Buchumschlag

Research on Pultrusion Molding of Carbon Fiber Composites Under Vacuum High and Low Temperature Environments

Fuente: Wiley Open Access

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Yonggen Sun, Changxin Du, Cunyi Wang, Peng Li, YeLong Lin, Jiayong Yan, Jinqi Pan, Yun Tian
Format:	Artículo Open Access
Veröffentlicht:	Wiley 2026
Schlagworte:	Journal of Applied Polymer Science
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

Effect of Blended Polyphenylene Sulfide on Spinnability of Mesophase Pitch and the Properties of Carbon Fiber
von: Ruifu Gong, et al.
Veröffentlicht: (2025)

Effects of Temperature and Composition on the Transport Properties of Binary Electrolyte Components Into EPDM and HNBR Vulcanizates With Thermodynamic Analysis
von: Fangzheng Mu, et al.
Veröffentlicht: (2025)

Investigation on Thermal and Structural Integrity of Aramid Fiber‐PEKK Polymer/XLPE Foam Sandwich Composites Under Elevated Temperature and Cryogenic Environments
von: Kush Kumar, et al.
Veröffentlicht: (2025)

Carbon Fiber and Glass Fiber Reinforced Semi‐Aromatic Polyamide Composites With Enhanced Mechanical, Electrical, and Flame‐Retardancy Properties
von: Shuying Ye, et al.
Veröffentlicht: (2025)

Mixing Element Structure in Direct Fiber Feeding Injection Molding: Correlating Microstructure and Fiber Morphology With Length Retention and Mechanical Properties in GF / PP Composites
von: Qiang Gong, et al.
Veröffentlicht: (2026)

Continuous Glass Fiber Reinforced Polyamide 6 Composite Melt Impregnation Pultrusion Molding: Effects of Processing Parameters and Die Geometry
von: Chenchao Fu, et al.
Veröffentlicht: (2025)

Segmentation and Modeling of Injection Molding Production Processes Driven by Input Electrical Signals
von: Baisong Pan, et al.
Veröffentlicht: (2025)

Probing the Effect of Prepolymerization on the Structure and Properties of Phthalonitrile Resin/Basalt Fiber Composites
von: Shuai Zhang, et al.
Veröffentlicht: (2025)

Investigation on Foamed Polypropylene/Nano‐Talc/Ethylene Propylene Diene Monomer Composites in a Combined In‐Mold Decoration and Microcellular Injection Molding Process
von: Kui Yan, et al.
Veröffentlicht: (2024)

High‐Temperature Tribological Performance of Short Bamboo Fiber‐Reinforced Polymer Composite
von: Geng Hou, et al.
Veröffentlicht: (2025)

Wear and Mechanical Behavior of Wood Fiber/ PLA Composites in Short‐Term Hydrothermal Environment
von: Chunjin Li, et al.
Veröffentlicht: (2025)

Effect of Carbon Fibers Coated With Nanosized Hydroxyapatite on the Strength and Biocompatibility of Polymer Composites
von: Sara Targońska, et al.
Veröffentlicht: (2025)

Influence and Mechanism of Mold Thermal Conductivity on the Properties of Polyurethane Sponges
von: Yu Ren, et al.
Veröffentlicht: (2025)

Design of a Double Rotor Extruder and Its Effect on Fiber Retention and Mechanical Properties of Glass Fiber‐Reinforced Polypropylene Composites
von: Xiaochun Yin, et al.
Veröffentlicht: (2025)

Process Optimization and Performance Investigation of Short Carbon Fiber Reinforced Nylon 6 Composites
von: Yukun Jia, et al.
Veröffentlicht: (2026)

Vulcanized Eucommia Rubber‐Tung Oil Composite Modified Epoxy Resin: Achieving Enhanced Flexibility and Corrosion Resistance
von: Dengyun Ye, et al.
Veröffentlicht: (2026)

Repeated Low‐Velocity Impact Response of Graphene Nanoplatelet‐Reinforced Basalt Fiber Composites
von: Farzin Azimpour‐Shishevan, et al.
Veröffentlicht: (2026)

SCF/S 8 /PE Rotational Molding Composites With Creep Resistance and Environmental Stress Cracking Property
von: Shuai Chen, et al.
Veröffentlicht: (2026)

Study on Toughening of In Situ Polymerized Poly(Methyl Methacrylate) Resin for Liquid Composite Molding Technology
von: Kang Zhu, et al.
Veröffentlicht: (2025)

Eco‐Friendly Waterborne‐Hydrolyzed‐Silk‐Fibroin Sizing for Enhanced Interfacial Properties in High‐Modulus Continuous Carbon Fiber/Epoxy Composite
von: Xusheng Chao, et al.
Veröffentlicht: (2025)

