Image de couverture de livre

Quality of wood and pulp from a clone of Eucalyptus grandis planted at three locations

Fuente: Redalyc

Enregistré dans:

Détails bibliographiques
Auteur principal:	Cláudio Angeli Sansígolo
Format:	Artículo científico
Langue:	en
Publié:	Universidade Federal de Lavras 2011
Sujets:	Agrociencias Kraft pulp Soil fertility wood properties
Accès en ligne:	Acceder al recurso
Tags:	Ajouter un tag Pas de tags, Soyez le premier à ajouter un tag!

Documents similaires

Chemical characteristics and Kraft pulping of tension wood from Eucalyptus globulus labill
par: María Graciela Aguayo
Publié: (2012)

Determining the Pulping Conditions and Properties of Unbleached Pulp from Uruguayan Pinus Taeda
par: Viviana Palombo
Publié: (2024)

Properties of bleached pulp sheets of avocado wood (Persea americana Mill.) pulped by Kraft and Soda processes
par: J.R. Sanjuán D.
Publié: (2006)

An exploratory evaluation of the pulpability of Brachystegia spiciformis and Pericopsis angolensis from the angolan miombo woodlands
par: Lino Manuel Vicente Sangumbe
Publié: (2018)

EFFECTS OF XYLAN IN EUCALYPTUS PULP PRODUCTION
par: Bianca Moreira Barbosa
Publié: (2016)

A PRELIMINARY INVESTIGATION OF NIGERIAN Gmelina arborea AND Bambusa vulgaris FOR PULP AND PAPER PRODUCTION
par: Mayowa Akeem Azeez
Publié: (2016)

Encapsulation of precipitated calcium carbonate fillers using carboxymethyl cellulose /polyaluminium chloride: preparation and its influence on mechanical and optical properties of paper
par: Hasan Mousavipazhouh
Publié: (2018)

Distinctive delignification with consecutive application of Geobacillus sp. 71 xylanase and Rhodococcus jostii rha1 lignin peroxidase
par: Aysegul Ozer
Publié: (2018)

Examining the efficiency of mechanic/enzymatic pretreatments in micro/nanofibrillated cellulose production
par: Ayhan Tozluoğlu
Publié: (2018)

QUALITY OF REACTION WOOD IN Eucalyptus TREES TILTED BY WIND FOR PULP PRODUCTION
par: Walter Torezani Neto Boschetti
Publié: (2017)

XILOTECNIA OF THE WOOD OF Acacia Schaffneri FROM THE STATE OF HIDALGO, MEXICO
par: Roberto Machuca-Velasco
Publié: (2017)

DECAY RESISTANCE OF WOOD IMPREGNATED WITH MONOETHANOLAMINE AND SODIUM BISULFITE PULPING BLACK LIQUORS
par: Hamid Reza Nayeri
Publié: (2017)

Lignin-enriched cellulose membranes for efficient removal of synthetic dyes from aqueous environments
par: Tkachenko, Oleg, et autres
Publié: (2025)

FTIR, BET, and DTA of materials and effects of parameters to isolate cellulose fibers from reed
par: Le Thi Thanh, Huong, et autres
Publié: (2024)

FTIR, TGA/DSC, BET, and WCA analyses of materials, as well as effects of parameters on isolating cellulose fibers from reed
par: Le Thi Thanh, Huong, et autres
Publié: (2024)

Removal of resin acids and sterols from pulp mill effluents by activated sludge treatment
par: Kostamo, A., Kukkonen, J
Publié: (2003)

Influences of the operating variables of acetosolv pulping on pulp properties of oil palm frond fibres
par: W.D. Wanrosli
Publié: (2011)

Characterization of MDF produced with bolaina (Guazuma crinita Mart.) wood residues from plantation
par: José Alberto Cipra Rodriguez
Publié: (2022)

تحقیقات علوم چوب و کاغذ ایران
Publié: (2019)

Comparative studies of fibres of woody species selected in relation to their paper-making potentials
par: Godswill C. Ajuziogu
Publié: (2020)

Bleached kraft pulp production from Pinus tecunumanii (Eguiluz e Perry)
par: Leonel F. Torres
Publié: (2005)

Análisis químico cuantitativo y condiciones de pulpaje kraft de colihue: Parte I
par: SILVANA MARIANI A.
Publié: (2004)

Recycling wood waste from construction and demolition to produce particleboards
par: Rafael da Rosa Azambuja
Publié: (2018)

Influence of soil physicochemical properties on biometrical and physical features of persian oak wood
par: Huijun Dong
Publié: (2023)

Variability in the physico-chemical properties of wood from Eucalyptus robusta depending on ecological growing conditions and forestry practices: The case of smallholdings in the Highlands of Madagascar
par: Zo Elia Mevanarivo
Publié: (2020)

EFFECTS OF THINNING ON DIAMETER, HEARTWOOD, DENSITY AND DRYING DEFECTS OF GMELINA ARBOREA
par: Jonathan Vallejos
Publié: (2015)

Changes in wood properties of chestnut wood structural elements with natural aging
par: Elif Topaloglu
Publié: (2021)

Kraft scrap paper pulp as a substitute of wood chips in manufacture of particleboards resinated with hybrid pf/pmdi resin
par: Dorota Dukarska
Publié: (2018)

Iranian Journal of Wood and Paper Industries
Publié: (2016)

Journal of Wood Science
Publié: (2020)

NANOFIBRILLATED CELLULOSE AS AN ADDITIVE FOR RECYCLED PAPER
par: Lívia Cássia Viana
Publié: (2018)

THE EFFECTS OF ALKALINE FILTRATE RECIRCULATION TOWARDS THE PROPERTIES OF LONG FIBER PULPS WITH OD(EPO)DED BLEACHING SEQUENCE
par: Luciana Cerqueira Souza
Publié: (2018)

Influence of combined hygro-thermo-mechanical treatment on technical characteristics of poplar wood
par: Reza Hajihassani
Publié: (2018)

Properties of thermally modified teakwood
par: Elaine Cristina Lengowski
Publié: (2021)

Cinética da remoção dos extrativos da madeira de Eucalyptus grandis durante polpação Kraft
par: Camila Sarto
Publié: (2010)

Classificação de clones de eucalyptus sp visando à produção de polpa celulósica
par: Maria Lucia Bianchi
Publié: (2004)

MECHANICAL PARAMETERS OF THERMALLY MODIFIED ASH WOOD DETERMINED BY COMPRESSION IN RADIAL DIRECTION
par: Waldemar Moliński
Publié: (2016)

THE EFFECT OF MICRON SIZED WOOD FIBERS IN WOOD PLASTIC COMPOSITES
par: Lance W. Gallagher
Publié: (2013)

Effect of time and storage conditions on the physical and physico-chemical characteristics of the pulp of yellow and purple passion fruit
par: Letícia da Silva ARAÚJO
Publié: (2017)

Investigation of wood properties and resistance of 25-year-old Gmelina arborea wood selected from crown region to termite attack
par: Samuel Oluyinka Olaniran
Publié: (2024)