Buchumschlag

A comprehensive investigation on tensile behavior of surface‐modified Kevlar hybrid nanocomposites for similar and dissimilar joints

Fuente: Wiley Open Access

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Ramasamy Nallamuthu, Arumugam Vellayaraj, Suresh Kumar Chelliah, Prabhu Bose, Arunkumar Thirugnanasamabandam
Format:	Artículo Open Access
Veröffentlicht:	Wiley 2024
Schlagworte:	Polymer Composites
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

Influence of alumina and PMMA on mechanical properties and aging behavior of 3D printed PLA composites: A comparative study
von: Ramasamy Nallamuthu, et al.
Veröffentlicht: (2024)

A novel approach to enhance the mechanical behavior of glass epoxy laminates with sustainable recycled milled fillers
von: Indhumathi Elango, et al.
Veröffentlicht: (2024)

Assessment of Fatigue Crack Growth in Aluminum Bonded With a Nanoparticle Reinforced Composite Patch
von: Balaji Rajendran, et al.
Veröffentlicht: (2025)

Temperature effects on tensile and bending properties of carbon/Kevlar hybrid fiber sandwich composites
von: Miao Chen, et al.
Veröffentlicht: (2024)

Study of tensile‐tensile fatigue behavior of patch repaired carbon‐glass hybrid composite
von: Chinmaya Kumar Sahoo, et al.
Veröffentlicht: (2024)

Experimental and numerical investigation on the tensile performances of bonded/bolted hybrid CFRP‐AL joints
von: Wenlong Mu, et al.
Veröffentlicht: (2025)

Assessment of geometric parameters on the tensile behavior of hybrid (rivet‐adhesive) aluminum‐composite joints
von: Alireza Nourmohammadi, et al.
Veröffentlicht: (2025)

Effectiveness of multi‐walled carbon nanotube on the improvement of tensile, flexural, and low‐velocity impact properties of hybrid Kevlar/carbon fiber reinforced epoxy‐based composites
von: Bahjat Hardan Sulaiman, et al.
Veröffentlicht: (2024)

Comparative fracture surface analysis of adhesively bonded dissimilar lap joints: Nanosilica effect
von: Shahram A. Dizaji, et al.
Veröffentlicht: (2024)

Comparison of the tensile and flexural properties of epoxy nanocomposites reinforced by graphene oxide and reduced graphene oxide
von: Amit Kumar, et al.
Veröffentlicht: (2025)

Simulation of tensile strength for polymer hydroxyapatite nanocomposites by interphase and nanofiller dimensions
von: Mohadeseh Farajifard, et al.
Veröffentlicht: (2024)

Experimental and numerical studies on quasi‐static behavior of sandwich composites with nano clay modified Kevlar facesheets and aluminum honeycomb core
von: Seyed Soroush Soleimani, et al.
Veröffentlicht: (2024)

The impact of boron carbide in soft and hard body armor: A comprehensive evaluation on Kevlar and UHMWPE fabrics
von: Ramzi Makaoui, et al.
Veröffentlicht: (2024)

Fatigue resistance and fracture toughness improvement in nanoclay‐modified Titanium‐Kevlar/Jute fiber metal laminate
von: Michael Roger Naveen, et al.
Veröffentlicht: (2025)

Experimental investigation of the compressive behavior of epoxy nanocomposites reinforced with straight and helical carbon nanotubes
von: Soroush Saririan, et al.
Veröffentlicht: (2024)

Study on the tensile failure mechanisms of CFRP‐Al flat‐joggle‐flat bonded joints
von: Gao QingXin, et al.
Veröffentlicht: (2024)

Lightweight three‐dimensional woven Kevlar/glass hybrid composites with enhanced mechanical, dielectric, and thermal insulation properties
von: Liangang Zheng, et al.
Veröffentlicht: (2024)

Investigation on delamination behavior of additively manufactured Kevlar and carbon composites subjected to Mode‐II loading conditions
von: Kuldeep Yadav, et al.
Veröffentlicht: (2025)

Effect of nanofibril cellulose empty fruit bunch‐reinforced thermoplastic polyurethane nanocomposites on tensile and dynamic mechanical properties for flexible substrates
von: N. A. Azzra, et al.
Veröffentlicht: (2024)

