Buchumschlag

Recovery of Graphite Produced by Pyrolysis of Li‐Ion Batteries During Cathode Recycling

Fuente: Wiley Open Access

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Cheng Jie Chng, Yusuke Abe, Mahmudul Kabir, Tatsuya Yodose, Ryoei Watanabe, Seiji Kumagai
Format:	Artículo Open Access
Veröffentlicht:	Wiley 2026
Schlagworte:	ChemElectroChem
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

Advancements in Surface Modification Techniques by Metal Fluoride Coating for Enhanced Electrochemical Performance of Cathode Active Materials in Li‐Ion Batteries
von: Merve Gençtürk, et al.
Veröffentlicht: (2025)

Core‐Shell Amorphous FePO4 as Cathode Material for Lithium‐Ion and Sodium‐Ion Batteries
von: Peng Tang, et al.
Veröffentlicht: (2024)

Long‐Life Pillar[5]quinone Cathode for Aqueous Zinc‐Ion Batteries
von: Serkan Yeşilot, et al.
Veröffentlicht: (2024)

Screen‐Printed Composite LiFePO4‐LLZO Cathodes Towards Solid‐State Li‐ion Batteries
von: Palanivel Molaiyan, et al.
Veröffentlicht: (2024)

Impact of Li Ion Transport Properties on Reversibility of Li Metal Electrode in Glyme‐Based Electrolytes
von: Junichi Murai, et al.
Veröffentlicht: (2024)

Multi‐Electron Transfer Organic Cathode for High‐Performance Aqueous Zinc‐Ion Batteries
von: Jiaoyi Ning
Veröffentlicht: (2024)

LiCr x Fe y Mn 2− x − y − z Ti z O 4 Spinels as Cathodes for Li‐Ion Batteries: A Multidoping Approach to Suppress Jahn–Teller Distortion
von: Daniele Callegari, et al.
Veröffentlicht: (2026)

Thermal Annealing of Graphite for Enhanced Electrochemical Performance in All‐Solid‐State Lithium Batteries
von: Zhihan Liu, et al.
Veröffentlicht: (2026)

Critical Review of Optimal Control Methods for Li‐Ion Batteries in Electric Vehicles
von: Yeonsoo Kim
Veröffentlicht: (2024)

Microwave Engineering of Manganese‐Rich Layered‐Spinel Cathode Materials for Enhanced Lithium‐Ion Battery Performance
von: Tebogo Tsekeli, et al.
Veröffentlicht: (2025)

One‐Step Synthesized Al/Mg Codoped LiNi 0.9 Mn 0.1 O 2 Cathodes with Enhanced Structural and Electrochemical Stability for Lithium‐Ion Batteries
von: Lang Wen, et al.
Veröffentlicht: (2025)

Modification Mechanisms and Synergistic Effects of Nb/Al Codoping in High‐Nickel Cathode Materials for Lithium‐Ion Batteries
von: Zailun Ma, et al.
Veröffentlicht: (2025)

Decoupling of O3‐Layered Cathode Stability from System‐Driven Thermal Runaway in Sodium‐Ion Batteries
von: Yan Li, et al.
Veröffentlicht: (2025)

Understanding Charge Storage Mechanisms in Flexible Nanocellulose/Graphite Battery Electrodes
von: Evangelia Founta, et al.
Veröffentlicht: (2025)

Spruce Needles‐Derived N‐Doped Carbon as an Excellent Anode Material for Li‐Ion Batteries
von: Ranjith Reddy Patthi, et al.
Veröffentlicht: (2026)

Fast Sodium Ion Tracking at the Battery Electrode Interface During Cycling in Concentrated Aqueous Electrolytes
von: Kei Shibuya, et al.
Veröffentlicht: (2026)

Insights into the High Catalytic Activity of Li‐Ion Battery Waste toward Oxygen Reduction to Hydrogen Peroxide
von: Magdalena Warczak, et al.
Veröffentlicht: (2024)

Front Cover: LiCr x Fe y Mn 2− x − y − z Ti z O 4 Spinels as Cathodes for Li‐Ion Batteries: A Multidoping Approach to Suppress Jahn–Teller Distortion (ChemElectroChem 7/2026)
von: Daniele Callegari, et al.
Veröffentlicht: (2026)

Application of Hydrogen‐Bonded Organic Frameworks with Redox‐Active Imide Units as Cathode‐Active Materials in Lithium‐ and Sodium‐Ion Batteries
von: Katsuhiro Wakamatsu, et al.
Veröffentlicht: (2024)

A Uniform Conductive Carbon Coating of Nitrogen‐Doped Carbon Improves the Electrochemical Performance of LiMn0.7Fe0.3PO4 Cathode Material for Lithium‐ion Batteries
von: Hesen Xiong, et al.
Veröffentlicht: (2024)

