Field‐Based Spatial Self‐Registration of Multicoil Hardware for B 0 Field Control
Fuente:
Wiley Open Access
Gespeichert in:
| Hauptverfasser: | , , , , |
|---|---|
| Format: | Artículo Open Access |
| Veröffentlicht: |
Wiley
2026
|
| Schlagworte: | |
| Online-Zugang: | |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| _version_ | 1867006786769256448 |
|---|---|
| author | Isabelle Zinghini Ian Macleod Carlotta Ianniello Sebastian Theilenberg Christoph Juchem |
| author_facet | Isabelle Zinghini Ian Macleod Carlotta Ianniello Sebastian Theilenberg Christoph Juchem Isabelle Zinghini Ian Macleod Carlotta Ianniello Sebastian Theilenberg Christoph Juchem |
| collection | Wiley Open Access |
| contents | Field‐Based Spatial Self‐Registration of Multicoil Hardware for B 0 Field Control Isabelle Zinghini Ian Macleod Carlotta Ianniello Sebastian Theilenberg Christoph Juchem Magnetic Resonance in Medicine ABSTRACT Purpose To develop and validate a magnetic field‐based method for self‐registration of multicoil (MC) shim hardware in MRI systems, enabling accurate B 0 field control despite nonreproducible hardware placement between calibration and experimental sessions. Methods An algorithm was designed to estimate rigid transformations between 3D field maps acquired during hardware calibration (Reference field) and subsequent experiments (Measured field). Hardware misplacement was determined by co‐registration of the two fields within a defined region of interest. Simulations using Biot–Savart–derived MC basis fields and experimental validation with a 48‐channel MC array at 3 T were used to quantify localization accuracy under varying signal‐to‐noise ratio (SNR) levels. A genetic algorithm optimized coil currents to generate a Reference field shape that yielded minimal self‐registration error. Results Simulations and measurements demonstrated that submillimeter (≤ 0.5 mm) and subdegree (≤ 0.5°) localization accuracy is achievable at practical SNR levels (≥ 5). Errors decreased with increasing SNR and field complexity. The optimized field produced by the genetic algorithm yielded the lowest mean translation error (0.20 mm) and rotation error (0.11°), consistent with theoretical predictions. Self‐registration computation required less than 10 s per case. Conclusion The proposed field‐based self‐registration method enables rapid, accurate localization of MC shim hardware using only MR‐acquired field maps, eliminating the need for external tracking hardware or repeated calibrations. This approach enhances reproducibility of MC field control and supports improved B 0 shimming performance in insert‐based or repositionable MR systems. 10.1002/mrm.70413 http://creativecommons.org/licenses/by-nc/4.0/ |
| doi_str_mv | 10.1002/mrm.70413 |
| format | Artículo Open Access |
| id | wiley_oa_10_1002_mrm_70413 |
| institution | Wiley Open Access |
| license_str_mv | http://creativecommons.org/licenses/by-nc/4.0/ |
| publishDate | 2026 |
| publisher | Wiley |
| record_format | wiley_oa |
| spellingShingle | Field‐Based Spatial Self‐Registration of Multicoil Hardware for B 0 Field Control Isabelle Zinghini Ian Macleod Carlotta Ianniello Sebastian Theilenberg Christoph Juchem Magnetic Resonance in Medicine Field‐Based Spatial Self‐Registration of Multicoil Hardware for B 0 Field Control Isabelle Zinghini Ian Macleod Carlotta Ianniello Sebastian Theilenberg Christoph Juchem Magnetic Resonance in Medicine ABSTRACT Purpose To develop and validate a magnetic field‐based method for self‐registration of multicoil (MC) shim hardware in MRI systems, enabling accurate B 0 field control despite nonreproducible hardware placement between calibration and experimental sessions. Methods An algorithm was designed to estimate rigid transformations between 3D field maps acquired during hardware calibration (Reference field) and subsequent experiments (Measured field). Hardware misplacement was determined by co‐registration of the two fields within a defined region of interest. Simulations using Biot–Savart–derived MC basis fields and experimental validation with a 48‐channel MC array at 3 T were used to quantify localization accuracy under varying signal‐to‐noise ratio (SNR) levels. A genetic algorithm optimized coil currents to generate a Reference field shape that yielded minimal self‐registration error. Results Simulations and measurements demonstrated that submillimeter (≤ 0.5 mm) and subdegree (≤ 0.5°) localization accuracy is achievable at practical SNR levels (≥ 5). Errors decreased with increasing SNR and field complexity. The optimized field produced by the genetic algorithm yielded the lowest mean translation error (0.20 mm) and rotation error (0.11°), consistent with theoretical predictions. Self‐registration computation required less than 10 s per case. Conclusion The proposed field‐based self‐registration method enables rapid, accurate localization of MC shim hardware using only MR‐acquired field maps, eliminating the need for external tracking hardware or repeated calibrations. This approach enhances reproducibility of MC field control and supports improved B 0 shimming performance in insert‐based or repositionable MR systems. 10.1002/mrm.70413 http://creativecommons.org/licenses/by-nc/4.0/ |
| title | Field‐Based Spatial Self‐Registration of Multicoil Hardware for B 0 Field Control |
| topic | Magnetic Resonance in Medicine |
| url | https://onlinelibrary.wiley.com/doi/10.1002/mrm.70413 |