Theoretical and experimental modal analysis of polymeric hybrid lap joint structure with and without damage
von: Dhananjay Kumar, et al.
Veröffentlicht: (2025)

Experimental evaluation of residual tensile properties of CFRP‐aluminum butt adhesive joints subjected to systematic creep damage
von: Hamed Saeidi Googarchin, et al.
Veröffentlicht: (2025)

Characterization of damage behavior and failure mechanisms of the bonded‐bolted hybrid three‐bolt joint in composite laminates
von: Kunlong Zhang, et al.
Veröffentlicht: (2024)

Tensile behavior of mechanical joint for GFRP/metal mesh hybrid laminate after low‐velocity impact
von: Yilong Chen, et al.
Veröffentlicht: (2025)

Evaluating the structural parameter on the forming quality and tensile property of CFRP bolted joints with one‐sided connected rivet nut
von: Jian Wang, et al.
Veröffentlicht: (2025)

Effect of Harsh Aging Conditions on Static and Fatigue Performance of Hybrid Jute‐Kevlar Composite‐to‐Aluminum Bolted/Bonded/ HBB Joints
von: Alok Behera, et al.
Veröffentlicht: (2025)

Hybrid glass/Kevlar fiber reinforced phenolic matrix composites: Thermal degradation and flammability studies
von: Senthilkumar Krishnasamy, et al.
Veröffentlicht: (2024)

Evaluation of the off‐axis and on‐axis tensile creep behavior of glass‐fiber reinforced polymer unidirectional lamina
von: Qinglin Gao, et al.
Veröffentlicht: (2024)

Failure analysis of blind riveted CFRP /steel hybrid joints with different rivet diameters and simplified modeling considering failure behavior
von: Chao Wang, et al.
Veröffentlicht: (2025)

Enhancing damage resistance in tubular triaxial hybrid braided composites: Innovative production and tensile modulus prediction with damage analysis
von: Ghazal Ghamkhar, et al.
Veröffentlicht: (2024)

Impact on mechanical and thermal characteristics of epoxy nanocomposites by waste derived carbon nanotubes, carbon black, and hybrid CNT/FCB reinforcing materials
von: Parul Dwivedi, et al.
Veröffentlicht: (2024)

Effects of off‐axis load direction on tensile properties of pultruded fiber‐reinforced polymer bolted joints with multi‐directional fiber lay‐ups
von: Mengdie Liang, et al.
Veröffentlicht: (2024)

Progressive damage and stiffness degradation assessments of double‐lap CFRP /Ti interference fit bolted joints under quasi‐static tensile load
von: Yangjie Zuo, et al.
Veröffentlicht: (2024)

Development of hybrid green composites by dual natural fibers (jute/bamboo) reinforcement and investigation of their mechanical behavior
von: Haftamu Abraha Guangul, et al.
Veröffentlicht: (2024)

Quantitative investigation on ballistic resistance and energy absorption behavior of columnar ceramic/interlayer hybrid fiber composites
von: Yang Jiang, et al.
Veröffentlicht: (2024)

Correlation between interfacial bonding behavior and surface treatments in bonded carbon fiber composite joints
von: Tingting Wang, et al.
Veröffentlicht: (2025)

The effect of hybridization and stainless steel mesh on the post‐impact performance of needle punched banana/pineapple/unsaturated polyester composites
von: R. Karthikeyan, et al.
Veröffentlicht: (2024)

Post‐Thermal Strength of Basalt and Kevlar Phenolic Composites: A Weibull Reliability Approach
von: Husam A. R. Husam, et al.
Veröffentlicht: (2025)

Toughening of Intraply Carbon/Kevlar Hybrids With Nanosilica and Nanoclay: Mode‐I and Shear Behavior
von: Mohamad Alsaadi, et al.
Veröffentlicht: (2026)

Utilizing multicriteria decision‐making approach for material selection in hybrid polymer nanocomposites for energy‐harvesting applications
von: Nikhil Dilip Kulkarni, et al.
Veröffentlicht: (2024)

Laser Induced Graphene for EMI Shielding and Damage Detection in Kevlar/Basalt Hybrid Composite Laminates
von: Weifu Sun, et al.
Veröffentlicht: (2025)