Image de couverture de livre

Assessment of evaporative cooling efficiency in greenhouses equiped with wetted porous plates

Fuente: Redalyc

Enregistré dans:

Détails bibliographiques
Auteur principal:	Flávio Alves-Damasceno
Format:	Artículo científico
Langue:	en
Publié:	Universidad Nacional de Colombia 2017
Sujets:	Ingeniería Greenhouse simulation mathematical modeling heat and mass transfer
Accès en ligne:	Acceder al recurso 1 Acceder al recurso 2 Acceder al recurso 3 Acceder al recurso 4 Acceder al recurso 5
Tags:	Ajouter un tag Pas de tags, Soyez le premier à ajouter un tag!

Documents similaires

Estimating fan and pad greenhouse reference evapotranspiration using FAO-56 - Penman-Monteith and a simplified heat transfer approach for predicting internal temperature
par: Gaafer, Amna Mohammed El Amin, et autres
Publié: (2024)

Dimensional analysis applied to jacketed shell and tube heat exchangers modeling
par: Andres A. Sánchez-Escalona
Publié: (2021)

Experimental results and modeling of poultry carcass cooling by water immersion
par: Bruno Augusto Mattar CARCIOFI
Publié: (2010)

Validation of a smooth configuration surface for compact heat exchangers using a numerical method
par: José-L. Leiro-Garrido
Publié: (2014)

Determination of the optimum louver angle of a louvered fin with elliptical tubes
par: Alberto Menéndez-Pérez
Publié: (2019)

Effect of burner angle on the heat transfer of a frit furnace
par: Jorge Luis Rentería Peláez
Publié: (2021)

Solution of the Inverse Bio-Heat Transfer Problem for a Simplified Dermatological Application: Case of Skin Cancer
par: José Manuel Luna
Publié: (2014)

Average Air Temperature Inside a Room With a Semitransparent Wall With a Solar Control Film: Effect of The Emissivity
par: J. Xamán
Publié: (2012)

Heat flow in the Colombian Caribbean from the bottom simulating reflector (BSR)
par: Caroll López
Publié: (2006)

Analysis of Flow and Heat Transfer in a Flat Solar Collector with Rectangular and Cylindrical Geometry Using CFD
par: Ángel Marroquín-De Jesús
Publié: (2013)

Computational simulation of concentration by osmotic evaporation of passion fruit juice (Passiflora edullis)
par: Freddy Forero-Longas
Publié: (2017)

Mathematical model for refinery furnaces simulation
par: Fabian-A. Díaz-Mateus
Publié: (2010)

A mesoscopic drying model applied to the growth rings of softwood: mesh generation and simulation results
par: Patrick Perré
Publié: (2008)

Modelling and simulation of a thermoelectric waste heat recovery system - TWRHS
par: Anderson Luis Oliveira Maran
Publié: (2021)

Numerical model for predicting and evaluating sand production in weakly consolidated reservoirs
par: Edson Felipe Araujo-Guerrero
Publié: (2022)

Simulation of the evaporation of drops from palm and castor oil biodiesels based on physical properties
par: Maria Luisa Botero
Publié: (2010)

3D discrete model for thermal contrast enhancement and defects depth estimation in CFRP slabs
par: Andrés D. Restrepo-Girón
Publié: (2014)

Towards a mathematical system for extension education
par: Kaul, P.N.
Publié: (1984)

CFD simulation of sugarcane bagasse combustion in an industrial grate boiler
par: Fabian Andrey Diaz-Mateus
Publié: (2018)

Journal of Heat and Mass Transfer Research
Publié: (2024)

Towards a mathematical system for extension education - II
par: Kaul, P.N., et autres
Publié: (1987)

Thermophysical properties of yacon (Smallanthus sonchifolius): experimental determination and effect of moisture content
par: Camila Augusto Perussello
Publié: (2015)

UNCOUPLING LAMINAR CONJUGATE HEAT TRANSFER THROUGH CHEBYSHEV POLYNOMIAL
par: ANTONIO J. BULA
Publié: (2010)

Analytical Heat Transfer
par: Han, Je-Chin, et autres
Publié: (2023)

Experiments and Modeling of the Cymbopogon winterianus Essential Oil Extraction by Steam Distillation
par: Eduardo Cassel
Publié: (2006)

Experimental Investigation of Single-Phase Convective heat transfer in Aluminium Milli-Channels
par: Antonio Ramos Archibold
Publié: (2008)

A Comparative study of solidification of Al-Cu alloy under flow of cylindrical radial heat and the unidirectional vertically
par: Jean Robert Pereira Rodrigues
Publié: (2014)

NUMERICAL SIMULATION OF THE MELTING OF PARTICLES INJECTED IN A PLASMA JET
par: Jorge Romero Rojas
Publié: (2009)

Numerical Study Using CFD on Heat Sinks for Electronic Components
par: Fernando Toapanta-Ramos
Publié: (2025)

Effect of Temperature-Time on the Sterilization Process for a Jacketed Bioreactor System: Application of a Ratkowsky Nonlinear Model
par: Jéssica Montero-Zamora
Publié: (2018)

Desarrollo, construcción y pruebas de una cocina-calentador de bajo costo y alta eficiencia energética para biomasas de reducido poder calorífico
par: Reinaldo Delgado-García
Publié: (2016)

Development of a water pipe network serving as a conductive cooling system applied to dairy farms
par: Fernando Rojano
Publié: (2019)

Mathematical Modeling of the Spread of Alcoholism Among Colombian College Students
par: Edgardo Pérez Reyes
Publié: (2020)

Design of longitudinal finned tubes adjusted with the Cesàro curve
par: Luis Eduardo Llano-Sánchez
Publié: (2018)

Global optimization algorithms applied in a parameter estimation strategy
par: David Matajira-Rueda
Publié: (2018)

مجله مهندسی شیمی ایران
Publié: (2022)

Methodology for the design of a thermal energy storage module for asolar tunnel dryer using phase change materials (PCM)
par: Mario Escobar-Ochoa
Publié: (2018)

Numerical Optimization of Geometric Parameters of Baffels Configuration in Shell and Tube Heat Exchanger
par: Sandeep Kumar, et autres
Publié: (2026)

Importance of taking into account the thermal mass in simulations for a non-air-conditioned house
par: Guadalupe Huelsz-Lesbros
Publié: (2022)

Influence of heat- and mass-transfer coupling on the optimal performance of a non-isothermal chemical engine
par: Yanhua Cai
Publié: (2010)