Effect of use residual sludge from water treatment plants as a partial substitute for clay for refractory bricks production

Manufacture of lightweight clay bricks with improved thermal insulation properties via the incorporation of spent shea waste
by: A.N. Adazabra
Published: (2018)

Biosolids accumulation and biodegradation of domestic wastewater treatment plant sludge by developed liquid state bioconversion process using a batch fermenter
by: Zahangir, M., Fakhru’l, A., Molla, A
Published: (2003)

Mesophilic and thermophilic anaerobic digestion of primary and secondary sludge. Effect of pre-treatment at elevated temperature
by: Gavala, H., Yenal, U., Skiadas, I., Westermann, P., Ahring, B
Published: (2003)

Congruence in the performance of model nitrifying activated sludge plants located in Germany, Scotland and Spain
by: Christofi, N., Aspichueta, E., Dalzell, D., De la Sota, A., Etxebarria, J., Fernandes, T., Gutierrez, M., Morton, J., Obst, U., Schmellenkamp, P
Published: (2003)

Structural masonry walls exposed to high temperatures with thermal expansion control
by: J. Menegon
Published: (2020)

Thermal Improvement of Perforated Ceramic Bricks
by: W. BUSTAMANTE
Published: (2009)

Treatment of high saline textile wastewater by activated sludge microorganisms
by: Hanieh Mirbolooki
Published: (2017)

Eco-bricks: a sustainable substitute for construction material
by: Federico C. Antico
Published: (2017)

Ceramic bricks made from municipal solid waste incineration-derived clay and ashes: a quality study
by: César Augusto García Ubaque
Published: (2013)

Evaluation of Coal Bottom Ash for clay brick manufacturing: a preliminary study
by: Janneth Torres-Agredo
Published: (2021)

Chromium accumulation in maize and cowpea after successive applications of composted tannery sludge
by: Ricardo Silva de Sousa
Published: (2018)

Analysis of sludge using proton induced x-ray emission
by: Eliud Moreno
Published: (1996)

Effect of low ORP in anoxic sludge zone on excess sludge production in oxic-settling-anoxic activated sludge process
by: Saby, S., Djafer, M., Guang, C
Published: (2003)

Evaluation of compressive strength and water absorption of soilcement bricks manufactured with addition of pet (polyethylene terephthalate) wastes
by: João Alexandre Paschoalin Filho
Published: (2016)

Assessment of activated sludge microbial community analysis in full-scale biological wastewater treatment plants using patterns of fatty acid isopropyl esters (FAPEs)
by: Werker, A., Becker, J., Huitema, C
Published: (2003)

Visualization and Control System for a Wastewater Laboratory Plant with Biological Treatment*
by: Diego Fernando Ramírez-Jiménez
Published: (2024)

Removal of resin acids and sterols from pulp mill effluents by activated sludge treatment
by: Kostamo, A., Kukkonen, J
Published: (2003)

Recycling of agroindustrial solid wastes as additives in brick manufacturing for development of sustainable construction materials
by: Lisset Maritza Luna-Cañas
Published: (2014)

What are the current best practices for managing refractory shock in an emergency department setting?
by: Tripdatabase
Published: (2025)

Influence of the bed joint thickness on the bearing capacity of the brick masonry under compression loading: an ultrasound assessment
by: Silvia M. Monteagudo
Published: (2015)

The Out-of-Plane Bending Behavior of Brick Infill Walls Strengthened with Perforated Steel Plates
by: Bengi Aykac
Published: (2016)

Mechanical properties of load bearing walls made of uruguayan hollow ceramic bricks
by: Juan José Fontana Cabezas
Published: (2015)

PERFORMANCE OF A CONTACT STABILIZATION PROCESS FOR DOMESTIC WASTEWATER TREATMENT OF CALI, COLOMBIA
by: NANCY VÁSQUEZ SARRIA
Published: (2011)

Extraction of bioflocculants from activated sludge and their application to wastewater treatment
by: Vasilieva, Zh. V., et al.
Published: (2018)

Combined effects of neem (Azadirachta indica) and sesame (Sesamum indicum) oil as a wood preservative on subterranean termites in the field
by: Zarnab Fatima
Published: (2021)

Possible cause of excess sludge reduction in an oxic-settling-anaerobic activated sludge process (OSA process)
by: Guang, C., Kyoung, A., Saby, S., Brois, E., Djafer, M
Published: (2003)

Evaluation of coagulation sludge from raw water treated with Moringa oleifera for agricultural use
by: Jhon J. Feria-Díaz
Published: (2016)

Pretreatment on anaerobic sludge for enhancement of biohydrogen production from cassava processing wastewater
by: Franciele do Carmo Lamaison
Published: (2014)

Construction features of the historical architecture in the sea port city of Valparaiso: architect E.O.F. Harrington’s brick masonry buildings
by: Marcela Hurtado
Published: (2016)

Effect of silica fume and solid borax waste on compressive strength of fired briquettes
by: Ozlem Celik Sola
Published: (2017)

Quantification and analysis of the viability of (oo)cysts of pathogenic protozoa in sewage sludge
by: Raphael Corrêa Medeiros
Published: (2018)

Assessment of the Compressive Strength of Lime Mortars with Admixtures Subjected to Two Curing Environments
by: Andrés F. Espitia-Morales
Published: (2022)

Effect of extended idle conditions on structure and activity of granular activated sludge
by: Zhu, J., Wilderer, P
Published: (2003)

A knowledge-based approach to the deflocculation problem: integrating on-line, off-line, and heuristic information
by: Comas, J., Rodrguez, I., Sanchez, M., Cortes, U., Freixo, A., Arraez, J., Poch, M
Published: (2003)

Clay-Brick Firing in a High-Temperature Solar Furnace
by: G. Villeda-Muñoz
Published: (2011)

Bioadsorption of Cu2+, Ni2+, Zn2+ and Pb2+ using an activated sludge process
by: Jaime Dueñas-Moreno
Published: (2018)