Buchumschlag

Bio‐based PA56/GO nanocomposite fiber with 1.2 GPa strength via in situ precipitation and solvent‐free polymerization

Fuente: Wiley Open Access

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Zhongjiang Wang, Hao Zhu, Pengmin Fan, Jian Wu, Liangyong Chu, Ningzhong Bao
Format:	Artículo Open Access
Veröffentlicht:	Wiley 2024
Schlagworte:	Polymer Composites
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

Insight into the mechanical properties and thermal expansion behavior of epoxy nanocomposites reinforced with multi‐walled carbon nanotube solvent‐free nanofluids
von: Zhongjie He, et al.
Veröffentlicht: (2024)

Enhanced mechanical, electrical, thermal, and optical properties of poly(methyl methacrylate)/copper oxide nanocomposites for flexible optoelectronic devices via in‐situ polymerization technique
von: R. Anju, et al.
Veröffentlicht: (2024)

In situ creation of aramid fiber surface coating with polymerizable deep eutectic solvents and their interfacial bonding properties with rubber
von: Hui Xu, et al.
Veröffentlicht: (2024)

Introduction of oxygen‐containing functional groups to carbon fiber surfaces to enhance the bending strength of PA6 ‐based carbon‐fiber‐reinforced thermoplastics
von: Sulchan Kim, et al.
Veröffentlicht: (2025)

Thermoplastic bicomponent‐fibers for organosheets via inline polymerization
von: Lea Senneka, et al.
Veröffentlicht: (2024)

Process optimization of continuous aramid fiber reinforced PA12 filaments and printed composites
von: Xibin Jiang, et al.
Veröffentlicht: (2024)

Breakdown field strength and corona resistance of SiTiB/EP nanocomposites
von: Boxuan Wang, et al.
Veröffentlicht: (2025)

Research on toughening of in situ polymerized polyacrylate resin for liquid composite molding
von: Kang Zhu, et al.
Veröffentlicht: (2024)

Simulation of tensile strength for polymer hydroxyapatite nanocomposites by interphase and nanofiller dimensions
von: Mohadeseh Farajifard, et al.
Veröffentlicht: (2024)

Electrophoretic deposition of “ PEDOT / GO ‐ CF ” nanostructures for improving mechanical properties and in‐situ damage detection of unidirectional carbon fiber fabric reinforced composites
von: Weibo Zhou, et al.
Veröffentlicht: (2025)

Flocculation potential regulation to achieve the improved thermal‐mechanical performance for CB/GO reinforced NR nanocomposites
von: Jiaqi Chen, et al.
Veröffentlicht: (2024)

New stable waterborne amorphous polylactic acid/organoclay nanocomposites prepared using emulsification solvent evaporation method
von: Chenni Abdenour, et al.
Veröffentlicht: (2024)

High‐strength, recyclable and healable polyurea/aramid fiber elastomeric composites
von: YingBo Wang, et al.
Veröffentlicht: (2024)

Preparation of h‐BN/PMMA composites by in situ polymerization and research on their structure and properties
von: Lulu Wu, et al.
Veröffentlicht: (2024)

In‐situ polymerization modified calcium sulfate whiskers and their application in PP composites research
von: Xuan Gao, et al.
Veröffentlicht: (2024)

Ionic Liquid as Plasticizer and Liquid Conductive Filler for Polypropylene‐Based Composite Bipolar Plates
von: Keke Ma, et al.
Veröffentlicht: (2025)

A comprehensive review on the machining and joining characteristics of natural fiber‐reinforced polymeric composites
von: Midhun Varma, et al.
Veröffentlicht: (2024)

Research progress on bamboo fiber reinforced polymeric composites: Processes, properties, and future directions
von: He Yu, et al.
Veröffentlicht: (2024)

Improved fracture toughness of glass fibers reinforced polypropylene composites through hybridization with polyolefin elastomers and polymeric fibers for automotive applications
von: Faisal A. AlSuhaibani, et al.
Veröffentlicht: (2024)

Enhancing Z‐direction strength of 3D‐printed polylactide by embedding continuous carbon fibers
von: Wei Xiong, et al.
Veröffentlicht: (2025)

