Experimental and Analytical Study of a Novel Friction Pendulum Bearing With Uplift Restraint
Fuente:
Wiley Open Access
Gespeichert in:
| Hauptverfasser: | Jun Li, Long‐He Xu, Xing‐Si Xie, Ge Zhang |
|---|---|
| Format: | Artículo Open Access |
| Veröffentlicht: |
Wiley
2025
|
| Schlagworte: | |
| Online-Zugang: | |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Ähnliche Einträge
Experimental Analysis of Mechanical Properties of Disc Spring Uplift‐Restraining Friction Pendulum System
von: Xiaodong Li, et al.
Veröffentlicht: (2026)
von: Xiaodong Li, et al.
Veröffentlicht: (2026)
Controllable Uplift‐Rocking Bridges With Tall Double‐Column Bents: Concept, Analytical Model, and Seismic Behavior
von: Junfeng Jia, et al.
Veröffentlicht: (2025)
von: Junfeng Jia, et al.
Veröffentlicht: (2025)
Experimental Study on Seismic Performance of Hybrid Coupled Wall Systems With Friction Steel Truss Coupling Beams
von: Qi Tang, et al.
Veröffentlicht: (2026)
von: Qi Tang, et al.
Veröffentlicht: (2026)
A Joint Friction Damping Model for the Seismic Analysis of Multilayer Suspended Thyristor Valve: Numerical and Shaking Table Study
von: Yuping Yang, et al.
Veröffentlicht: (2025)
von: Yuping Yang, et al.
Veröffentlicht: (2025)
Experimental Investigation of a Three‐Dimensional Isolation System Combining One‐Dimensional Periodic Material and Elastomeric Bearing
von: Sanjay R. Kumawat, et al.
Veröffentlicht: (2026)
von: Sanjay R. Kumawat, et al.
Veröffentlicht: (2026)
Efficacy of Pendulum Tuned Mass Dampers in Reducing Overturning Risk of Rocking Blocks Subjected to Artificial Accelerograms
von: Duque Edwin, et al.
Veröffentlicht: (2024)
von: Duque Edwin, et al.
Veröffentlicht: (2024)
Assessing the significance of nonlinear rotational behavior in high damping rubber bearings for seismic performance of base‐isolated RC frame building
von: Tao Li, et al.
Veröffentlicht: (2024)
von: Tao Li, et al.
Veröffentlicht: (2024)
Adaptive Base Isolation System with Elastomeric Bearings: Multi‐Stage Fiber‐Reinforced Elastomeric Bearings (MS‐FRBs) for Tailoring Response to Ground Motion Demands
von: Simone Galano, et al.
Veröffentlicht: (2025)
von: Simone Galano, et al.
Veröffentlicht: (2025)
Modeling the Multiaxial Behavior of High Damping Rubber Bearings (HDRBs)
von: José A. Gallardo, et al.
Veröffentlicht: (2025)
von: José A. Gallardo, et al.
Veröffentlicht: (2025)
Enhancing Structural Dynamic Stability Using Two‐Stage Friction Connections (TFCs)
von: Zheng Luo, et al.
Veröffentlicht: (2025)
von: Zheng Luo, et al.
Veröffentlicht: (2025)
Experimental Study on Seismic Behavior of a New Separately‐Anchored Self‐Centering Beam‐Column Connection
von: Lu‐Xi Li, et al.
Veröffentlicht: (2024)
von: Lu‐Xi Li, et al.
Veröffentlicht: (2024)
Analytical Study on the Predictability of Controlled Rocking Frame and Podium Systems
von: Marawan Zaki, et al.
Veröffentlicht: (2025)
von: Marawan Zaki, et al.
Veröffentlicht: (2025)
Friction Characterization and Mitigation in Large‐Scale 6DOF Multi‐Axial Hybrid Simulation
von: Pedram Mortazavi, et al.
Veröffentlicht: (2025)
von: Pedram Mortazavi, et al.
Veröffentlicht: (2025)
Behavior of Lightweight Wood‐Frame Shear Walls with Plybamboo and Wood Sheathing Panels: Experimental Study, Numerical Simulation, and Parametric Models for the Design Process
von: Ruijia Wu, et al.
