Electrochemical Performance of Highly Oxygen‐Permeable Ba(Co,Fe,Y)O 3 ‐Based Cathodes in Protonic Ceramic Fuel Cells
Fuente:
Wiley Open Access
Saved in:
| Main Authors: | , , , , , , , , , |
|---|---|
| Format: | Artículo Open Access |
| Published: |
Wiley
2026
|
| Subjects: | |
| Online Access: | |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1867009187649683457 |
|---|---|
| author | Konosuke Watanabe Aman Sharma Masaya Fujioka Yuki Yamaguchi Katsuhiro Nomura Hirofumi Sumi Md Saiful Alam Isao Kagomiya Yasunobu Mizutani Hiroyuki Shimada |
| author_facet | Konosuke Watanabe Aman Sharma Masaya Fujioka Yuki Yamaguchi Katsuhiro Nomura Hirofumi Sumi Md Saiful Alam Isao Kagomiya Yasunobu Mizutani Hiroyuki Shimada Konosuke Watanabe Aman Sharma Masaya Fujioka Yuki Yamaguchi Katsuhiro Nomura Hirofumi Sumi Md Saiful Alam Isao Kagomiya Yasunobu Mizutani Hiroyuki Shimada |
| collection | Wiley Open Access |
| contents | Electrochemical Performance of Highly Oxygen‐Permeable Ba(Co,Fe,Y)O 3 ‐Based Cathodes in Protonic Ceramic Fuel Cells Konosuke Watanabe Aman Sharma Masaya Fujioka Yuki Yamaguchi Katsuhiro Nomura Hirofumi Sumi Md Saiful Alam Isao Kagomiya Yasunobu Mizutani Hiroyuki Shimada Fuel Cells ABSTRACT Protonic ceramic fuel cells (PCFCs) have high energy conversion efficiencies and can be employed as next‐generation fuel cells. However, novel cathode materials with high electrochemical performances at low operating temperatures are required to practically apply PCFCs. BaCo 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3– δ (BCFZrY) is a promising material for PCFC cathodes owing to its low electrode polarization resistance ( R p ). Herein, instead of Zr doping, BaCo 0.4 Fe 0.4 A 0.1 Y 0.1 O 3– δ (BCF A Y) compounds, where A represents Ti, Mg, or Zn, were evaluated as PCFC cathode materials. BCF A Y ( A : Ti, Mg, or Zn) compounds have a higher oxygen permeability than BCFZrY. The electrochemical properties and power generation performance of the PCFCs with BCF A Y cathodes were measured and compared with those of PCFCs with BCFZrY cathodes. The PCFC with a BCFMgY cathode exhibited the lowest R p , leading to the highest power density, that is, 0.80 W cm −2 at 600°C. In addition, for all PCFCs with BCFY‐based cathodes, the reciprocal area‐specific resistances of R p and oxygen permeability fluxes of the cathode materials had an approximately proportional relationship. Therefore, it was confirmed that PCFC cathodes with a high oxygen permeability had a low cathode polarization resistance, which significantly enhanced the power generation performance of PCFCs. 10.1002/fuce.70042 http://onlinelibrary.wiley.com/termsAndConditions#vor |
| doi_str_mv | 10.1002/fuce.70042 |
| format | Artículo Open Access |
| id | wiley_oa_10_1002_fuce_70042 |
| institution | Wiley Open Access |
| license_str_mv | http://onlinelibrary.wiley.com/termsAndConditions#vor |
| publishDate | 2026 |
| publisher | Wiley |
| record_format | wiley_oa |
| spellingShingle | Electrochemical Performance of Highly Oxygen‐Permeable Ba(Co,Fe,Y)O 3 ‐Based Cathodes in Protonic Ceramic Fuel Cells Konosuke Watanabe Aman Sharma Masaya Fujioka Yuki Yamaguchi Katsuhiro Nomura Hirofumi Sumi Md Saiful Alam Isao Kagomiya Yasunobu Mizutani Hiroyuki Shimada Fuel Cells Electrochemical Performance of Highly Oxygen‐Permeable Ba(Co,Fe,Y)O 3 ‐Based Cathodes in Protonic Ceramic Fuel Cells Konosuke Watanabe Aman Sharma Masaya Fujioka Yuki Yamaguchi Katsuhiro Nomura Hirofumi Sumi Md Saiful Alam Isao Kagomiya Yasunobu Mizutani Hiroyuki Shimada Fuel Cells ABSTRACT Protonic ceramic fuel cells (PCFCs) have high energy conversion efficiencies and can be employed as next‐generation fuel cells. However, novel cathode materials with high electrochemical performances at low operating temperatures are required to practically apply PCFCs. BaCo 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3– δ (BCFZrY) is a promising material for PCFC cathodes owing to its low electrode polarization resistance ( R p ). Herein, instead of Zr doping, BaCo 0.4 Fe 0.4 A 0.1 Y 0.1 O 3– δ (BCF A Y) compounds, where A represents Ti, Mg, or Zn, were evaluated as PCFC cathode materials. BCF A Y ( A : Ti, Mg, or Zn) compounds have a higher oxygen permeability than BCFZrY. The electrochemical properties and power generation performance of the PCFCs with BCF A Y cathodes were measured and compared with those of PCFCs with BCFZrY cathodes. The PCFC with a BCFMgY cathode exhibited the lowest R p , leading to the highest power density, that is, 0.80 W cm −2 at 600°C. In addition, for all PCFCs with BCFY‐based cathodes, the reciprocal area‐specific resistances of R p and oxygen permeability fluxes of the cathode materials had an approximately proportional relationship. Therefore, it was confirmed that PCFC cathodes with a high oxygen permeability had a low cathode polarization resistance, which significantly enhanced the power generation performance of PCFCs. 10.1002/fuce.70042 http://onlinelibrary.wiley.com/termsAndConditions#vor |
| title | Electrochemical Performance of Highly Oxygen‐Permeable Ba(Co,Fe,Y)O 3 ‐Based Cathodes in Protonic Ceramic Fuel Cells |
| topic | Fuel Cells |
| url | https://onlinelibrary.wiley.com/doi/10.1002/fuce.70042 |