:: Library Catalog

Cover Image

Saved in:

Bibliographic Details
Main Authors:	Pedram Mortazavi, Constantin Christopoulos, Oh‐Sung Kwon
Format:	Artículo Open Access
Published:	Wiley 2024
Subjects:	Earthquake Engineering & Structural Dynamics
Online Access:	https://onlinelibrary.wiley.com/doi/10.1002/eqe.4113
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Challenges and Lessons Learned From Pseudo‐Dynamic Hybrid Simulations on Ductile Steel Braced Frame Systems
by: Pedram Mortazavi, et al.
Published: (2025)

A Clustering‐Based Loading History Selection Method for the Calibration of Buckling‐Restrained Braces in Seismic Analysis
by: Hongzhou Zhang, et al.
Published: (2024)

Corrigendum to: A cantilever beam analogy for quantifying higher mode effects in multistorey buildings
by: Lydell Wiebe, et al.
Published: (2024)

Investigation on the Calibration of Numerical Models for Cast Steel Replaceable Modular Yielding Links in Steel Eccentrically Braced Frames
by: Hongzhou Zhang, et al.
Published: (2025)

Analytical Study on the Predictability of Controlled Rocking Frame and Podium Systems
by: Marawan Zaki, et al.
Published: (2025)

Friction Characterization and Mitigation in Large‐Scale 6DOF Multi‐Axial Hybrid Simulation
by: Pedram Mortazavi, et al.
Published: (2025)

Hybrid data‐driven and physics‐based simulation technique for seismic response evaluation of steel buckling‐restrained braced frames considering brace fracture
by: Ali Sadrara, et al.
Published: (2024)

Seismic design of steel moment‐resisting knee‐braced frame system by failure mode control
by: Mostafa Fathi Sepahvand, et al.
Published: (2024)

Local and global integrative retrofitting of reinforced concrete frames using in‐plane buckling steel braces
by: Devyani Tewatia, et al.
Published: (2024)

Deep learning‐based response spectrum analysis method for building structures
by: Taeyong Kim, et al.
Published: (2024)

Deep Learning‐Based Response Spectrum Analysis Method for Bridges Subjected to Bi‐Directional Ground Motions
by: Taeyong Kim, et al.
Published: (2025)

General Framework for Multi‐Degree‐of‐Freedom Stiffness Matrix Updating for Iterative Solution Algorithms in Hybrid Simulation
by: Junyan Xiao, et al.
Published: (2026)

Unified Hysteresis Modeling via Physics‐Based Deep Learning and Data Augmentation
by: Jaehwan Jeon, et al.
Published: (2025)

Modal characterization of a three‐story buckling‐restrained braced frame steel building by non‐destructive field testing
by: Michael Morano, et al.
Published: (2024)

Seismic Fragility Analysis of Containment Structures in Nuclear Power Plants Considering Alkali‐Silica Reaction
by: Chanyoung Kim, et al.
Published: (2026)

Fragility functions for low‐damage post‐tensioned timber frames
by: Michele Matteoni, et al.
Published: (2024)

Shake table tests of steel moment resisting frame with self‐centering SMA‐based isolators
by: Jiahao Huang, et al.
Published: (2024)

Performance‐based optimum seismic design of self‐centering steel moment frames with SMA‐based connections
by: Aydin Hassanzadeh, et al.
Published: (2024)

Seismic design and analysis of truss‐confined buckling‐restrained braces
by: An‐Chien Wu, et al.
Published: (2024)

Influence of masonry infills on seismic performance of BRB‐retrofitted low‐ductile RC frames
by: Rifan Chelapramkandy, et al.
Published: (2024)

Seismic performance of vertical strut and lateral brace suspended continuous‐plasterboard ceiling system with all edges free in the plane of ceiling
by: Venkatesh Patnana, et al.
Published: (2024)

Seismic resilience mechanism of self‐centering dual‐limb thin‐walled rocking piers with replaceable energy dissipation beams
by: Jin Guo, et al.
Published: (2024)

Shaking table test of a steel frame structure with layered three‐dimensional isolation
by: Yundong Shi, et al.
Published: (2024)

Selective online model updating in hybrid simulation of a full‐scale steel moment frame
by: Claudio Sepulveda, et al.
Published: (2024)

Shake‐table tests on steel moment‐resisting frames with detachable yielding zones
by: Raffaele Landolfo, et al.
Published: (2024)

Probabilistic risk assessment for reinforced concrete frame structures subject to mainshock‐aftershock sequences
by: Zhou Zhou, et al.
Published: (2024)

Phenomenological modeling of fiber‐reinforced elastomeric isolators at multiple lateral deformation levels
by: Eduardo J. Montalto, et al.
Published: (2024)

Assessing the significance of nonlinear rotational behavior in high damping rubber bearings for seismic performance of base‐isolated RC frame building
by: Tao Li, et al.
Published: (2024)

Seismic Mitigation of Freestanding Artifacts With Mass Filling
by: Baofeng Huang, et al.
Published: (2025)

Long‐range Ising model for regional‐scale seismic risk analysis
by: Sebin Oh, et al.
Published: (2024)

Theoretical model of ultimate shear capacity and flexural capacity design method of boundary elements for reinforced concrete frames with steel plate shear walls
by: Yonghui An, et al.
Published: (2024)

Seismic response analysis of single‐degree‐of‐freedom structure coupled with tuned self‐centering wall
by: Hao Wu, et al.
Published: (2024)

Study on Seismic Capacity of a Ductile RC Beam With the Repaired Damaged Plastic Hinge Zone Using Epoxy Injection or Epoxy‐Resin Mortar Coating
by: Chien‐Kuo Chiu, et al.
Published: (2025)

Modelling reinforced masonry buildings by a mechanics‐based macroelement approach
by: Stefano Bracchi, et al.
Published: (2024)

Cumulative power spectral density‐based damping estimation
by: Wonsul Kim, et al.
Published: (2024)

Design Requirements for RC Beams With Multiple Transverse Circular Openings Near Column Faces: Experimental and FEA Approaches
by: Chien‐Kuo Chiu, et al.
Published: (2025)

Direct loss‐based seismic design of low‐rise base‐isolated reinforced concrete buildings
by: Diego Suarez, et al.
Published: (2024)

Shaking table study on high‐speed train seismic derailment mechanism and verification of spectrum intensity derailment index
by: Yang Wang, et al.
Published: (2024)

Experimental study of a scaled bridge model with a unidirectional rocking isolation bearing system (Uni‐RIBS) through shaking table tests
by: Xinhao He, et al.
Published: (2024)

Enabling efficient regional seismic fragility assessment of multi‐component bridge portfolios through Gaussian process regression and active learning
by: Chunxiao Ning, et al.
Published: (2024)