Electron spatially fractionated radiation therapy using a clinically biocompatible 3D‐printed tungsten‐filament GRID
Fuente:
Wiley Open Access
Gespeichert in:
| Hauptverfasser: | Melody Liu, Zhengzheng Xu, Hualin Zhang, Brittney Chau, Lauren Lukas |
|---|---|
| Format: | Artículo Open Access |
| Veröffentlicht: |
Wiley
2026
|
| Schlagworte: | |
| Online-Zugang: | |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Ähnliche Einträge
Dosimetric characterization for GRID collimator‐based spatially fractionated radiation therapy: Dosimetric parameter acquisition and machine interchangeability investigation
von: Zhengzheng Xu, et al.
Veröffentlicht: (2024)
von: Zhengzheng Xu, et al.
Veröffentlicht: (2024)
Dosimetric impact of intrafraction patient motion on MLC‐based 3D‐conformal spatially fractionated radiation therapy treatment of large and bulky tumors
von: Josh Misa, et al.
Veröffentlicht: (2024)
von: Josh Misa, et al.
Veröffentlicht: (2024)
Development of a 3D‐printed phantom for total skin electron therapy dose assessment
von: Andrew Lee, et al.
Veröffentlicht: (2024)
von: Andrew Lee, et al.
Veröffentlicht: (2024)
Technical note: A comparison of in‐house 3D‐printed and commercially available patient‐specific skin collimators for use with electron beam therapy
von: Steven M. Herchko, et al.
Veröffentlicht: (2024)
von: Steven M. Herchko, et al.
Veröffentlicht: (2024)
Comprehensive clinical implementation, workflow, and FMEA of bespoke silicone bolus cast from 3D printed molds using open‐source resources
von: Dean Hobbis, et al.
Veröffentlicht: (2024)
von: Dean Hobbis, et al.
Veröffentlicht: (2024)
Clinical application of 3D‐printed bolus in postmastectomy radiotherapy
von: Qianqian Liu, et al.
Veröffentlicht: (2025)
von: Qianqian Liu, et al.
Veröffentlicht: (2025)
Quantifying stent‐induced dose perturbations in intravascular brachytherapy using 3D‐ printed phantoms and film dosimetry
von: Jessica S. Jung, et al.
Veröffentlicht: (2026)
von: Jessica S. Jung, et al.
Veröffentlicht: (2026)
A novel method to simulate radiographs of 3D printed objects
von: Maxwell C. Campbell, et al.
Veröffentlicht: (2025)
von: Maxwell C. Campbell, et al.
Veröffentlicht: (2025)
Deep learning‐based 3D dose reconstruction for intensity modulated radiation therapy using electronic portal imaging devices
von: Dong Yang, et al.
Veröffentlicht: (2025)
von: Dong Yang, et al.
Veröffentlicht: (2025)
Three discipline collaborative radiation therapy (3DCRT) special debate: Systemic radiotherapy using targeted isotopes is the best hope for advancing curative radiation therapy
von: Bridget F. Koontz, et al.
Veröffentlicht: (2024)
von: Bridget F. Koontz, et al.
Veröffentlicht: (2024)
Enhancing inguinal tumor treatment outcomes with a customized 3D‐printed bolus
von: Xing Li, et al.
Veröffentlicht: (2025)
von: Xing Li, et al.
Veröffentlicht: (2025)
Intra‐ and inter‐fractional variations of tumors with fiducial markers measured using respiratory‐correlated computed tomography images for respiratory gated lung stereotactic body radiation therapy
von: Yuki Manabe, et al.
Veröffentlicht: (2024)
von: Yuki Manabe, et al.
Veröffentlicht: (2024)
Feasibility study of skin dosimetry with TLD sheets for measuring the effect of 3D printed bolus in radiotherapy
von: Yuya Miyasaka, et al.
Veröffentlicht: (2025)
von: Yuya Miyasaka, et al.
Veröffentlicht: (2025)
Evaluating the Ethos automated planning system for spatially fractionated radiotherapy
von: A Aziz Sait, et al.
