Buchumschlag

Enhancement of Heat Transfer in Double‐Pipe Heat Exchangers Using Wavy Edge Twisted Tape With Varying Twist Ratios and Perforated Diameters

Fuente: Wiley Open Access

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Zainab Mahdi Saleh, Riyadh S. Al‐Turaihi, Zena Khalefa Kadhim
Format:	Artículo Open Access
Veröffentlicht:	Wiley 2025
Schlagworte:	Heat Transfer
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

IIoT Implementation to Investigate the Heat Transfer Efficiency of a Concentric Corrugated Pipe Heat Exchanger
von: Songkran Wiriyasart, et al.
Veröffentlicht: (2025)

Design and Optimization of a Compact U‐Shaped Internal‐Condenser Heat‐Pipe Heat Exchanger for High‐Ventilation Heating, Ventilation, and Air Conditioning in Hot–Dry Climates
von: Noora S. Mahdi, et al.
Veröffentlicht: (2026)

Analysis of Hydrothermal Flow and Performance of Heat Transfer in 3D Pipes Based on Varying Dimple Structure Configurations
von: Saad Raad Al‐Haidari, et al.
Veröffentlicht: (2024)

Hydrothermal Performance Enhancement of Minichannel Heat Sink With Inline and Staggered Arrangements of Straight and Wavy Fins
von: Noor Ahmed Ammar, et al.
Veröffentlicht: (2025)

Investigation of Hydrothermal Characteristics in Heat‐Exchanger Tubes Featuring a Novel Perforated Ramp‐Shaped Turbulator
von: Mustafa Abdullah, et al.
Veröffentlicht: (2026)

Numerical Enhancement of Forced Convection Heat Transfer Characteristics for Skewed Wavy Channel Partially Inserted With Copper Metal Foam
von: Nooralhuda A. Mohammed, et al.
Veröffentlicht: (2025)

Comparative Analysis of Heat Exchanger Models for Phase Change Material Melting Process: Experimental and Numerical Investigation
von: Hussein Hatem Saleh, et al.
Veröffentlicht: (2024)

Optimization of Fill Ratio and Angle Improved Energy Efficiency in Two‐Phase Copper Heat Pipes
von: Wasurat Bunpheng, et al.
Veröffentlicht: (2026)

Numerical Investigation of Heat Transfer in Simultaneously Developing Laminar Flow in a Circular Pipe
von: Ali Belhocine, et al.
Veröffentlicht: (2025)

Design Optimization of a Plate‐Fin Heat Exchanger With Metaheuristic Hybrid Algorithm
von: Santosh L. Pachpute, et al.
Veröffentlicht: (2024)

Numerical and Experimental Investigation of Fin Angle Influence on Compact Heat Exchanger Efficiency
von: Aseel k. Shyaa, et al.
Veröffentlicht: (2025)

Minimizing Entropy Generation in Heat Exchanger Tubes With Ball Inserts: Numerical Simulation
von: Luan Nguyen Thanh
Veröffentlicht: (2026)

Investigation of Thermal–Hydraulic Behavior of Natural Cooling‐Based Pillow‐Plate Heat Exchangers
von: Kailas R. Dudhe, et al.
Veröffentlicht: (2026)

Combined Flow and Temperature Nonuniformity in Compact Cross‐Flow Three‐Fluid Heat Exchangers
von: Harpreet K. Aasi, et al.
Veröffentlicht: (2025)

The Role of Perforated Pin Fins in Forced Convection for Heat Dissipation Systems
von: Mahmoud Sh. Mahmoud, et al.
Veröffentlicht: (2026)

Optimizing Heat Exchanger Performance and Thermal Efficiency Using Different Fluid Blends in Power Plants
von: Kulandaivel Duraisamy, et al.
Veröffentlicht: (2025)

Investigation of Titanium Oxide Coating on Copper Heat Exchanger Surface for the Inhibition of Calcium Carbonate Scaling
von: Kaleemullah Shaikh, et al.
Veröffentlicht: (2026)

Performance Analysis of Nature‐Inspired Branched Fins for Rapid Charging in Double‐Pipe Latent Heat Thermal Energy Storage Systems
von: Hayder I. Mohammed
Veröffentlicht: (2026)

Geometric Optimization of Multitube Heat Exchangers for Enhanced Thermal Performance in PCM‐based Energy Storage Systems
von: Hussein A. Abdullhussein, et al.
Veröffentlicht: (2025)