Bio‐based epoxidized natural rubber nanocomposites for high‐performance tire tread applications
von: Luan Zhao, et al.
Veröffentlicht: (2024)

Polypropylene nanocomposites produced by in‐situ grafting of maleic anhydride using different mixing procedures
von: Julie Merchán Sandoval, et al.
Veröffentlicht: (2024)

Microscopic‐to‐macroscopic finite element analysis for predicting polymer‐graphene nanocomposite laminate mechanical strength
von: Bryant Grove, et al.
Veröffentlicht: (2025)

Design and development of low‐weight and high‐strength electromagnetic shielding nanocomposite in a microwave frequency range
von: Rajnish P. Modanwal, et al.
Veröffentlicht: (2024)

Interlaminar toughening of carbon fiber/epoxy composites via interleaving co‐polyamide (Co‐ PA ) veils
von: Moh Tajaldin Moh Alshrif, et al.
Veröffentlicht: (2024)

The role of photo‐catalytically synthesized poly (N‐vinyl pyrrolidone‐methyl methacrylate)/CuO‐rGO nanocomposite as a filler for the reinforcement for epoxy system
von: Ramya Rajan, et al.
Veröffentlicht: (2024)

Preparation and properties of toughened/flame‐retardant PA6/glass‐fiber composites reinforced by linear polyphosphazene elastomers
von: Wenqi Zou, et al.
Veröffentlicht: (2024)

Enhancing the mechanical, conductive, and chemical resistance properties of SEBS nanocomposites using graphene nanoplatelets
von: Shuangshan Li, et al.
Veröffentlicht: (2025)

Development of high‐strength carbon fiber/thermoplastic epoxy resin composites and it's recyclability
von: Yanqing Heng, et al.
Veröffentlicht: (2024)

Utilizing almond shell filler to improve strength and sustainability of jute fiber composites
von: Ahmet Çetin
Veröffentlicht: (2024)

Ultra‐strong and biodegradable nanocomposite fibers of poly(butylene adipate‐co‐terephthalate)/cellulose nanocrystal prepared by dry‐jet wet spinning
von: Youngeun Lee, et al.
Veröffentlicht: (2024)

Influence of carbon fiber prepreg layup on electromagnetic interference shielding and thermal conductivity of composite
von: Ruzhe Li, et al.
Veröffentlicht: (2025)

Effect of surface treatment on interfacial shear strength of basalt fiber reinforced polypropylene composite
von: Ying‐Guo Zhou, et al.
Veröffentlicht: (2025)

Influence of thermal history and consolidation force on wedge peel strength of CF / PEEK laminates manufactured by laser‐radiated in‐situ consolidation
von: Yonglong Ma, et al.
Veröffentlicht: (2024)

Preparation of poly(lactic acid) (PLA)/poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV)/graphene oxide (GO) polymeric composites for the selective removal of lead ions (Pb(II)) in water
von: Lesia Sydney Mokoena, et al.
Veröffentlicht: (2024)

Abrasive waterjet cutting of r‐GO infused magnesium fiber metal laminates: Experimental investigations and optimization through gorilla troops algorithm
von: M. Siva Kumar, et al.
Veröffentlicht: (2024)

Effects of injection molding parameters and welding sequence on the interfacial strength of glass fiber‐reinforced polypropylene
von: Jianhua Tang, et al.
Veröffentlicht: (2025)

A novel thermoplastic material: Pre‐polymerized PMMA liquid resin and continuous glass fiber‐reinforced composite initiated by benzoyl peroxide/N,N‐dimethylaniline
von: Jing Li, et al.
Veröffentlicht: (2024)

Experimental analysis of biochar filler effects on the mechanical, water absorption, and viscoelastic properties of novel caryota fiber reinforced polymeric composites: The role of biodegradable reinforcements concentration
von: S. Muthukumarasamy, et al.
Veröffentlicht: (2025)

Bio‐Based Hyperbranched Polyurethane Sizing Agent With Self‐Catalytic Function for Improving the Mechanical Properties of Carbon Fiber/ PA6 Composites
von: Xuyang Li, et al.
Veröffentlicht: (2026)