Cover Image

Ceramic bricks made from municipal solid waste incineration-derived clay and ashes: a quality study

Fuente: Redalyc

Saved in:

Bibliographic Details
Main Author:	César Augusto García Ubaque
Format:	Artículo científico
Language:	en
Published:	Universidad Nacional de Colombia 2013
Subjects:	Ingeniería co brick firing incineration volatile ash
Online Access:	Acceder al recurso
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Evaluation of Coal Bottom Ash for clay brick manufacturing: a preliminary study
by: Janneth Torres-Agredo
Published: (2021)

Electricity generation potential from solid waste in three Colombian municipalities
by: Santiago Alzate Arias
Published: (2018)

Clay-Brick Firing in a High-Temperature Solar Furnace
by: G. Villeda-Muñoz
Published: (2011)

Structural masonry walls exposed to high temperatures with thermal expansion control
by: J. Menegon
Published: (2020)

Manufacture of lightweight clay bricks with improved thermal insulation properties via the incorporation of spent shea waste
by: A.N. Adazabra
Published: (2018)

Thermal Improvement of Perforated Ceramic Bricks
by: W. BUSTAMANTE
Published: (2009)

Mechanical and thermal performance of a geopolymeric and hybridmaterial based on fly ash
by: Diego Vásquez-Molina
Published: (2016)

Recycling of agroindustrial solid wastes as additives in brick manufacturing for development of sustainable construction materials
by: Lisset Maritza Luna-Cañas
Published: (2014)

Burnout synergic or inhibiting effects in combustion of coal - sawdust blends
by: C. Ulloa
Published: (2014)

Environmental and economic assessment of the co-firing of the coal-bagasse mixture in the Colombian sugarcane mills
by: Diego Andrés Rueda-Ordóñez
Published: (2019)

Mechanical properties of load bearing walls made of uruguayan hollow ceramic bricks
by: Juan José Fontana Cabezas
Published: (2015)

Evaluation of compressive strength and water absorption of soilcement bricks manufactured with addition of pet (polyethylene terephthalate) wastes
by: João Alexandre Paschoalin Filho
Published: (2016)

Effect of silica fume and solid borax waste on compressive strength of fired briquettes
by: Ozlem Celik Sola
Published: (2017)

Effect of use residual sludge from water treatment plants as a partial substitute for clay for refractory bricks production
by: Alejandra Sarabia-Guarín
Published: (2021)

Eco-bricks: a sustainable substitute for construction material
by: Federico C. Antico
Published: (2017)

Medical waste: the dark side of healthcare
by: Iris Borowy
Published: (2020)

Influence of the bed joint thickness on the bearing capacity of the brick masonry under compression loading: an ultrasound assessment
by: Silvia M. Monteagudo
Published: (2015)

The Out-of-Plane Bending Behavior of Brick Infill Walls Strengthened with Perforated Steel Plates
by: Bengi Aykac
Published: (2016)

FLEXIBILITY AT THE MARGIN AND LABOUR MARKET VOLATILITY: THE CASE OF SPAIN
by: HECTOR SALA
Published: (2009)

Construction features of the historical architecture in the sea port city of Valparaiso: architect E.O.F. Harrington’s brick masonry buildings
by: Marcela Hurtado
Published: (2016)

Assessment of the Compressive Strength of Lime Mortars with Admixtures Subjected to Two Curing Environments
by: Andrés F. Espitia-Morales
Published: (2022)

Waste-to-Energy Incinerators and Air Quality in Lagos Urban Slums: A Systematic Review ofLiterature
by: Okenwe, Chidera, et al.
Published: (2003)

Numerical simulation and fire experiment in residential dormitory
by: R. Tabaczenski
Published: (2019)

Optically stimulated luminescence response to ionizing radiation of red bricks (SiO2, Al2O3 and Fe2O3) used as building materials
by: G. Espinosa
Published: (2008)

Optically stimulated luminescence response to ionizing radiation of red bricks (SiO2, Al2O3 and Fe2O3) used as building materials
by: P. Santiago
Published: (2008)

Fire
Published: (2019)

Supplementary Data & Model: Reducing the Climate Impact of Residual Waste Treatment: A German Case Study on Carbon Management Strategies
by: Schmidt, Sarah, et al.
Published: (2025)

Performance of fire protective coatings in reinforced concrete elements submitted to high temperatures
by: C. Britez
Published: (2020)

Fire Ecology
Published: (2019)

A numerical approach for evaluating residual capacity of fire damaged concrete members
by: V. K. R. Kodur
Published: (2020)

Seismic behavior of reinforced concrete buildings using chained masonry walls randomly located
by: Abdelkader Nour
Published: (2023)

Comparative study of fire resistance and acoustic performance of ceramic brick walls in concern to NBR 15575 in residential buildings in Brazil
by: Sérgio Klippel Filho
Published: (2018)

Survival of trees after low-intensity surface fires in Great Smoky Mountains National Park
by: Harmon E. Mark
Published: (1940)

Durability of concrete mixtures with different contents of activated fly ash
by: M. Rendón Belmonte
Published: (2019)

Numerical-experimental analysis of ceramic block walls with different thicknesses at high temperatures
by: F. Bolina
Published: (2020)

Evaluación del poliestireno expandido con mortero de cemento expuesto al fuego
by: Francesco Rogontino
Published: (2017)

Análisis espacio-temporal de incendios forestales en la región del Maule, Chile
by: Ignacio Díaz-Hormazábal
Published: (2016)

Characterization of metallic particles extracted from fly ash of a thermoelectric plant in Boyacá-Colombia
by: William Alexander Bautista-Ruiz
Published: (2021)

Comparative study for chaotic behaviour in fire fighting robot
by: Magda Judith Morales Tavera
Published: (2011)

Resistencia de las conexiones tipo canal a elevadas temperaturas
by: Yisel Larrúa-Pardo
Published: (2015)