Salvato in:
| Autore principale: | |
|---|---|
| Natura: | Artículo científico |
| Lingua: | en |
| Pubblicazione: |
Universidad Nacional de Colombia
2017
|
| Soggetti: | |
| Accesso online: | https://www.redalyc.org/articulo.oa?id=64350550005 |
| Tags: |
Aggiungi Tag
Nessun Tag, puoi essere il primo ad aggiungerne!!
|
| _version_ | 1866814397189455872 |
|---|---|
| author | N. Pino |
| author_facet | N. Pino |
| contents | Hydrodeoxygenation of furfuryl alcohol over Cu/MgAl and Cu/ZnAl catalysts derived from hydrotalcite-like precursors N. Pino G. Hincapié D. López Ingeniería bio copper Hydrotalcites cyclopentanol oil upgrading The aqueous phase hydrodeoxygenation (HDO) of furfuryl alcohol over Cu/MgAl and Cu/ZnAl catalysts with different Mg/Al and Zn/ Al molar ratios, were investigated. Mg-Al and Zn-Al mixed oxides derived from hydrotalcites precursors were used as supports, which were impregnated with an aqueous solution of copper nitrate by incipient wetness impregnation. The HDO reaction was carried out in a typical batch reactor at 5 MPa of H 2 and 200 °C for 4 h. Among the catalysts studied, the Cu/MgAl-0.5 catalyst exhibited the higher furfuryl alcohol conversion (86 %) and yield of cyclopentanol (35 %), which is the reaction product with the highest hydrogen- carbon (H/C) ratio. With the Cu/MgAl-3 catalyst a high cyclopentanone yield (67 %) was achieved. The results obtained, showed that copper supported on mixed oxides catalysts derived from hydrotalcite precursors are a promising alternative to improve the bio-oil quality. 2017 artículo científico 0120-5609 https://www.redalyc.org/articulo.oa?id=64350550005 en http://www.redalyc.org/revista.oa?id=643 Ingeniería e Investigación application/pdf Universidad Nacional de Colombia Ingeniería e Investigación (Colombia) Num.1 Vol.37 |
| format | Artículo científico |
| id | redalyc_64350550005 |
| language | en |
| publishDate | 2017 |
| publisher | Universidad Nacional de Colombia |
| spellingShingle | Hydrodeoxygenation of furfuryl alcohol over Cu/MgAl and Cu/ZnAl catalysts derived from hydrotalcite-like precursors N. Pino Ingeniería bio copper Hydrotalcites cyclopentanol oil upgrading Hydrodeoxygenation of furfuryl alcohol over Cu/MgAl and Cu/ZnAl catalysts derived from hydrotalcite-like precursors N. Pino G. Hincapié D. López Ingeniería bio copper Hydrotalcites cyclopentanol oil upgrading The aqueous phase hydrodeoxygenation (HDO) of furfuryl alcohol over Cu/MgAl and Cu/ZnAl catalysts with different Mg/Al and Zn/ Al molar ratios, were investigated. Mg-Al and Zn-Al mixed oxides derived from hydrotalcites precursors were used as supports, which were impregnated with an aqueous solution of copper nitrate by incipient wetness impregnation. The HDO reaction was carried out in a typical batch reactor at 5 MPa of H 2 and 200 °C for 4 h. Among the catalysts studied, the Cu/MgAl-0.5 catalyst exhibited the higher furfuryl alcohol conversion (86 %) and yield of cyclopentanol (35 %), which is the reaction product with the highest hydrogen- carbon (H/C) ratio. With the Cu/MgAl-3 catalyst a high cyclopentanone yield (67 %) was achieved. The results obtained, showed that copper supported on mixed oxides catalysts derived from hydrotalcite precursors are a promising alternative to improve the bio-oil quality. 2017 artículo científico 0120-5609 https://www.redalyc.org/articulo.oa?id=64350550005 en http://www.redalyc.org/revista.oa?id=643 Ingeniería e Investigación application/pdf Universidad Nacional de Colombia Ingeniería e Investigación (Colombia) Num.1 Vol.37 |
| title | Hydrodeoxygenation of furfuryl alcohol over Cu/MgAl and Cu/ZnAl catalysts derived from hydrotalcite-like precursors |
| topic | Ingeniería bio copper Hydrotalcites cyclopentanol oil upgrading |
| url | https://www.redalyc.org/articulo.oa?id=64350550005 |