Buchumschlag

Shake Table Test of a Three‐Storey Confined Precast Prestressed Hollow‐Core Wall Building

Fuente: Wiley Open Access

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Ying Zhou, Zhewen Huang, Yiqiu Lu, Rui Wang
Format:	Artículo Open Access
Veröffentlicht:	Wiley 2025
Schlagworte:	Earthquake Engineering & Structural Dynamics
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

Torsional Response of a Two‐Storey Low‐Damage Concrete Wall Test Building
von: Anqi Gu, et al.
Veröffentlicht: (2025)

Shake‐Table Tests of a Low‐Prestressed Self‐Centering Braced Frame
von: Yi Xiao, et al.
Veröffentlicht: (2025)

Nonlinear Signal‐Based Control for a Shake Table Supporting a Heavy Multi‐Storey Nonlinear Structure
von: Ryuta Enokida, et al.
Veröffentlicht: (2025)

Innovative Large‐Scale Building Specimen Designs to Maximize Shake Table Testing Outcomes
von: Robert B. Fleischman, et al.
Veröffentlicht: (2025)

Experimental Research on the Seismic Performance of Self‐Centering Precast Concrete Frames With Infill Walls
von: Shuang Li, et al.
Veröffentlicht: (2025)

Shaking Table Test of a Large‐Scale Shield Tunnel Based on an Innovative Loading Device: Theory and Validation
von: Junliang Hong, et al.
Veröffentlicht: (2025)

Shaking Table Tests of a Three‐Story Re‐Centering Steel Braced Frame with Sliding Slab Connected to Energy Dissipation Devices
von: Chung‐Che Chou, et al.
Veröffentlicht: (2025)

Pre‐fabricated TRC Panels Versus TRM Jacketing for Integrating Seismic and Energy Retrofitting: Bi‐Directional Shaking Table Tests on Three Masonry‐Infilled RC Buildings
von: Eun Rim Baek, et al.
Veröffentlicht: (2025)

Shake Table Tests on a Resilient Pile‐Supported Wharf With Damage‐Control Strategy
von: Yao Cui, et al.
Veröffentlicht: (2025)

An Offline Real‐Time Substructure Shake Table Test Method for Pile‐Supported Wharves
von: Zhuoxin Wang, et al.
Veröffentlicht: (2025)

A Large‐Scale Test of a Reinforced Concrete Core Wall Subjected to Three‐Dimensional Loading
von: Xiaodong Ji, et al.
Veröffentlicht: (2026)

Shaking Table Tests of a Full‐Scale First‐Story Rocking Isolation System in ROBUST Project
von: Yu‐Ao Lin, et al.
Veröffentlicht: (2026)

Vine‐Copula Seismic Functionality Evaluation Method of Medical Room Systems Based on Shaking Table Tests
von: Jin Liu, et al.
Veröffentlicht: (2025)

Shake Table Testing Methodology for Multistory Floor Acceleration Simulation Using a Single‐Story Test Specimen
von: Chao‐Hsien Li, et al.
Veröffentlicht: (2025)

Influence of Seismic Direction on Dynamic Responses of Wind Turbine in Operation: An Experimental Study by Combining Wind Tunnel and Shaking Table Tests
von: Baowei Ma, et al.
Veröffentlicht: (2025)

Dynamic Performance of Wind Turbines Under Yaw Angles and Seismic Inputs: Insights From Combined Wind Tunnel and Shaking Table Tests
von: Baowei Ma, et al.
Veröffentlicht: (2025)

Seismic Response of Ground Penetrating Shield Tunnels Under Lateral Harmonic Excitations: Insights From Shaking Table Test
von: Yong Yuan, et al.
Veröffentlicht: (2024)

Shaking Table Tests and Numerical Analysis of Rocking Vault‐Shaped Segmental Piers Equipped With an Annular Double Sliding System
von: Shengming Feng, et al.
Veröffentlicht: (2026)

Seismic Performance and Post‐Earthquake Reparability of Low‐Damage RC Slotted Beam Joints: An Experimental Evaluation
von: Yiqiu Lu, et al.
Veröffentlicht: (2026)