Veröffentlicht: (2025)
von: Ruijia Wu, et al.
Veröffentlicht: (2025)
Advanced Design Method for Failure Control in Column‐Drilled Shaft Sockets: A Combined Experimental and Numerical Study
von: Zeng Zeng, et al.
Veröffentlicht: (2025)
von: Zeng Zeng, et al.
Veröffentlicht: (2025)
Low‐Cost Friction‐Based Force‐Limiting Connection With Reduced Sensitivity to Machining Tolerances and Accelerated Repairability
von: Kaixin Chen, et al.
Veröffentlicht: (2026)
von: Kaixin Chen, et al.
Veröffentlicht: (2026)
A Novel Hybrid Method for Vision‐Based Target‐Free Dynamic Displacement Measurement of Civil Structures Under Seismic Excitation
von: Yiming Zhang, et al.
Veröffentlicht: (2025)
von: Yiming Zhang, et al.
Veröffentlicht: (2025)
Experimental Study on the Dynamic Response Characteristics of the Floating Bridge Considering Pontoon Failure Under the Combined Action of Earthquakes and Waves
von: Ruicong Wu, et al.
Veröffentlicht: (2025)
von: Ruicong Wu, et al.
Veröffentlicht: (2025)
Experimental study and multi‐scale refinement model of high damping acrylic polymer matrix VEDs for civil structural seismic retrofit
von: Yao‐Rong Dong, et al.
Veröffentlicht: (2024)
von: Yao‐Rong Dong, et al.
Veröffentlicht: (2024)
Experimental Study on a Subwavelength Auxetic Pile‐Type Metamaterial for Seismic Wave Attenuation
von: Hsiang‐Hao Hsieh, et al.
Veröffentlicht: (2025)
von: Hsiang‐Hao Hsieh, et al.
Veröffentlicht: (2025)
Response of Bell‐Spigot Jointed Ductile Iron Pipelines Under Different Normal Fault‐Pipe Crossing Positions: Full‐Scale Experiment and Analytical Solution
von: Qingshu Chen, et al.
Veröffentlicht: (2025)
von: Qingshu Chen, et al.
Veröffentlicht: (2025)
Analysis of Building Indoor Earthquake Evacuation Considering Collaborative Collapse and Debris Distributions of Suspended Ceilings and Masonry Infill Walls
von: Yinghao Duan, et al.
Veröffentlicht: (2026)
von: Yinghao Duan, et al.
Veröffentlicht: (2026)
Experimental Investigation on Aerodynamic‐Seismic Coupled Responses of the IEA 15 MW Monopile Offshore Wind Turbine
von: Kehao Qian, et al.
Veröffentlicht: (2026)
von: Kehao Qian, et al.
Veröffentlicht: (2026)
Experimental study of a scaled bridge model with a unidirectional rocking isolation bearing system (Uni‐RIBS) through shaking table tests
von: Xinhao He, et al.
Veröffentlicht: (2024)
von: Xinhao He, et al.
Veröffentlicht: (2024)
Three‐Dimensional Analytical Model of a Free‐Standing Square Rocking Column
von: Dimitra Adamopoulou, et al.
Veröffentlicht: (2026)
von: Dimitra Adamopoulou, et al.
Veröffentlicht: (2026)
Experimental and analytical studies of infill wall with sliding joints considering a door opening
von: Weiyuan Huang, et al.
Veröffentlicht: (2024)
von: Weiyuan Huang, et al.
Veröffentlicht: (2024)
Time‐ and State‐Dependent Damage Accumulation Due to Aftershocks Under an M9.0 Megathrust Earthquake in the Cascadia Subduction Zone
von: Hongzhou Zhang, et al.
Veröffentlicht: (2026)
von: Hongzhou Zhang, et al.
Veröffentlicht: (2026)
Influence of Seismic Direction on Dynamic Responses of Wind Turbine in Operation: An Experimental Study by Combining Wind Tunnel and Shaking Table Tests
von: Baowei Ma, et al.
Veröffentlicht: (2025)
von: Baowei Ma, et al.
Veröffentlicht: (2025)
Experimental Research on the Seismic Performance of Self‐Centering Precast Concrete Frames With Infill Walls
von: Shuang Li, et al.
