Buchumschlag

Comprehensive evaluation of energy absorption characteristics of Al‐CFRP hybrid tube under radial impacts

Fuente: Wiley Open Access

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Qihua Ma, Na Nie, Shuhui Zhang, Xuehui Gan
Format:	Artículo Open Access
Veröffentlicht:	Wiley 2024
Schlagworte:	Polymer Composites
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

Damage failure analysis of CFRP / Al composite multi‐cell tubes under multiple loads
von: Shuhui Zhang, et al.
Veröffentlicht: (2025)

Flexural properties and evaluation of Al‐CFRP self‐pierce riveted laminates under three‐point bending loads
von: Yazhe Wang, et al.
Veröffentlicht: (2024)

Analysis and Optimization of Energy‐Absorbing Characteristics of Additively Manufactured Carbon Fiber Reinforced Nylon Composite Biomimetic Tubes
von: Guiming Chen, et al.
Veröffentlicht: (2026)

Energy absorption properties of filament wound aluminum/ CFRP hybrid tubes: Axial, lateral, and bending loadings
von: Mehmet Murat Demir, et al.
Veröffentlicht: (2025)

Experimental and numerical investigation of energy absorption of CFRP/AL bionic tubes inspired by lotus stem structure
von: Xiangjin Qi, et al.
Veröffentlicht: (2025)

Comprehensive performance evaluation of HGM hybrid modified resins: Excellent high resistivity terahertz shielding and impact energy absorption properties
von: Zhiqiang Wang, et al.
Veröffentlicht: (2024)

Evaluation of crush and energy absorption characteristics of corrugated origami tube by additive manufacturing
von: Xudong Sun, et al.
Veröffentlicht: (2024)

Compression behavior of the CFRP square tubes after low‐velocity impact
von: Ye Wu, et al.
Veröffentlicht: (2025)

Comparison of the dynamic characteristics of GFRP , CFRP, and hybrid composites subjected to repeated low‐velocity impact
von: Betul Sozen, et al.
Veröffentlicht: (2024)

Study on the impact resistance of bio‐inspired Bouligand‐type CFRP under repeated impacts
von: Wenkai Yan, et al.
Veröffentlicht: (2025)

Low velocity impact resistance of hybrid CFRP ‐elastomer‐metal laminates: Influence of stacking sequence and impact conditions on damage mechanisms
von: Zhongyu Li, et al.
Veröffentlicht: (2024)

Induced structure and its gradient design on energy absorption properties and failure behavior of aluminum/carbon fiber reinforced polypropylene super hybrid tube
von: Li Huaguan, et al.
Veröffentlicht: (2024)

Energy absorption properties of origami‐based re‐entrant honeycomb sandwich structures with CFRP subjected to low‐velocity impact
von: Zhen Cui, et al.
Veröffentlicht: (2024)

Deformation and energy absorption properties of hollow glass microsphere/polyurethane lightweight core reinforced carbon fiber tubes under lateral compression
von: He Wang, et al.
Veröffentlicht: (2024)

Performance optimization and reliability analysis of CFRP adhesive‐rivet hybrid joint
von: Hailiang Su, et al.
Veröffentlicht: (2025)

Structural analysis of variable‐stiffness composite tubes produced by filament winding under radial compression and holes influence
von: Eduardo Gerhardt, et al.
Veröffentlicht: (2024)

Experimental and numerical investigation on the tensile performances of bonded/bolted hybrid CFRP‐AL joints
von: Wenlong Mu, et al.
Veröffentlicht: (2025)

Damage mechanism and evaluation of ultrasonic vibration nanolubricant grinding CFRP composites
von: Teng Gao, et al.
Veröffentlicht: (2025)

Comprehensive behavior of CFRP laminates with an open hole repaired by prepreg patches in microwave field
von: Xiaobao Zhu, et al.
Veröffentlicht: (2025)

Bending characteristics of partially reinforced aluminum/CFRP hybrid hat‐section beam structures with an adhesively bonded joint: An experimental, numerical, and analytical study
von: Hamed Hampaiyan Miandowab, et al.
Veröffentlicht: (2024)

Study on the tensile failure mechanisms of CFRP‐Al flat‐joggle‐flat bonded joints
von: Gao QingXin, et al.
Veröffentlicht: (2024)

Effects of different mass ratios on mechanical properties and impact energy release characteristics of Al/PTFE/W and Al/PTFE/CuO polymer composites
von: Xiangchun Xu, et al.
Veröffentlicht: (2024)

Quantitative investigation on ballistic resistance and energy absorption behavior of columnar ceramic/interlayer hybrid fiber composites
von: Yang Jiang, et al.
Veröffentlicht: (2024)

Theoretical prediction model for the compressive behavior of the hybrid tube considering compression angle
von: Baichuan Liu, et al.
Veröffentlicht: (2024)

Investigating the bonding performance of metal‐CFRP hybrid composites: A study on aircraft components
von: Yavuz Akalın, et al.
Veröffentlicht: (2024)

Effects of structural parameters on the load distribution unevenness in CFRP hybrid bonded‐bolted joint
von: Jianwei Shi, et al.
Veröffentlicht: (2024)

Influence of the distance between projectiles in simultaneous multiple impacts on CFRP laminates
von: Marco A. Paredes‐Gordillo, et al.
Veröffentlicht: (2024)

Design, optimization, manufacture, and tests of CFRP hydraulic cylinder tube without metal liner: A bionic thorn‐tooth connection
von: Yao Li, et al.
Veröffentlicht: (2024)

Numerical simulation of damage under thermal effect in drilling CFRP
von: Chen Chen, et al.
Veröffentlicht: (2024)

Optimization Forming Process of CFRP I ‐Shaped Stiffened Panel
von: Yuan Xie, et al.
Veröffentlicht: (2026)

Thin porous Ni‐foam enhanced CFRP/Al adhesive joint inserted by ultrasonic vibration
von: Zhengwu Zhou, et al.
Veröffentlicht: (2024)

Enhancing mechanical properties of CFRP with oriented nickel plated short carbon fibers in a magnetic field
von: Jiyong Liang, et al.
Veröffentlicht: (2024)

Extreme temperature influence on low velocity impact damage and residual flexural properties of CFRP
von: Irene Bavasso, et al.
Veröffentlicht: (2024)

Damage evolution and failure mechanism of carbon fiber wound composite tubes under lateral compression
von: Tong‐yu Zhang, et al.
Veröffentlicht: (2025)

Low energy impact damage characteristics of epoxy coating on the surface of sandwich composites
von: Caixia Jia, et al.
Veröffentlicht: (2024)

Study on the Effects of Pre‐Curing and Compression Molding Techniques on the Forming Quality and Mechanical Properties of U‐Shaped Al/ CFRP Hybrid Laminate Parts
von: Yongqian He, et al.
Veröffentlicht: (2026)

Experimental investigations into damage mechanism in the low‐velocity impact and tension‐after‐impact testing of z‐pin reinforced curved CFRP composite
von: Weiwei Liu, et al.
Veröffentlicht: (2024)

Experimental evaluation of residual tensile properties of CFRP‐aluminum butt adhesive joints subjected to systematic creep damage
von: Hamed Saeidi Googarchin, et al.
Veröffentlicht: (2025)

Towards developing advanced CFRP with simultaneously enhanced fracture toughness and in‐plane properties via interleaving CNT/PEI hybrid veils
von: Yiting Weng, et al.
Veröffentlicht: (2024)

Failure analysis of blind riveted CFRP /steel hybrid joints with different rivet diameters and simplified modeling considering failure behavior
von: Chao Wang, et al.
Veröffentlicht: (2025)