Numerical Simulations of Heat and Mass Transfer Enhancement Over a Rotating Cone
von: Saquib Ul Zaman, et al.
Veröffentlicht: (2024)

Thermal Performance of a PCM‐Filled Finned Tube Heat Exchanger for Energy Recovery of Hot Exhaust Gases
von: Mohaddeseh Rajabzadeh, et al.
Veröffentlicht: (2025)

Correction to “Design and Analysis of a Hybrid Double‐End Flat Heat Pipe‐Fins Battery Thermal Management System at High‐Rate Discharge”
Veröffentlicht: (2026)

Numerical Investigation to Analyze the Effect of Various Operating Parameters on the Thermal Characteristics of Heat Pipe
von: Jobin Jose, et al.
Veröffentlicht: (2025)

A Detailed Review of Colburn and Friction Factors for Various Types of Fins Used in Compact Plate‐Fin Heat Exchangers
von: Chennu Ranganayakulu
Veröffentlicht: (2026)

Extensive Investigation of Hydrothermal Flow and Heat Performance Improvement in a 3D Tube Based on Varying Concavity Dimple and Corrugation Turbulator Configurations
von: Saad Raad Al‐Haidari, et al.
Veröffentlicht: (2025)

Optimizing Minichannel Heat Sink Design: A Combined Numerical and Experimental Analysis of Inlet/Outlet Configurations and Pin Fin Enhancements
von: Hind Mahmood, et al.
Veröffentlicht: (2024)

Optimization of Heat Transfer in a Circular Cavity With and Without a Cold Cylindrical Insert
von: Ahmed A. Y. Al‐Waaly, et al.
Veröffentlicht: (2026)

Numerical Investigation of Vibration‐Assisted Heat Transfer Under Sinusoidal and Square Wave Shapes for Potential Reductions in the Heat Sink and Cooling System Size
von: Ambagaha Hewage Dona Kalpani Rasangika, et al.
Veröffentlicht: (2025)

Second‐Law Analysis of Mini/Micro Counterflow Parallel‐Plate Heat Exchangers: Optimizing Effectiveness by Minimizing Wall Entropy Production
von: Santiago E. Ibáñez, et al.
Veröffentlicht: (2025)

Optical and Thermal Performance Enhancement of a Parabolic Trough Solar Collector With Helical Turbulators and Modified Receiver Geometries
von: Kadhim H. Suffer, et al.
Veröffentlicht: (2026)

Enhancement of Heat Transfer in a Cavity Containing a Periodically Moving Flexible Fin: Application of NEPCM
von: Nehila Tarek, et al.
Veröffentlicht: (2025)

Feasibility Study on Designing a Heat Pipe to Reduce the Air Temperature in the Compressor of a Gas Turbine
von: Ali Sistaninia, et al.
Veröffentlicht: (2025)

Effect of Interface Bonding on Optimizing the Heat Transfer in Substrate Board With an Array of Heat Sources
von: Y. Aditya Varma, et al.
Veröffentlicht: (2024)

Numerical and Experimental Analysis of Fin Geometry Effects on Heat Sink Performance in Thermoelectric Air‐Cooling Systems
von: Ali M. Ashour, et al.
Veröffentlicht: (2025)

Numerical Investigation of Heat Transfer Enhancement and Flow Behavior Over an Inline Circular Dimpled Plate Using CFD
von: Amal Oliwie, et al.
Veröffentlicht: (2026)

Heat Transfer and Natural Convection in an Internally Heated Porous Box Container With Variable Gravity Field
von: Amit Mahajan, et al.
Veröffentlicht: (2025)

Entropy Generation, Heat, and Mass Transfer in a Vertical Channel With Immiscible Fluids and Asymmetric Heat Distribution
von: Kasula Santhosh, et al.
Veröffentlicht: (2025)

Discrete Symmetry Analysis of Magnetohydrodynamic Convective Heat and Mass Transfer With Joule Heating in Cylindrical Porous Annular Microchannels
von: Tentu Sarala, et al.
Veröffentlicht: (2026)

Semi‐Analytical Solution of Thermoacoustic Heat Transfer in a Pulse Tube in the Presence of Pulsating Internal Heat Source
von: Fatemeh Sobhnamayan, et al.
Veröffentlicht: (2025)

MHD Heat Transfer Enhancement in a Curvilinear Enclosure With Oscillating Wall and Nano‐Encapsulated PCM: A Fluid‐Structure Interaction Analysis
von: Mohammed Azeez Alomari, et al.
Veröffentlicht: (2025)