Veröffentlicht: (2025)
von: Shuang Li, et al.
Veröffentlicht: (2025)
Seismic Performance and Post‐Earthquake Reparability of Low‐Damage RC Slotted Beam Joints: An Experimental Evaluation
von: Yiqiu Lu, et al.
Veröffentlicht: (2026)
von: Yiqiu Lu, et al.
Veröffentlicht: (2026)
A Novel Self‐Centering Mechanical Model for Shape Memory Alloys Incorporating Cyclic Degradation
von: Wenlang Yuan, et al.
Veröffentlicht: (2025)
von: Wenlang Yuan, et al.
Veröffentlicht: (2025)
A Novel Optimal Design Method for Tuned Mass Dampers With Viscoelastic Motion‐Limiting Stoppers
von: Gaoqiang Qu, et al.
Veröffentlicht: (2025)
von: Gaoqiang Qu, et al.
Veröffentlicht: (2025)
Finite Element Modeling and Seismic Performance of Uni‐RIBS in Bridges under Maximum Considered Earthquakes
von: Ruihong Xie, et al.
Veröffentlicht: (2026)
von: Ruihong Xie, et al.
Veröffentlicht: (2026)
Analytical Floor Response Spectra for Performance‐Based Seismic Design of Non‐structural Elements in Reinforced Concrete Frame Buildings
von: Roberto J. Merino, et al.
Veröffentlicht: (2026)
von: Roberto J. Merino, et al.
Veröffentlicht: (2026)
Experimental Seismic Response Assessment of Tall Buildings With Large Mass Damping
von: Miguel Martinez‐Paneda, et al.
Veröffentlicht: (2025)
von: Miguel Martinez‐Paneda, et al.
Veröffentlicht: (2025)
A rigid‐flexible coupled rocking structure with nonlinear stress distribution along its base: Analytical modeling, validation and parametric investigation
von: Yu Bao, et al.
Veröffentlicht: (2024)
von: Yu Bao, et al.
Veröffentlicht: (2024)
Seismic Performance of Lightweight Steel Shear Walls With Gypsum Sheathing: Experimental Investigation
von: Luigi Fiorino, et al.
Veröffentlicht: (2025)
von: Luigi Fiorino, et al.
Veröffentlicht: (2025)
Experimentally‐based in‐plane drift limits for the upper threshold of masonry light damage
von: Paul A. Korswagen, et al.
Veröffentlicht: (2024)
von: Paul A. Korswagen, et al.
Veröffentlicht: (2024)
Efficient Seismic Response Modeling for 3D Building Clusters Incorporating Site‐City Interaction: A Semi‐Analytical Framework and Parametric Investigation
von: Zhenning Ba, et al.
Veröffentlicht: (2026)
von: Zhenning Ba, et al.
Veröffentlicht: (2026)
Machine Learning‐Enhanced Ground Motion Prediction Incorporating 2D Pile–Soil–Structure Interaction Effects for Seismic Site Amplification Assessment
von: Haonan Zhan, et al.
Veröffentlicht: (2026)
von: Haonan Zhan, et al.
Veröffentlicht: (2026)
Ähnliche Einträge
-
Experimental Analysis of Mechanical Properties of Disc Spring Uplift‐Restraining Friction Pendulum System
von: Xiaodong Li, et al.
Veröffentlicht: (2026) -
Controllable Uplift‐Rocking Bridges With Tall Double‐Column Bents: Concept, Analytical Model, and Seismic Behavior
von: Junfeng Jia, et al.
Veröffentlicht: (2025) -
Experimental Study on Seismic Performance of Hybrid Coupled Wall Systems With Friction Steel Truss Coupling Beams
von: Qi Tang, et al.
Veröffentlicht: (2026) -
A Joint Friction Damping Model for the Seismic Analysis of Multilayer Suspended Thyristor Valve: Numerical and Shaking Table Study
von: Yuping Yang, et al.
Veröffentlicht: (2025) -
Experimental Investigation of a Three‐Dimensional Isolation System Combining One‐Dimensional Periodic Material and Elastomeric Bearing
von: Sanjay R. Kumawat, et al.
Veröffentlicht: (2026)