Physical-Mechanical properties of H-10 blocks manufactured in Norte of Santander, Colombia: a case study
Fuente:
Redalyc
Enregistré dans:
| Auteur principal: | |
|---|---|
| Format: | Artículo científico |
| Langue: | en |
| Publié: |
Universidad Nacional de Colombia
2021
|
| Sujets: | |
| Accès en ligne: | |
| Tags: |
Ajouter un tag
Pas de tags, Soyez le premier à ajouter un tag!
|
| _version_ | 1876449754192281600 |
|---|---|
| author | Ricardo Andrés García-Léon |
| author_facet | Ricardo Andrés García-Léon |
| contents | Physical-Mechanical properties of H-10 blocks manufactured in Norte of Santander, Colombia: a case study Ricardo Andrés García-Léon Nelson Afanador-García Gustavo Guerrero-Gómez Ingeniería 10 clay blocks mixture NTC standards This work presents the physical-mechanical properties of two types of H-10 blocks of six holes fabricated in two different companies in Norte de Santander, Colombia to provide a general visualization of the ceramic properties of masonry products base clay. Random samples of H-10 blocks were collected from the selected companies directly from the furnace as part of the experimental procedure, which was used to perform the physical-mechanical tests such as initial and final water absorption, morphology, resistance to compression, and flexion according to the NTC 4017 standard procedure, the results obtained were compared with the values established in the NTC 4205 standard procedure, used as non-structural masonry products for indoor or outdoor use. Finally, the SEM-EDS micrographs exposed the main characteristic chemical elements (Al, Si, O), defects on the surface of an H-10 block and the presence of typical phases (Quartz, Kaolinite, Illite, and Hematite) obtained by the XRD technique. 2021 artículo científico 0012-7353 https://www.redalyc.org/articulo.oa?id=49671317023 https://www.redalyc.org/journal/496/49671317023/ https://www.redalyc.org/journal/496/49671317023/html/ https://www.redalyc.org/journal/496/49671317023/49671317023.epub https://www.redalyc.org/journal/496/49671317023/movil 10.15446/dyna.v88n219.95687 en http://www.redalyc.org/revista.oa?id=496 Dyna application/pdf Universidad Nacional de Colombia Dyna (Colombia) Num.219 Vol.88 |
| format | Artículo científico |
| id | redalyc_49671317023 |
| institution | Redalyc |
| language | en |
| publishDate | 2021 |
| publisher | Universidad Nacional de Colombia |
| spellingShingle | Physical-Mechanical properties of H-10 blocks manufactured in Norte of Santander, Colombia: a case study Ricardo Andrés García-Léon Ingeniería 10 clay blocks mixture NTC standards Physical-Mechanical properties of H-10 blocks manufactured in Norte of Santander, Colombia: a case study Ricardo Andrés García-Léon Nelson Afanador-García Gustavo Guerrero-Gómez Ingeniería 10 clay blocks mixture NTC standards This work presents the physical-mechanical properties of two types of H-10 blocks of six holes fabricated in two different companies in Norte de Santander, Colombia to provide a general visualization of the ceramic properties of masonry products base clay. Random samples of H-10 blocks were collected from the selected companies directly from the furnace as part of the experimental procedure, which was used to perform the physical-mechanical tests such as initial and final water absorption, morphology, resistance to compression, and flexion according to the NTC 4017 standard procedure, the results obtained were compared with the values established in the NTC 4205 standard procedure, used as non-structural masonry products for indoor or outdoor use. Finally, the SEM-EDS micrographs exposed the main characteristic chemical elements (Al, Si, O), defects on the surface of an H-10 block and the presence of typical phases (Quartz, Kaolinite, Illite, and Hematite) obtained by the XRD technique. 2021 artículo científico 0012-7353 https://www.redalyc.org/articulo.oa?id=49671317023 https://www.redalyc.org/journal/496/49671317023/ https://www.redalyc.org/journal/496/49671317023/html/ https://www.redalyc.org/journal/496/49671317023/49671317023.epub https://www.redalyc.org/journal/496/49671317023/movil 10.15446/dyna.v88n219.95687 en http://www.redalyc.org/revista.oa?id=496 Dyna application/pdf Universidad Nacional de Colombia Dyna (Colombia) Num.219 Vol.88 |
| title | Physical-Mechanical properties of H-10 blocks manufactured in Norte of Santander, Colombia: a case study |
| topic | Ingeniería 10 clay blocks mixture NTC standards |
| url | https://www.redalyc.org/articulo.oa?id=49671317023 https://www.redalyc.org/journal/496/49671317023/ https://www.redalyc.org/journal/496/49671317023/html/ https://www.redalyc.org/journal/496/49671317023/49671317023.epub https://www.redalyc.org/journal/496/49671317023/movil |