Cover Image

Simultaneously enhancing the flow properties and mechanical strength of polyphenylene sulfide via in‐mold ultrasonic‐assisted injection molding

Fuente: Wiley Open Access

Saved in:

Bibliographic Details
Main Authors:	Mingcheng Bi, Junfeng Liu, Qiong Wu, Fei Jiang, Pengcheng Nie, Zhongbin Xu, Xing Huang
Format:	Artículo Open Access
Published:	Wiley 2024
Subjects:	Journal of Applied Polymer Science
Online Access:	Acceder al recurso
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Experimental and numerical investigations on formation mechanisms of hollow structures in overflow water‐assisted injection‐molded parts of short‐glass‐fiber‐reinforced polypropylene
by: Qingsong Jiang, et al.
Published: (2024)

Effects of photodegradation performance with PLA‐containing samples on double injection molding
by: Jiquan Li, et al.
Published: (2024)

Effect of polyphenylene sulfide sulfone sizing agent on interfacial, thermal, and mechanical properties of carbon fiber
by: Yifan Zhuang, et al.
Published: (2024)

Optimizing the injection molding process for thermally and electrically conductive, carbon fiber and carbon nanotube‐reinforced poly(lactic acid) hybrid composites with enhanced mechanical properties
by: Ábris Dávid Virág, et al.
Published: (2024)

Fabrication of lightweight polyethersulfone foams with enhanced surface quality and high specific flexural properties using micro‐opening microcellular injection molding
by: Yiming Zhang, et al.
Published: (2024)

3D printing cross‐scale mold for manufacturing micromixers
by: Kai Li, et al.
Published: (2024)

Effect of microstructure tuning by rapid heat cycle molding on the photodegradation behavior of isotactic polypropylene
by: Jiquan Li, et al.
Published: (2024)

Boron‐polymer composites engineered for compression molding, foaming, and additive manufacturing
by: John R. Stockdale, et al.
Published: (2024)

In‐mold rheology and automated process control for injection molding of recycled polypropylene
by: Joshua Krantz, et al.
Published: (2024)

Injection molding of biodegradable polyester blends filled with mineral and sustainable fillers: Performance evaluation
by: Dayna Colleen McNeill, et al.
Published: (2024)

3D printing molding of UV‐curing liquid silicone rubber by UV follow curing
by: Bing Liu, et al.
Published: (2024)

Effect of inorganic nanoparticles on polypropylene in‐mold decoration and microcellular foaming injection molding composites
by: Jialong Zhao, et al.
Published: (2024)

Effects of injection molding parameters and welding sequence on the interfacial strength of glass fiber‐reinforced polypropylene
by: Jianhua Tang, et al.
Published: (2025)

Comparative evaluation of vat photopolymerization and steel tool molds on the performance of injection molded and overmolded tensile specimens
by: Xun Jian, et al.
Published: (2024)

Improved thermomechanical and rheological properties of polypropylene composites with thermomechanical pulp for injection molding
by: Adel Jalaee, et al.
Published: (2024)

Processing recycled silicone powder in liquid silicone rubber injection molding and its influence on mechanical properties
by: Dennis Mayer, et al.
Published: (2024)

Investigation of microstructural and mechanical properties of weld lines in injection‐molded short glass fiber‐reinforced polyamide 6
by: Majid Mokarizadehhaghighishirazi, et al.
Published: (2024)

Investigation of the effects of walnut shell wood particles on the mechanical properties of injection molded wood‐ polyethylene‐polycarbonate composites
by: Rasool R. K. Al‐Arkawazi, et al.
Published: (2025)

The influence of sizing treatment on the mechanical and morphological properties of carbon fiber reinforced polyphenylene sulfide composites
by: Junjie Liu, et al.
Published: (2024)

Mechanical and crystallization properties of hot runner injection molded virgin and recycled polypropylene
by: Nicholas Bowen, et al.
Published: (2024)

Effect of processing parameter changes on mechanical properties during injection molding: Amorphous versus semi‐crystalline materials
by: Kaiyu Cai, et al.
Published: (2024)

High‐temperature resistant copolymer oil well cement retarder: Synthesis, assessment of performance, and mechanism of retardation
by: Jifa Bian, et al.
Published: (2024)

Comparison of cell morphology and mechanical properties of wheat straw powder/HDPE parts molded by supercritical fluid foamed injection with and without gas counter pressure technology
by: Xi‐long Jiang, et al.
Published: (2024)

Enhancing fracture toughness of carbon fiber/epoxy composites using polyphenylene ether as a modifier
by: Naveen Veeramani, et al.
Published: (2024)

Bioinspired chitin/gelatin composites with enhanced mechanical property
by: Chong Wang, et al.
Published: (2024)

Effect of covalently functionalized Indian bentonite clay on thermal, mechanical strength and morphology structure of extrusion/injection‐molded nylon 6 composites
by: Kumaresan Shanmugam, et al.
Published: (2024)

The effect of aging on the mechanical properties of bulk molding compound with different fiber lengths
by: Tsung‐Han Hsieh, et al.
Published: (2024)

Effect of polyphenylene sulfide content on the properties of injection molding bonded NdFeB magnets
by: Y. Yang, et al.
Published: (2024)

Study on the processes and warpage of double‐injection‐molded parts containing PP recycled materials
by: Jiquan Li, et al.
Published: (2024)

Investigation of polymer injection molding using calcareous waste concrete powder and polyethylene
by: Yasuyuki Kanda, et al.
Published: (2024)

Study on the mechanical properties of hydrogels enhanced by acryloyl‐functionalized polyethyleneimine cross‐links
by: Hongming Lv, et al.
Published: (2024)

Recyclability of take‐back glass fiber‐reinforced blends of polyphenylene oxide with high‐impact polystyrene for high‐performance engineering applications
by: Kyriaki Gkaliou, et al.
Published: (2024)

Synergistic effects of in situ fibrillated polytetrafluoroethylene and polystyrene–butadiene block on the microcellular foaming behaviors of polyphenylene oxide modified by high‐impact polystyrene
by: Meiqi Yan, et al.
Published: (2024)

Effects of molding curing temperature and pressure on the mechanical properties of carbon fiber reinforced plastics
by: Jinguang Zhang, et al.
Published: (2025)

Annular expansion for enhanced orientation and mechanical properties of extruded amorphous PPESK/PES pipes
by: Xiaotong Pan, et al.
Published: (2024)

Research on the quality of long glass fiber‐reinforced polypropylene pipes formed via fluid‐assisted co‐injection molding
by: Qingquan Zhou, et al.
Published: (2024)

Effect of recycling and bio‐filler addition on the mechanical, thermal, and morphological behavior of the injection molded flax/ PLA green composite
by: Mitali Debnath, et al.
Published: (2024)

Acetanilide‐loaded injectable hydrogels with enhanced bioactivity and biocompatibility for potential treatment of periodontitis
by: Saira Sajjad, et al.
Published: (2024)

Algae infused enhancement of PBAT stiffness: Investigating the influence of algae content on mechanical and thermal properties
by: John Letwaba, et al.
Published: (2024)

Investigation of anisotropic shrinkage in liquid silicone rubber injection molding: Process variables
by: Matthew R. Bont, et al.
Published: (2024)