Veröffentlicht: (2025)
von: A Aziz Sait, et al.
Veröffentlicht: (2025)
Validation of dose‐volume calculation accuracy for intracranial stereotactic radiosurgery with volumetric‐modulated arc therapy using analytical and clinical treatment plans
von: Ioanna Grammatikou, et al.
Veröffentlicht: (2025)
von: Ioanna Grammatikou, et al.
Veröffentlicht: (2025)
Monte Carlo simulations of geometric deformation of Harrison–Anderson–Mick applicators used in intraoperative radiation therapy
von: Benjamin Insley, et al.
Veröffentlicht: (2025)
von: Benjamin Insley, et al.
Veröffentlicht: (2025)
The feasibility of CT simulation‐free adaptive radiation therapy
von: R. Lee MacDonald, et al.
Veröffentlicht: (2024)
von: R. Lee MacDonald, et al.
Veröffentlicht: (2024)
A review on radiochromic film dosimetry in radiation therapy
von: Arash Darafsheh, et al.
Veröffentlicht: (2025)
von: Arash Darafsheh, et al.
Veröffentlicht: (2025)
Commissioning and clinical implementation of Monaco treatment planning system on a compact pencil beam scanning proton therapy system
von: Xiangkun Xu, et al.
Veröffentlicht: (2026)
von: Xiangkun Xu, et al.
Veröffentlicht: (2026)
Geometric characterization of an electromagnetic surface tracking system in a radiation therapy environment
von: Mumtaz Hussain Soomro, et al.
Veröffentlicht: (2025)
von: Mumtaz Hussain Soomro, et al.
Veröffentlicht: (2025)
Monte Carlo modeling of radiation dose from radiation therapy with superficial x‐rays
von: Reham Barghash, et al.
Veröffentlicht: (2025)
von: Reham Barghash, et al.
Veröffentlicht: (2025)
MU variability in CBCT‐guided online adaptive radiation therapy
von: Sean Tanny, et al.
Veröffentlicht: (2024)
von: Sean Tanny, et al.
Veröffentlicht: (2024)
Enhancing patient‐specific quality assurance in MR‐guided radiation therapy: A fluence‐based method using log files
von: Kai Yuan, et al.
Veröffentlicht: (2025)
von: Kai Yuan, et al.
Veröffentlicht: (2025)
Patient‐specific adaptive planning margin for whole bladder radiation therapy
von: Zhexuan Zhang, et al.
Veröffentlicht: (2024)
von: Zhexuan Zhang, et al.
Veröffentlicht: (2024)
Adaptive‐driven CT simulation‐free multi‐fraction SBRT radiotherapy: Initial clinical experience
von: V. N. Malkov, et al.
Veröffentlicht: (2025)
von: V. N. Malkov, et al.
Veröffentlicht: (2025)
Comparative evaluation of image‐guided radiation therapy (IGRT)‐based dose calculation accuracy using cone‐beam, megavoltage, and kilovoltage CT modalities
von: Sirawit Saobai, et al.
Veröffentlicht: (2025)
von: Sirawit Saobai, et al.
Veröffentlicht: (2025)
Patient‐specific quality assurance for extremely small field sizes using 3D in vivo dosimetry in fractionated stereotactic radiosurgery for brain metastases
von: Kenichi Jumonji, et al.
Veröffentlicht: (2025)
von: Kenichi Jumonji, et al.
Veröffentlicht: (2025)
Demonstration of an enhanced dosing pattern for debulking large and bulky unresectable tumors via differential hole‐size spatially fractionated radiotherapy
von: Joshua Misa, et al.
Veröffentlicht: (2025)
von: Joshua Misa, et al.
Veröffentlicht: (2025)
Digital twin creation of a proton therapy treatment environment with hybrid LiDAR and RGB 3D camera
von: Jingjing M. Dougherty, et al.
Veröffentlicht: (2025)
von: Jingjing M. Dougherty, et al.
