Cover Image

Strains on steel reinforcement of low-rise concrete walls during shake table tests

Fuente: Redalyc

Saved in:

Bibliographic Details
Main Author:	J. Carrillo
Format:	Artículo científico
Language:	en
Published:	Universidad Nacional de Colombia 2014
Subjects:	Ingeniería low welded yielding wire mesh rise housing
Online Access:	Acceder al recurso
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Low-speed finite element frontal impact analysis on aluminum alloy bumper made of 6063-T6
by: Javier Serrano-Pérez
Published: (2023)

Residential High-Rise Clusters as a Contemporary Planning Challenge in Manama
by: Florian Wiedmann
Published: (2015)

Inside High-Rise Housing
by: Nethercote, Megan
Published: (2022)

Technological aspects of assembling and processing narrow tubes (Short paper)
by: Gheorghe Sima
Published: (2012)

Characteristics and calibration of the mexican boundary layer wind tunnel at UNAM
by: Edmundo Amaya-Gallardo
Published: (2022)

PREDICTION OF FATIGUE LIFE FOR A TRANSVERSE FILLET WELDED JOINT AND ANALYSIS OF THE INFLUENCE OF CRACK ECCENTRICITY ON THE FAILURE
by: NELSON ARZOLA
Published: (2013)

Mechanical behavior in welding carbon steels at different levels of strain and carbon content.
by: X. Medina
Published: (2015)

Electrochemical behavior of dissimilar welded joints between ASTM A615 and AISI 304 with and without buttering using Inconel 182
by: J. C. I. Ramirez Soto
Published: (2019)

Reset Dynamics, Paper 5: Welding Between Structured Zeros and Structural Compatibility
by: pan, feiyue
Published: (2026)

LAYING THE FOUNDATIONS OF QUALITY: IMPLEMENTING A RESIDENTIAL CONSTRUCTION FRAMEWORK
by: Okonkwo, Emmanuel A`
Published: (2025)

IMPLEMENTING A RESIDENTIAL CONSTRUCTION QUALITY FRAMEWORK IN THE SOUTH AFRICAN BUILT ENVIRONMENT
by: Okonkwo Chukwudi, Emmanuel
Published: (2025)

DEVELOPMENT OF A WELDING PROCEDURE FOR MIL A 46100 ARMOR STEEL JOINTS USING GAS METAL ARC WELDING
by: DAVID MAZUERA ROBLEDO
Published: (2011)

Development of tubular coated electrodes for underwater wet welding
by: Alexandre Queiroz Bracarense
Published: (2009)

Ertragssteigerung der Lachsfischerei in der Ostsee durch Maschenvergrößerung möglich
by: Thurow, F.
Published: (1973)

Chord profile influence on the fatigue failure of a t-butt weld joint
by: Nelson Arzola de la Peña
Published: (2014)

Restoration of ancient bronze bells. Part I: powder metallurgy
by: Ernesto Ponce L.
Published: (2014)

Obtaining of components of fluxes for submerged arc welding from the carbothermic reduction of chromite refractory
by: Lorenzo Perdomo-González
Published: (2017)

Procedure for the obtaining by means of MFE of the thermal fields, deformations and residual tensions in welded unions
by: Yenei García Rodríguez
Published: (2007)

Sliding Base Structures
by: Hu, Hong-Song
Published: (2023)

Weldability examination of ASTM A 240 S41500 martensitic stainless steel by thermal cycles simulation testings
by: Alberto Velázquez-del Rosario
Published: (2015)

Study on welding thermal cycle and residual stress of UNS S32304 duplex stainless steel selected as external shield for a transport packaging of Mo-99
by: Evandro Giuseppe Betini
Published: (2019)

Wire board prototyping method
by: T. Baidyk
Published: (2006)

Restoration of ancient bronze bells. Part II: welding
by: Ernesto Ponce L.
Published: (2015)

Microstructure and mechanical properties of GTAW welded joints of AA6105 aluminum alloy
by: Minerva Dorta-Almenara
Published: (2016)

Konzept für eine bestandsschonendere Nutzung der Dorschvorkommen in der westlichen Ostsee
by: Ernst, Peter, et al.
Published: (2000)

Failure analysis of stainless steel lanyard wire rope
by: A. Sambasiva Rao
Published: (2018)

Modelo de elementos finitos para determinar el campo de temperatura en una costura de filete
by: F. Ramos Morales
Published: (2007)

Vehicle Handling Improvement with Steer-by-Wire System Using Hardware in the Loop Method
by: V. Tavoosi
Published: (2014)

Performance evaluation of a novel force measuring device for Friction Stir Welding (FSW) of aluminum alloys
by: María Zuluaga-Posada
Published: (2019)

DETERMINATION OF THE CRITICAL DISTANCE IN THE PROCEDURE OF EXPLOSIVE WELDING
by: Miloš S. Lazarević
Published: (2020)

The role of addition of Ni on the microstructure and mechanical behaviour of C-Mn weld metals
by: Vicente Braz Trindade
Published: (2007)

Structural analysis of a friction stir-welded small trailer
by: Fabio Bermúdez-Parra
Published: (2015)

Performance of a rutile electrode for SMAW under the effect of the composition of an applied peripheral coating
by: Amado Cruz-Crespo
Published: (2018)

Probabilistic assessment of the structural safety of a type of bolted and welded connections for seismic zones
by: David De León
Published: (2014)

Risk-Informed Selection of Steel Connections for Seismic Zones
by: D. De León-Escobedo
Published: (2011)

Analysis of impact toughness and the critical stress intensity factor KIc in ferrite-austenite welded joints with different heat input
by: Aleksandar G. Bukvić
Published: (2023)

Shore seines for reservoirs - Part 2 - Studies on optimum mesh size
by: Varghese, M.D., et al.
Published: (1983)

Effect of variation in mesh size on trawl efficiency
by: Naidu, R.M., et al.
Published: (1987)

Hanjie xuebao
Published: (2024)

Comparative study for application of polypropylene monofilament light mesh, polypropylene monofilament heavy mesh and self gripping polypropylene mesh in patients with inguinal hernia surgically treated with Lichtenstein technique
by: Gordana Bozinovks Beaka
Published: (2020)