Cover Image

Kraft scrap paper pulp as a substitute of wood chips in manufacture of particleboards resinated with hybrid pf/pmdi resin

Fuente: Redalyc

Saved in:

Bibliographic Details
Main Author:	Dorota Dukarska
Format:	Artículo científico
Language:	en
Published:	Universidad del Bío Bío 2018
Subjects:	Agrociencias utilization waste paper wood composites water resistance Mechanical properties
Online Access:	Acceder al recurso 1 Acceder al recurso 2 Acceder al recurso 3 Acceder al recurso 4 Acceder al recurso 5
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Papermaking as Potential Use of Fibers from Mexican Opuntia ficus-indica Waste
by: Citlali Colín-Chávez
Published: (2021)

Recycling wood waste from construction and demolition to produce particleboards
by: Rafael da Rosa Azambuja
Published: (2018)

Incorporation of industrial laundry sludge in the manufacture of particleboards
by: Luciana Cristina Soto Herek Rezende
Published: (2015)

Antique wood preparation by inorganic salts treatment and its performance
by: Ming Sun
Published: (2023)

Effect of chip temperature during bonding on particleboard properties
by: Abdullah İstek
Published: (2023)

Roughness study on homogeneous layer panels manufactured from treated wood waste
by: Maria Fátima do Nascimento
Published: (2017)

Quality of wood and pulp from a clone of Eucalyptus grandis planted at three locations
by: Cláudio Angeli Sansígolo
Published: (2011)

Properties of gypsum particleboard with added mineral dolomite
by: Omer Umit Yalçin
Published: (2022)

ESTABLISHMENT OF QUALITY CLASSES FOR HARDWOOD FLOORINGS BY SIMULATED USE
by: Mônica Bezerra de Oliveira
Published: (2019)

THE EFFECT OF MICRON SIZED WOOD FIBERS IN WOOD PLASTIC COMPOSITES
by: Lance W. Gallagher
Published: (2013)

Synergistic influence of flame retardant additives and citric acid on the functional properties of rice husk/wood blended particleboards
by: Hui Ling Lau
Published: (2021)

Influence of soil physicochemical properties on biometrical and physical features of persian oak wood
by: Huijun Dong
Published: (2023)

Mechanical characterization of a red cedar-low density polyethylene composite material
by: Cristian-Antonio Pedraza-Yepes
Published: (2022)

Estimation of moisture in wood chips by Near Infrared Spectroscopy
by: Evelize A. Amaral
Published: (2020)

An exploratory evaluation of the pulpability of Brachystegia spiciformis and Pericopsis angolensis from the angolan miombo woodlands
by: Lino Manuel Vicente Sangumbe
Published: (2018)

Combined effects of neem (Azadirachta indica) and sesame (Sesamum indicum) oil as a wood preservative on subterranean termites in the field
by: Zarnab Fatima
Published: (2021)

EFFECTS OF THINNING ON DIAMETER, HEARTWOOD, DENSITY AND DRYING DEFECTS OF GMELINA ARBOREA
by: Jonathan Vallejos
Published: (2015)

Changes in wood properties of chestnut wood structural elements with natural aging
by: Elif Topaloglu
Published: (2021)

Water absorption, thickness swelling and mechanical properties of cement bonded wood composite treated with water repellent
by: Semiha Yılmazer
Published: (2023)

تحقیقات علوم چوب و کاغذ ایران
Published: (2019)

Mine tailings-based geopolymers: Physical and mechanical properties
by: Akeed, Mahmoud H.
Published: (2022)

PHYSICO-MECHANICAL PROPERTIES OF PLYWOOD BONDED BY NANO CUPRIC OXIDE (CUO) MODIFIED PF RESINS AGAINST SUBTERRANEAN TERMITES
by: Wei Gao
Published: (2015)

Influence of combined hygro-thermo-mechanical treatment on technical characteristics of poplar wood
by: Reza Hajihassani
Published: (2018)

OSB sandwich panel with undulated core of balsa wood waste
by: Romulo Henrique B. Martins
Published: (2023)

Energy efficiency performance enhancement of industrial conventional wood drying kiln by adding forced ventilation and waste heat recovery system: A comparative study
by: Yang Meng
Published: (2019)

Variability in the physico-chemical properties of wood from Eucalyptus robusta depending on ecological growing conditions and forestry practices: The case of smallholdings in the Highlands of Madagascar
by: Zo Elia Mevanarivo
Published: (2020)

Properties of thermally modified teakwood
by: Elaine Cristina Lengowski
Published: (2021)

EFFECTS OF NANO-CLAY PARTICLES AND OXIDIZED POLYPROPYLENE POLYMERS ON IMPROVEMENT OF THE THERMAL PROPERTIES OF WOOD PLASTIC COMPOSITE
by: Hajar Reisi Nafchi
Published: (2015)

Diseño de estaciones de carga solar para bicicletas eléctricas
by: Pablo Andrés Cordero Alvarado
Published: (2020)

Statistical Determination of Factors for Best Marketing Practices of Urban and Reclaimed Wood as Raw Material
by: Alejandro Sánchez-Chinchilla
Published: (2020)

MECHANICAL PARAMETERS OF THERMALLY MODIFIED ASH WOOD DETERMINED BY COMPRESSION IN RADIAL DIRECTION
by: Waldemar Moliński
Published: (2016)

ANALYSIS OF THE MECHANICAL PROPERTIES OF WOOD-PLASTIC COMPOSITES BASED ON AGRICULTURE CHILI PEPPER WASTE
by: Delia Julieta Valles-Rosales
Published: (2016)

COMBINATION OF ENZYMATIC, MECHANICAL AND ULTRASONIC TREATMENTS FOR IMPROVEMENT OF THE PROPERTIES OF SECONDARY PULPS
by: Juliana Cristina da Silva
Published: (2013)

Natural durability of five tropical wood species in field decay tests
by: Felipe Gomes Batista
Published: (2022)

PROPERTIES OF CHARCOAL PRODUCED FROM REACTION WOOD IN TREES INCLINED DUE TO WIND
by: Walter Torezani Neto Boschetti
Published: (2017)

Chemical and structural changes of ocote pine (Pinus oocarpa) wood caused by thermal modification
by: Jhon F. Herrera-Builes
Published: (2022)

Investigation of wood properties and resistance of 25-year-old Gmelina arborea wood selected from crown region to termite attack
by: Samuel Oluyinka Olaniran
Published: (2024)

INFLUENCE OF Eucalyptus WOOD ADDITION TO URBAN WOOD WASTE DURING COMBUSTION
by: Ananias Francisco Dias Júnior
Published: (2017)

Exterior wood-concrete slabs, experimentation and modeling of mechanical behavior. Part 2.
by: Álvaro Peña
Published: (2015)

INVESTIGATION OF CHEMICAL CHANGES IN THE STRUCTURE OF THERMALLY MODIFIED WOOD
by: P Niemz
Published: (2010)