Weathering performance of particleboards manufactured from blends of forest residues with Red pine (Pinus brutia) wood
Fuente:
Redalyc
Gespeichert in:
| 1. Verfasser: | |
|---|---|
| Format: | Artículo científico |
| Sprache: | en |
| Veröffentlicht: |
Universidad del Bío Bío
2011
|
| Schlagworte: | |
| Online-Zugang: | |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| _version_ | 1876475680300990464 |
|---|---|
| author | H. Turgut Sahin |
| author_facet | H. Turgut Sahin |
| contents | Weathering performance of particleboards manufactured from blends of forest residues with Red pine (Pinus brutia) wood H. Turgut Sahin M. Burak Arslan Agrociencias red pine Pine cone pine bark cellulose particleboard Red pine cone and barks combined with red pine wood particles in various proportions were used as the raw materials for one and three layered experimental particleboard manufacturing in laboratory conditions. The pine cones and barks have higher lignin, but lower holocellulose content compare to wood. For bark-based panels, the highest MOR (2.52 MPa) corresponded to the lowest thickness swelling (9.3%) and marginally highest IB at 150ºC and 8% adhesive level. The 24 hour thickness swelling (TS) values obtained in this study were lower than the required TS-EN 312 (2005) value of 14% for all bark-based boards. However, the single-layer bark-based boards demonstrated higher mechanical properties compared to three-layer boards using similar manufacturing conditions. The boards exposed to atmospheric conditions have considerably darkened (-DL) and lower surface roughness changes. Meanwhile, for single-layer cone boards, the highest MOR (4.66 MPa) was found at 150ºC and 8% adhesive level, whereas the highest IB (1.54 MPa) and lowest TS (32.9%) were found at 150ºC and 10% adhesive content. The cone-based panels had higher surface color changes (lightness and total color difference) compared to red pine wood panels. The particleboards produced using cone in the proportion of wood resulted in lower TS compared to boards made from only red pine wood. 2011 artículo científico 0717-3644 https://www.redalyc.org/articulo.oa?id=48520966009 en http://www.redalyc.org/revista.oa?id=485 Maderas. Ciencia y Tecnología application/pdf Universidad del Bío Bío Maderas. Ciencia y Tecnología (Chile) Num.3 Vol.13 |
| format | Artículo científico |
| id | redalyc_48520966009 |
| institution | Redalyc |
| language | en |
| publishDate | 2011 |
| publisher | Universidad del Bío Bío |
| spellingShingle | Weathering performance of particleboards manufactured from blends of forest residues with Red pine (Pinus brutia) wood H. Turgut Sahin Agrociencias red pine Pine cone pine bark cellulose particleboard Weathering performance of particleboards manufactured from blends of forest residues with Red pine (Pinus brutia) wood H. Turgut Sahin M. Burak Arslan Agrociencias red pine Pine cone pine bark cellulose particleboard Red pine cone and barks combined with red pine wood particles in various proportions were used as the raw materials for one and three layered experimental particleboard manufacturing in laboratory conditions. The pine cones and barks have higher lignin, but lower holocellulose content compare to wood. For bark-based panels, the highest MOR (2.52 MPa) corresponded to the lowest thickness swelling (9.3%) and marginally highest IB at 150ºC and 8% adhesive level. The 24 hour thickness swelling (TS) values obtained in this study were lower than the required TS-EN 312 (2005) value of 14% for all bark-based boards. However, the single-layer bark-based boards demonstrated higher mechanical properties compared to three-layer boards using similar manufacturing conditions. The boards exposed to atmospheric conditions have considerably darkened (-DL) and lower surface roughness changes. Meanwhile, for single-layer cone boards, the highest MOR (4.66 MPa) was found at 150ºC and 8% adhesive level, whereas the highest IB (1.54 MPa) and lowest TS (32.9%) were found at 150ºC and 10% adhesive content. The cone-based panels had higher surface color changes (lightness and total color difference) compared to red pine wood panels. The particleboards produced using cone in the proportion of wood resulted in lower TS compared to boards made from only red pine wood. 2011 artículo científico 0717-3644 https://www.redalyc.org/articulo.oa?id=48520966009 en http://www.redalyc.org/revista.oa?id=485 Maderas. Ciencia y Tecnología application/pdf Universidad del Bío Bío Maderas. Ciencia y Tecnología (Chile) Num.3 Vol.13 |
| title | Weathering performance of particleboards manufactured from blends of forest residues with Red pine (Pinus brutia) wood |
| topic | Agrociencias red pine Pine cone pine bark cellulose particleboard |
| url | https://www.redalyc.org/articulo.oa?id=48520966009 |