A Novel Phosphorus Containing Flame‐Retardant Benzocyclobutene Composite Materials With Low Dielectric Constant
von: Chao Guo, et al.
Veröffentlicht: (2025)

Optimizing Parameters for Microcellular Foaming and In‐Mold Decoration of Talc/ PP Composites Using PSOBP Neural Network
von: Wei Guo, et al.
Veröffentlicht: (2025)

Construction of Fluorinated Nanolayer on Nickel‐Coated Carbon Fiber and Its Enhancement in Tribological Performance of Polytetrafluoroethylene Composites
von: Xuemei Miao, et al.
Veröffentlicht: (2025)

Interfacial Improvement of Carbon Fiber/Poly (Ether Ether Ketone) Composites by Coating Water‐Based Sulfonated Poly (Ether Ether Ketone) and Carbon Nanotube Composite Sizing Agent
von: Qing Zhang, et al.
Veröffentlicht: (2025)

Synergistic Effects of Surface‐Modified Glass Fiber on Polylactic Acid Matrix Composites Reinforcement and Toughening
von: Qing Tan, et al.
Veröffentlicht: (2025)

Effects of Printing Parameters on the Ratcheting Fatigue Behavior of 3D Printed Carbon‐Fiber Reinforced ABS Composite
von: Pratyush Nayak, et al.
Veröffentlicht: (2026)

Effect of Silane‐Modified Basalt Fiber on the Properties of Basalt Fiber/Natural Rubber Composites
von: Zeming Zhang, et al.
Veröffentlicht: (2025)

Interfacial Engineering of Highly‐Filled Bismuth/ PVA Fibers for Environment‐Friendly γ‐Rays Shielding Fabrics
von: Shi‐Hao Liu, et al.
Veröffentlicht: (2026)

Effect of Various Diamines on the Mechanical, Thermal, and High‐Frequency Dielectric Properties of Polyimide and Their Composites With Functionalized Hollow Silica Fiber
von: Yu‐Min Ye, et al.
Veröffentlicht: (2025)

Effect of Multi‐Walled Carbon Nanotubes on the Properties of EPDM Composites Reinforced With Polyimide Short Fibers Prepared by Solution Wet Mixing
von: Baochang Dai, et al.
Veröffentlicht: (2025)

Fluorinated Modification of Carbon Fibers and Its Synergistic Enhancement With Ag‐Coated Cu Hybrid Microparticles in Polytetrafluoroethylene Composites for Lubricating Bearings
von: Wenwu Liu, et al.
Veröffentlicht: (2025)

Improved Flame Retardancy and Tensile Property of Aramid Fiber‐Reinforced Aluminum Hydroxide/Zinc Borate/Low‐Density Polyethylene Composites
von: Xuxu Yu, et al.
Veröffentlicht: (2025)

Simulation and Experimental Study of the Flow Mechanism of Injection‐Molded Materials for Optical Non‐Spherical Cylindrical Lens
von: Tianfeng Zhou, et al.
Veröffentlicht: (2025)

Multi‐Scale Synergy in PTFE /Glass Fiber Composites: Mechanical and Tribological Enhancement Achieved by Wet Granulation
von: Kunpeng Cai, et al.
Veröffentlicht: (2026)

Thermal Stabilization of Chitosan Yarn for Carbon Fiber Production
von: Irina Kuznik, et al.
Veröffentlicht: (2026)

Polyethyleneimine–Polydopamine Coating and NH 2 /COOH‐Carbon Nanotubes Synergistically Reinforced Continuous Aramid Fiber/Unsaturated Polyester Resin Composites
von: Kexin Chen, et al.
Veröffentlicht: (2025)

Role of Hydrolysis on the Biodegradation of PLA Fibers Under Industrial Composting Conditions
von: Jose Alejandro Fernandez, et al.
Veröffentlicht: (2026)

Effects of Molecular Structure Design on the Thermal, Mechanical, and Dielectric Properties of Polyarylene Ether Nitrile for Low‐Dielectric Applications
von: Jinqi Wu, et al.
Veröffentlicht: (2025)

Flexural Behavior of Multi‐Cavity Composite Beams of Multi‐Axial Fiber Reinforced Pultrusion Pipes
von: Yakang Wu, et al.
Veröffentlicht: (2025)

Evolution of the Polycyclic Aromatic Structure in Mesophase Pitch Fibers During Pre‐Oxidation and Its Effect on the Tensile Strength of Carbon Fibers
von: Ke Zhang, et al.
Veröffentlicht: (2026)