Image de couverture de livre

Physical and mechanical properties of panel based on outer bark particles of white birch: mixed panels with wood particles versus wood fibres

Fuente: Redalyc

Enregistré dans:

Détails bibliographiques
Auteur principal:	Roger Pedieu
Format:	Artículo científico
Langue:	en
Publié:	Universidad del Bío Bío 2008
Sujets:	Agrociencias mixed panels Hydrophobic bark composite mechanical and physical properties
Accès en ligne:	Acceder al recurso
Tags:	Ajouter un tag Pas de tags, Soyez le premier à ajouter un tag!

Documents similaires

Variation throughout the tree stem in the physical-mechanical properties of the wood of Abies alba Mill. from the Spanish Pyrenees
par: Beatriz González-Rodrigo
Publié: (2013)

Influence of combined hygro-thermo-mechanical treatment on technical characteristics of poplar wood
par: Reza Hajihassani
Publié: (2018)

Recycling wood waste from construction and demolition to produce particleboards
par: Rafael da Rosa Azambuja
Publié: (2018)

Asbestos-free autoclaved wood fiber-cement sheets from recycled old corrugated containers and kraft pulp of Douglas fir: properties and scanning electron microscopy
par: Divino Eterno Teixeira
Publié: (2018)

Effect of chip temperature during bonding on particleboard properties
par: Abdullah İstek
Publié: (2023)

Physical, chemical and mechanical characterization of Acrocarpus fraxinifolius cultivated in Sao Paulo
par: Karina A. de Oliveira
Publié: (2022)

EFFECT OF THE BENCH SCALE EXTRACTION CONDITIONS ON Pinus radiata BARK EXTRACT YIELD, ANTIOXIDANT PROPERTIES AND COMPOSITION
par: Valentina Ramos
Publié: (2013)

Effect of Adding Oil Palm (Elaeis guineensis Jacq.) Mesocarp Fibers to Cement Composites
par: Luis Ferroel Gamarra-Romero
Publié: (2024)

The use of borax pentahydrate of inorganic filler in medium density fiberboard production
par: Mehmet Akgül
Publié: (2021)

Effective engineering properties in the design of storage structures of postharvest dry bean grain
par: Hakan Kibar
Publié: (2014)

Influence of the Type of Fibers and their Surface Treatment on the Properties of Biocomposite Panels
par: Martha Lissette Sánchez-Cruz
Publié: (2023)

Water absorption, thickness swelling and mechanical properties of cement bonded wood composite treated with water repellent
par: Semiha Yılmazer
Publié: (2023)

EVALUATION OF THE MECHANICAL AND PHYSICAL PROPERTIES OF PARTICLEBOARD MANUFACTURED FROM CANOLA (Brassica napus) STRAWS
par: Behzad Kord
Publié: (2016)

Comparison of phenolic extracts obtained of Pinus radiata bark from pulp and paper industry and sawmill industry
par: Estrella Aspé
Publié: (2011)

Durability of Eucalypts wood in soil bed and field decay tests
par: Pedro Nicó de Medeiros Neto
Publié: (2020)

EFFECTS OF THERMAL PRE-TREATMENT AND VARIABLES OF PRODUCTION ON PROPERTIES OF OSB PANELS OF Pinus taeda
par: Rafael Farinassi Mendes
Publié: (2013)

SOME TECHNOLOGICAL PROPERTIES OF LAMINATED VENEER LUMBER PRODUCED WITH FAST-GROWING Poplar AND Eucalyptus
par: Bekir Cihad Bal
Publié: (2016)

Improvement of gluing parameters in Edge Glued Panels
par: Dante Guilherme Lanhe
Publié: (2024)

Weathering performance of particleboards manufactured from blends of forest residues with Red pine (Pinus brutia) wood
par: H. Turgut Sahin
Publié: (2011)

Effect of pH and agitation time on combustible recovery and ash rejection in a coal sample using selective hydrophobic coagulation
par: Jorge Piñeres
Publié: (2018)

Physical, mechanical, and thermal characteristics of alkaline copper quaternary impregnated Oriental beech wood
par: Çağlar Altay
Publié: (2024)

XILOTECNIA OF THE WOOD OF Acacia Schaffneri FROM THE STATE OF HIDALGO, MEXICO
par: Roberto Machuca-Velasco
Publié: (2017)

Determination of uranium in tree bark samples by epithermal neutron activation analysis
par: Nicole Pereira de Lima
Publié: (2019)

PHYSICAL AND MECHANICAL PROPERTIES CORRELATION OF COFFEE FRUIT (Coffea arabica) DURING ITS RIPENING
par: IVÁN DARÍO ARISTIZÁBAL TORRES
Publié: (2012)

The chemical and morphological properties of oleaster
par: Mehmet Akgül
Publié: (2020)

Influence of accelerating admixtures in wood-cement panels: characteristics and properties
par: Adalberto Matoski
Publié: (2013)

Effect and mechanism of nanosize copper oxide on some physical and mechanical properties of flakeboards
par: Wei Gao
Publié: (2011)

Characterization of MDF produced with bolaina (Guazuma crinita Mart.) wood residues from plantation
par: José Alberto Cipra Rodriguez
Publié: (2022)

Using artificial neural networks in estimating wood resistance
par: Eder Pereira Miguel
Publié: (2018)

Sustainable denim fabric washing with post-used rubber shoe sole: An eco-friendly alternative of Pumice stone
par: Md. Rubel Alam, et autres
Publié: (2021)

Some physical and mechanical properties of Laminate Veneer Lumber reinforced with glass fiber mesh
par: Bekir Cihad Bal
Publié: (2024)

Synergistic influence of flame retardant additives and citric acid on the functional properties of rice husk/wood blended particleboards
par: Hui Ling Lau
Publié: (2021)

Investigation of wood properties and resistance of 25-year-old Gmelina arborea wood selected from crown region to termite attack
par: Samuel Oluyinka Olaniran
Publié: (2024)

The influence of alkali treatment on banana fibre's mechanical properties
par: Julio César Mejía Osorio
Publié: (2012)

Characterization of Acrocarpus fraxinifolius wood submitted to heat treatment
par: Carolina A. Barros Oliveira
Publié: (2022)

Mechanical parameters of thermally modified ash wood determined on compression in tangential direction
par: Waldemar Moliński
Publié: (2018)

Alternative model to determine the characteristic strength value of wood in the compression parallel to the grain
par: André Luis Christoforo
Publié: (2020)

Nanocellulose-reinforced phenol-formaldehyde resin for plywood panel production
par: Elaine Cristina Lengowski
Publié: (2021)

Quality characteristics of Moroccan sweet paprika (Capsicum annuum L.) at different sampling times
par: Naima ZAKI
Publié: (2013)

Plywoods of northeast Argentinian woods and soybean protein-based adhesives: Relationship between morphological aspects of veneers and shear strength values
par: E. S. Nicolao
Publié: (2022)