaiyappan Ramanathan Kalimuthu Ingeniería composites Areca fine fibers phenol formaldehyde mechanical properties taguchi’s experimental design The influences of fabrication parameters such as the fiber content, fiber length, alkali concentration and alkali treatment duration on the mechanicalproperties (tensile and flexural strength) of Areca fine fiber (AFF)-reinforced phenol formaldehyde (PF) composite were investigated in the presentstudy. The Taguchi’s experimental design (L27orthogonal array) was used to prepare the composites and to analyze the mechanical properties ofcomposites. The analysis of variance and signal-to-noise ratio with the Taguchi method were also used to understand the influence of the fabricationparameters on the tensile and flexural strength of the composite. Results show that the fiber content was the most influential fabrication parameteron both the tensile and flexural strength followed by the fiber length and the alkali treatment duration. The interaction between the fabricationparameters also has a significant effect on the tensile and flexural strength of the composite. The optimal combination of fabrication parameters toobtain the maximum tensile and flexural strength was found to be FL = 10 mm, FC = 35 vol%, AC = 6% and ATD = 1 h. 2017 artículo científico 1665-6423 https://www.redalyc.org/articulo.oa?id=47452572007 https://www.redalyc.org/journal/474/47452572007/ https://www.redalyc.org/journal/474/47452572007/html/ https://www.redalyc.org/journal/474/47452572007/47452572007.epub https://www.redalyc.org/journal/474/47452572007/movil en http://www.redalyc.org/revista.oa?id=474 Journal of Applied Research and Technology application/pdf Universidad Nacional Autónoma de México Journal of Applied Research and Technology (México) Num.4 Vol.15 |
| title | Analysis of the effects of fabrication parameters on the mechanicalproperties of Areca fine fiber-reinforced phenol formaldehyde compositeusing Taguchi technique |
| topic | Ingeniería composites Areca fine fibers phenol formaldehyde mechanical properties taguchi’s experimental design |
| url | https://www.redalyc.org/articulo.oa?id=47452572007 https://www.redalyc.org/journal/474/47452572007/ https://www.redalyc.org/journal/474/47452572007/html/ https://www.redalyc.org/journal/474/47452572007/47452572007.epub https://www.redalyc.org/journal/474/47452572007/movil |