From Nanoindentation to Microhardness to Tensile Strength: Correlation Coefficients Estimates as a Function of Microstructure in Eutectic SnBi Alloy
Fuente:
Wiley Open Access
Guardado en:
| Autores principales: | , , , , |
|---|---|
| Formato: | Artículo Open Access |
| Publicado: |
Wiley
2025
|
| Materias: | |
| Acceso en línea: | |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| _version_ | 1867018219559059457 |
|---|---|
| author | Nataliya Starostina Aja Hartman Rosemary Cole Dongmeng Li Jong W. Park |
| author_facet | Nataliya Starostina Aja Hartman Rosemary Cole Dongmeng Li Jong W. Park Nataliya Starostina Aja Hartman Rosemary Cole Dongmeng Li Jong W. Park |
| collection | Wiley Open Access |
| contents | From Nanoindentation to Microhardness to Tensile Strength: Correlation Coefficients Estimates as a Function of Microstructure in Eutectic SnBi Alloy Nataliya Starostina Aja Hartman Rosemary Cole Dongmeng Li Jong W. Park Engineering Reports ABSTRACT Determining strength to hardness correlation coefficients on nano and microscale in correspondence to microstructure and composition leads the way to inexpensive, non‐destructive ways to predict tensile strength of bulk materials, which is important for developing preventive maintenance procedures in a variety of industries. Nanohardness and microhardness tests were performed on an in‐house prepared eutectic SnBi alloy. Elemental composition and eutectic morphology were verified by scanning electron microscopy and energy dispersive spectroscopy. The linear correlation coefficient, C 1 = H IT / H v , between nanoindentation hardness and Vickers microhardness was determined based on experimental measurements. A value of C 1 > 1.25 was obtained, exceeding the expected value for polycrystalline alloys C 1 = 1.25. The Tabor factor, k = H v / σ at 8% strain, is well known to be about 3 for polycrystalline alloys. However, for the eutectic alloy, the estimated Tabor factor was consistently greater than 3. The stronger correlation in both cases suggests the presence of an unaccounted factor contributing to both C 1 and k . Comparison to coefficients estimated from data available for other alloy systems is discussed. 10.1002/eng2.70113 http://creativecommons.org/licenses/by/4.0/ |
| doi_str_mv | 10.1002/eng2.70113 |
| format | Artículo Open Access |
| id | wiley_oa_10_1002_eng2_70113 |
| institution | Wiley Open Access |
| license_str_mv | http://creativecommons.org/licenses/by/4.0/ |
| publishDate | 2025 |
| publisher | Wiley |
| record_format | wiley_oa |
| spellingShingle | From Nanoindentation to Microhardness to Tensile Strength: Correlation Coefficients Estimates as a Function of Microstructure in Eutectic SnBi Alloy Nataliya Starostina Aja Hartman Rosemary Cole Dongmeng Li Jong W. Park Engineering Reports From Nanoindentation to Microhardness to Tensile Strength: Correlation Coefficients Estimates as a Function of Microstructure in Eutectic SnBi Alloy Nataliya Starostina Aja Hartman Rosemary Cole Dongmeng Li Jong W. Park Engineering Reports ABSTRACT Determining strength to hardness correlation coefficients on nano and microscale in correspondence to microstructure and composition leads the way to inexpensive, non‐destructive ways to predict tensile strength of bulk materials, which is important for developing preventive maintenance procedures in a variety of industries. Nanohardness and microhardness tests were performed on an in‐house prepared eutectic SnBi alloy. Elemental composition and eutectic morphology were verified by scanning electron microscopy and energy dispersive spectroscopy. The linear correlation coefficient, C 1 = H IT / H v , between nanoindentation hardness and Vickers microhardness was determined based on experimental measurements. A value of C 1 > 1.25 was obtained, exceeding the expected value for polycrystalline alloys C 1 = 1.25. The Tabor factor, k = H v / σ at 8% strain, is well known to be about 3 for polycrystalline alloys. However, for the eutectic alloy, the estimated Tabor factor was consistently greater than 3. The stronger correlation in both cases suggests the presence of an unaccounted factor contributing to both C 1 and k . Comparison to coefficients estimated from data available for other alloy systems is discussed. 10.1002/eng2.70113 http://creativecommons.org/licenses/by/4.0/ |
| title | From Nanoindentation to Microhardness to Tensile Strength: Correlation Coefficients Estimates as a Function of Microstructure in Eutectic SnBi Alloy |
| topic | Engineering Reports |
| url | https://onlinelibrary.wiley.com/doi/10.1002/eng2.70113 |