Saved in:
Bibliographic Details
Main Author: N. Pino
Format: Artículo científico
Language:en
Published: Universidad Nacional de Colombia 2017
Subjects:
Online Access:https://www.redalyc.org/articulo.oa?id=64350550005
Tags: Add Tag
No Tags, Be the first to tag this record!
Table of Contents:
  • Hydrodeoxygenation of furfuryl alcohol over Cu/MgAl and Cu/ZnAl catalysts derived from hydrotalcite-like precursors N. Pino G. Hincapié D. López Ingeniería bio copper Hydrotalcites cyclopentanol oil upgrading The aqueous phase hydrodeoxygenation (HDO) of furfuryl alcohol over Cu/MgAl and Cu/ZnAl catalysts with different Mg/Al and Zn/ Al molar ratios, were investigated. Mg-Al and Zn-Al mixed oxides derived from hydrotalcites precursors were used as supports, which were impregnated with an aqueous solution of copper nitrate by incipient wetness impregnation. The HDO reaction was carried out in a typical batch reactor at 5 MPa of H 2 and 200 °C for 4 h. Among the catalysts studied, the Cu/MgAl-0.5 catalyst exhibited the higher furfuryl alcohol conversion (86 %) and yield of cyclopentanol (35 %), which is the reaction product with the highest hydrogen- carbon (H/C) ratio. With the Cu/MgAl-3 catalyst a high cyclopentanone yield (67 %) was achieved. The results obtained, showed that copper supported on mixed oxides catalysts derived from hydrotalcite precursors are a promising alternative to improve the bio-oil quality. 2017 artículo científico 0120-5609 https://www.redalyc.org/articulo.oa?id=64350550005 en http://www.redalyc.org/revista.oa?id=643 Ingeniería e Investigación application/pdf Universidad Nacional de Colombia Ingeniería e Investigación (Colombia) Num.1 Vol.37