Influence of Surface Area Calculation Methods on the Interpretation of Lithium‐Ion Diffusion Coefficient in Graphite Electrodes
von: Alessandro Gregucci, et al.
Veröffentlicht: (2026)

Recycling of Spent Cathode Carbon from Aluminum Electrolysis: Detoxification Approaches, Resource Utilization, and Environmental Perspectives
von: Narasimharao Kitchamsetti, et al.
Veröffentlicht: (2025)

Emerging Battery Systems with Metal as Active Cathode Material
von: Kaiming Xue, et al.
Veröffentlicht: (2024)

Gas Evolution in Li‐Ion Rechargeable Batteries: A Review on Operando Sensing Technologies, Gassing Mechanisms, and Emerging Trends
von: Tianye Zheng, et al.
Veröffentlicht: (2024)

Dual‐Template‐Assisted Pyrolysis Strategy to Construct Iron‐Nitrogen Co‐Doped Porous Carbon Catalysts for High‐Performance Zn–Air Batteries
von: Hai Song, et al.
Veröffentlicht: (2025)

Cost‐Effective Solutions for Lithium‐Ion Battery Manufacturing: Comparative Analysis of Olefine and Rubber‐Based Alternative Binders for High‐Energy Ni‐Rich NCM Cathodes
von: Susan Montes, et al.
Veröffentlicht: (2024)

Stability and Performance of 3d Transition Metal Carbo‐Sulfides: A Density Functional Theory Exploration for Li‐Ion Battery Anodes
von: Linguo Lu, et al.
Veröffentlicht: (2025)

In‐Vitro Electrochemical Prelithiation: A Key Performance‐Boosting Strategy for Carbon Nanotube‐Containing Silicon‐Based Negative Electrodes in Li‐Ion Batteries
von: Leyla Ünal, et al.
Veröffentlicht: (2024)

Simultaneous Scanning Ion Conductance and Electrochemical Microscopy in Lithium‐Ion Battery Research
von: Johannes Eidenschink, et al.
Veröffentlicht: (2024)

Simultaneous Scanning Ion Conductance and Electrochemical Microscopy in Lithium‐Ion Battery Research
von: Johannes Eidenschink, et al.
Veröffentlicht: (2024)

Front Cover: Insights into the High Catalytic Activity of Li‐Ion Battery Waste toward Oxygen Reduction to Hydrogen Peroxide (ChemElectroChem 15/2024)
von: Magdalena Warczak, et al.
Veröffentlicht: (2024)

A Perspective on the Requirements of Ni‐rich Cathode Surface Modifications for Application in Lithium‐ion Batteries and All‐Solid‐State Lithium‐ion Batteries
von: Jae Hong Choi, et al.
Veröffentlicht: (2024)

Challenges and Advances in Wide‐Temperature Electrolytes for Lithium‐Ion Batteries
von: Zixin Hong, et al.
Veröffentlicht: (2024)

Materials for 3D Printed Metal and Metal‐Ion Batteries
von: Tomás García Rodríguez, et al.
Veröffentlicht: (2024)

Why and How Poly(acrylic Acid) Stabilizes and Structures Si/C Supraparticles for Li‐Ion Batteries: Unraveling PAA–Si/C Interactions From Dispersion to Electrode Integration
von: Adil Amin, et al.
Veröffentlicht: (2026)

Recent Advances in Non‐Carbon Dense Sulfur Cathodes for Lithium–Sulfur Battery with High Energy Density
von: Viet Phuong Nguyen, et al.
Veröffentlicht: (2024)

Synthesis of MoS₂/Graphene Hetero‐Film Photocatalyst and Li‐Oxygen Battery Application
von: Ali Can Çelt, et al.
Veröffentlicht: (2024)

Cover Feature: Cost‐Effective Solutions for Lithium‐Ion Battery Manufacturing: Comparative Analysis of Olefine and Rubber‐Based Alternative Binders for High‐Energy Ni‐Rich NCM Cathodes (ChemElectroChem 21/2024)
von: Susan Montes, et al.
Veröffentlicht: (2024)

NaDFOB and FEC as Electrolyte Additives Enabling Improved Cyclability of Sodium Metal Batteries and Sodium Ion Batteries
von: Zhengqi Wang, et al.
Veröffentlicht: (2025)

Nickel–Cobalt–Manganese‐Based Cathodes for Hybrid Battery‐Supercapacitor Devices: Electrochemical Performance, Mechanisms, and Modification Strategies
von: Ziqi Chen, et al.
Veröffentlicht: (2025)