Cover Image

Commercially Viable Manufacturing of High Entropy Carbide Feedstocks

Fuente: Wiley Open Access

Saved in:

Bibliographic Details
Main Authors:	Kevin Kaufmann, James Vecchio, Kenneth S. Vecchio
Format:	Artículo Open Access
Published:	Wiley 2025
Subjects:	International Journal of Ceramic Engineering & Science
Online Access:	Acceder al recurso
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Characterization of High Strength Concrete‐Like Glass Ceramics Developed Using Borosilicate Waste Glass and Silicon Carbide
by: Bidemi Omowumi Elesho, et al.
Published: (2025)

ZnO‐Functionalized Silicon Carbide Ceramic Membranes for Removing Impurities From Biodiesel
by: Arthur Santos Romero, et al.
Published: (2026)

High‐performance alumina composite ceramics with brick‐and‐mortar structure derived from microsphere
by: Yedong Rong, et al.
Published: (2025)

Ablation Properties of HfC–SiC–WC Ultra‐High Temperature Ceramics Produced by Pressureless Sintering
by: C. Doolittle, et al.
Published: (2026)

Physical Properties of the K0.5Na0.5NbO3 Compound Doped With Li, La, and Ti in Concentration Lower Than 1.3 mol%
by: C. Montero‐Tavera, et al.
Published: (2025)

Interparticle Forces Behind Plasticity of Ceramic Pastes: A Literature Review
by: Kimiyasu Sato, et al.
Published: (2025)

Recent Joining Materials Options for Ceramic Matrix Composites
by: Valentina Casalegno, et al.
Published: (2025)

Additive manufacturing of textured barium titanate ceramics via shear force‐induced platelet alignment
by: Alexis Lopez, et al.
Published: (2025)

Issue Information
Published: (2025)

The Effect of Deposition Process Parameters on the Microstructure and Mechanical Properties of Nanostructured Thermal Barrier Coatings
by: Shahnaz Bashir Bhat, et al.
Published: (2025)

Rapid and low‐temperature synthesis of MoAlB MAB phase by using stress‐induced Al‐particles
by: Maharshi Dey, et al.
Published: (2025)

Issue Information
Published: (2025)

Nanostructured Thermal Barrier Coatings via Magnetron Sputtering: A Review of Enhanced Performance and Durability
by: Syed Faizan Altaf, et al.
Published: (2025)

Issue Information
Published: (2025)

Effect of substitution and processing on the morphology and dielectric properties of Pr2/3Cu3Ti4O12 (PCTO) ceramic
by: Bradley Arnold, et al.
Published: (2025)

Calculation model by Voronoi network and verification of zinc oxide varistor considering conduction mechanism
by: Xiao Lei, et al.
Published: (2025)

Structural, Optical, and Electrical Investigations of MgO Nanostructure Under the Pressure Effect
by: Y. Al‐Douri, et al.
Published: (2025)

Degradation of Abandonment Cement Plugs Under Prolonged Exposure to Completion Fluids: A Multi‐Technique Evaluation
by: Rafael A. Ventura, et al.
Published: (2025)

Effect of potassium‐waterglass composition on strength development and leaching behavior of geopolymers in different curing conditions
by: Umberto C. C. S. Siciliano, et al.
Published: (2025)

Effects of the Concentration of Inorganic Binders and Optical Absorbers on the Phase Formation and Microstructure of Flash‐Lamp‐Annealed Chemically Bonded Phosphate Ceramic Composites
by: Eren Ozmen, et al.
Published: (2025)

Innovative Application of Traditional Paper Marbling Technique in the Fabrication of Ceramic Glazes
by: Zeinab Abedian Jelodar, et al.
Published: (2025)

Valorization of Mine Tailings for Sustainable Geopolymer Production
by: Pozhhan Mokhtari, et al.
Published: (2025)

The Influence of Ni 2 O 3 Doping Concentration on the Alternating Current Aging Characteristics of ZnO Varistor
by: Lei Wang, et al.
Published: (2025)

Issue Information
Published: (2025)

Strategies for Minimizing Defects in Ceramic 3D Printed Parts: A Brief Review
by: Shahram Mahboubizadeh, et al.
Published: (2025)

The Use of Ornamental Stone Waste (OSW) as Raw Material for Porcelain Ceramic Tiles Production
by: Pablo Rosa dos Santos, et al.
Published: (2025)

Red mud incorporated clay roof tiles as visible light‐active photocatalysts for building applications
by: Erdem Tevfik Özdemir, et al.
Published: (2025)

Improvement of mechanical properties of biomimetic‐layered Si3N4 ceramics with TiN as the interface layer
by: Xinghua Shen, et al.
Published: (2025)

Finite Element Analysis of R‐Curve Behavior in Ceramics Using the Damage Model Based on the Cohesive‐Zone Relationship
by: Mostafizur Rahman, et al.
Published: (2025)

Influence of Phosphates on Pore Solution pH in Alkali‐Activated MgO‐Al 2 O 3 ‐SiO 2 ‐P 2 O 5 Cement
by: Titus Reed, et al.
Published: (2025)

Feasibility of production fired bricks based lateritic soil at very low temperature
by: Jordan Valdès Sontia Metekong, et al.
Published: (2024)

Stuck on Glass: A Review of Polymer and Polymer Nanoparticle Composite Coatings in Glass Technology
by: Shaylee M. Becerra, et al.
Published: (2026)

Effect of MnO2${\text{MnO}}_{2}$ doping on AC aging characteristics of varistor in arrester
by: Zhengzheng Fu, et al.
Published: (2024)

Issue Information
Published: (2024)

Investigating the impact of notch shapes on oxide–oxide ceramic matrix composites strength: A computational approach
by: Karthikeyan Ramachandran, et al.
Published: (2024)

The Brittle Ring Test: A Simple and Reliable Method for Evaluating the Fracture Strength of Technical Ceramics—Theoretical and Experimental Investigations
by: Achim Rübling, et al.
Published: (2026)

Bismuth Schiff base complex and its oxide nanoparticles as photocatalyst for the removal of dyes from water
by: Behrouz Shaabani, et al.
Published: (2024)

Insight to the Growth Characteristics and Crystal Morphology of α‐Hemihydrate Gypsum in Na 2 SO 4 Solution
by: Zhongyong Zhang, et al.
Published: (2026)

A DFT Assessment on the Structural, Thermodynamic, and Electrical Properties of Transition Metal‐Doped Gallium Arsenide Nanoclusters (Ga n As n , Where n = 4, 5, and 6)
by: Suhita Kar Chowdhury, et al.
Published: (2026)

Influence of Y–Bi–Co oxide doping on electrical performance of ZnO varistors based on simulation analysis
by: Zhengzheng Fu, et al.
Published: (2024)