Seismic Capacity and Performance of Waffle‐Flat Plate Structures Under Near‐Fault Ground Motions: Bidirectional Shake Table Tests
von: Amadeo Benavent‐Climent, et al.
Veröffentlicht: (2025)

Shake table tests of steel moment resisting frame with self‐centering SMA‐based isolators
von: Jiahao Huang, et al.
Veröffentlicht: (2024)

Seismic Safety Evaluation of a Full‐Size Reinforced Concrete Frame Infilled With Precast Modular Reinforced Blocks Using Pseudo‐Dynamic Testing and Nonlinear Dynamic Finite Element Analysis
von: Ju‐Seong Jung, et al.
Veröffentlicht: (2024)

Shaking table test of a steel frame structure with layered three‐dimensional isolation
von: Yundong Shi, et al.
Veröffentlicht: (2024)

Shake table testing of a seismic isolation system for lightweight structures
von: Sebastian Lopez Restrepo, et al.
Veröffentlicht: (2024)

Shaking table study on high‐speed train seismic derailment mechanism and verification of spectrum intensity derailment index
von: Yang Wang, et al.
Veröffentlicht: (2024)

Seismic Testing and Performance Evaluation of Unitized Curtain Walls
von: Simona Bianchi, et al.
Veröffentlicht: (2025)

A Joint Friction Damping Model for the Seismic Analysis of Multilayer Suspended Thyristor Valve: Numerical and Shaking Table Study
von: Yuping Yang, et al.
Veröffentlicht: (2025)

Shake‐table tests on steel moment‐resisting frames with detachable yielding zones
von: Raffaele Landolfo, et al.
Veröffentlicht: (2024)

Shaking table test and numerical analyses of a multi‐story traditional tower‐style building
von: Huaiquan Ling, et al.
Veröffentlicht: (2024)

Sensitivity of seismic fragility curves to multiple parameters using CyberShake simulated ground motions
von: Houssam Al Jamal, et al.
Veröffentlicht: (2024)

Modeling and Response of a Three‐Story Steel Building With Sliding Slabs in Earthquake Motions
von: Alvaro Córdova, et al.
Veröffentlicht: (2024)

Testing, Modeling, and Application of a Two‐Stage Self‐Centering Brace for Seismic Resilience Enhancement of Rocking Core System
von: Wenchen Lie, et al.
Veröffentlicht: (2025)

Analysis of Building Indoor Earthquake Evacuation Considering Collaborative Collapse and Debris Distributions of Suspended Ceilings and Masonry Infill Walls
von: Yinghao Duan, et al.
Veröffentlicht: (2026)

Shaking table tests and numerical analysis of RC coupled shear wall structure with hybrid replaceable coupling beams
von: Nan Gong, et al.
Veröffentlicht: (2024)

Proposal and Validation of an Equivalent Damping Equation for Predicting the Response of Damaged RC Buildings in Aftershocks Using E‐Defense Data of a Three‐Story Building
von: Kyungjin Kim, et al.
Veröffentlicht: (2025)

Estimation of Lateral Drifts of RC Wall Structural System by Monitored Coupling Beams
von: Yu‐Jiang Zhou, et al.
Veröffentlicht: (2025)

Shake table testing and finite element modeling of a modular prefabricated concrete bridge‐like specimen accounting for geometry imperfections and additional damping
von: Antonios A. Katsamakas, et al.
Veröffentlicht: (2024)

Efficient Simulation‐Based Seismic Hazard and Demand Assessment Leveraging Monte Carlo Catalogs and Reduced‐Order Modeling: Application to CyberShake
von: Naveen Senthil
Veröffentlicht: (2025)

Experimental Study on Seismic Performance of Hybrid Coupled Wall Systems With Friction Steel Truss Coupling Beams
von: Qi Tang, et al.
Veröffentlicht: (2026)

Geometric Limits for the Seismic Design of Unreinforced Masonry Fence Walls
von: Youngjun Choi, et al.
Veröffentlicht: (2025)