Veröffentlicht: (2025)
Verification of surface‐guided radiation therapy (SGRT) alignment for proton breast and chest wall patients by comparison to CT‐on‐rails and kV‐2D alignment
von: Hui Zhao, et al.
Veröffentlicht: (2024)
von: Hui Zhao, et al.
Veröffentlicht: (2024)
From 2D to 3D gamma passing rate tolerance and action limits for patient‐specific quality assurance in volumetric‐modulated arc therapy
von: Christos Zarros, et al.
Veröffentlicht: (2025)
von: Christos Zarros, et al.
Veröffentlicht: (2025)
Evaluation of a novel quantitative multiparametric MR sequence for radiation therapy treatment response assessment
von: Yuhao Yan, et al.
Veröffentlicht: (2025)
von: Yuhao Yan, et al.
Veröffentlicht: (2025)
Initial three‐ and half‐year machine performance assessment of a superficial radiation therapy unit
von: Yongsook C. Lee, et al.
Veröffentlicht: (2025)
von: Yongsook C. Lee, et al.
Veröffentlicht: (2025)
Explore the feasibility of using spot‐scanning proton arc therapy for a synchrotron accelerator‐based proton therapy system – A simulation study
von: Xiaoda Cong, et al.
Veröffentlicht: (2024)
von: Xiaoda Cong, et al.
Veröffentlicht: (2024)
Enhancement of dose distribution using tissue compensators in boron neutron capture therapy
von: Akinori Sasaki, et al.
Veröffentlicht: (2025)
von: Akinori Sasaki, et al.
Veröffentlicht: (2025)
A feasibility study of sexual organ‐dose sparing volumetric modulated arc therapy in female low rectal cancer patients treated with three‐dimensional conformal radiation therapy
von: Margaret H. Downes, et al.
Veröffentlicht: (2025)
von: Margaret H. Downes, et al.
Veröffentlicht: (2025)
Quantitative evaluation of the effect of anatomical changes on the results of in vivo dosimetry during radiation therapy in the thoracic region
von: Kaname Tanaka, et al.
Veröffentlicht: (2026)
von: Kaname Tanaka, et al.
Veröffentlicht: (2026)
Refining imaging parameters for dual‐energy cone‐beam computed tomography in image‐guided radiation therapy
von: Hyejoo Kang, et al.
Veröffentlicht: (2026)
von: Hyejoo Kang, et al.
Veröffentlicht: (2026)
Total body irradiation (TBI) combining volumetric modulated arc therapy (VMAT) for thorax at standard source axis distance (SAD) with intensity modulated radiation therapy (IMRT) at extended SAD
von: Marc Delaperrière, et al.
Veröffentlicht: (2026)
von: Marc Delaperrière, et al.
Veröffentlicht: (2026)
High spatial resolution dosimetry for radiation oncology with “MagicPlates,” a new 976‐pixel monolithic silicon detector
von: Ilia Filipev, et al.
Veröffentlicht: (2025)
von: Ilia Filipev, et al.
Veröffentlicht: (2025)
Ähnliche Einträge
-
Dosimetric characterization for GRID collimator‐based spatially fractionated radiation therapy: Dosimetric parameter acquisition and machine interchangeability investigation
von: Zhengzheng Xu, et al.
Veröffentlicht: (2024) -
Dosimetric impact of intrafraction patient motion on MLC‐based 3D‐conformal spatially fractionated radiation therapy treatment of large and bulky tumors
von: Josh Misa, et al.
Veröffentlicht: (2024) -
Development of a 3D‐printed phantom for total skin electron therapy dose assessment
von: Andrew Lee, et al.
Veröffentlicht: (2024) -
Technical note: A comparison of in‐house 3D‐printed and commercially available patient‐specific skin collimators for use with electron beam therapy
von: Steven M. Herchko, et al.
Veröffentlicht: (2024) -
Comprehensive clinical implementation, workflow, and FMEA of bespoke silicone bolus cast from 3D printed molds using open‐source resources
von: Dean Hobbis, et al.
Veröffentlicht: (2024)