Buchumschlag

Fracture toughness and failure behavior of CF/epoxy composites interleaved with melt‐infused PET, PEI, and PEEK film

Fuente: Wiley Open Access

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Daniel Kipkirui Too, Sanjay Kumar, Yun‐Hae Kim
Format:	Artículo Open Access
Veröffentlicht:	Wiley 2024
Schlagworte:	Polymer Composites
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

Ultrasonic welding of CF /epoxy‐ CF / PEI joints with enhanced vibration transfer efficiency and optimized welding quality
von: Jiaming Liu, et al.
Veröffentlicht: (2024)

Comparison and analysis of measurements for crystallinity of PEEK and CF/PEEK composites
von: Chunrui Lu, et al.
Veröffentlicht: (2024)

Towards developing advanced CFRP with simultaneously enhanced fracture toughness and in‐plane properties via interleaving CNT/PEI hybrid veils
von: Yiting Weng, et al.
Veröffentlicht: (2024)

Electrospun nanofiber interleaving through double infusion method to induce pseudo‐ductile damage resistance response in carbon/epoxy composites
von: Usaid Ahmed Shakil, et al.
Veröffentlicht: (2024)

Improving interlaminar fracture toughness and compression after impact strength of carbon fiber reinforced epoxy composites by interleaving electrospinning polyethersulfone nanofiber
von: Mingming Yu, et al.
Veröffentlicht: (2024)

Effects of Emulsifiers on the Thermal Stability of Thermoplastic Sizing Agents and the Interfacial Properties of CF / PEEK Composites
von: Zixuan Liu, et al.
Veröffentlicht: (2026)

Interlaminar toughening of carbon fiber/epoxy composites via interleaving co‐polyamide (Co‐ PA ) veils
von: Moh Tajaldin Moh Alshrif, et al.
Veröffentlicht: (2024)

Effect of Temperature on the Mechanical Behavior of CF / PEEK Under Different Loads
von: Gang Wei, et al.
Veröffentlicht: (2025)

Effect of Strain Rate and Loading Conditions on the Mechanical Behavior of CF / PEEK
von: Gang Wei, et al.
Veröffentlicht: (2026)

Effect of low‐pressure plasma processing parameters on the surface topography of a CF/PEEK composite for adhesive bonding
von: Chang Li, et al.
Veröffentlicht: (2024)

Mechanical response and damage evolution of CF/PEEK‐reinforced Al metal‐composite hybrid structure at high strain rate
von: Shuyan Nie, et al.
Veröffentlicht: (2024)

Laser‐Assisted AFP In Situ Consolidation of CF / PEEK : Pyrolysis Kinetics and Pyrolysis Yield
von: Jianglin Liu, et al.
Veröffentlicht: (2025)

Residual strength and failure mechanism of CF/PPS composites with delamination damage
von: Mingming Yu, et al.
Veröffentlicht: (2024)

Bio‐based semi‐aromatic waterborne PIEK‐C sizing agent to construct a robust interface for CF/PEEK composites
von: Yujia Xie, et al.
Veröffentlicht: (2024)

Ballistic performance analysis of PBO fiber‐reinforced epoxy composites through resin matrix rigidity and toughness modulation
von: Xuejiao Peng, et al.
Veröffentlicht: (2025)

Post‐curing effect on the mode I fracture toughness of the glass/epoxy laminates
von: Ali Esmaili, et al.
Veröffentlicht: (2024)

Dynamic Force Model Based on Material Removal Behavior Affected by Grinding Mode in CF / PEEK Grinding
von: Xin Yan, et al.
Veröffentlicht: (2025)

Progressive Irreversible Deterioration: Damage Accumulation and Life Prediction of CF / PEEK Composites in Cyclic Hydrothermal Environments
von: Xiao Zhang, et al.
Veröffentlicht: (2026)

The Analysis of Joint Failure Mode and Effects of Ultrasonic Welding Parameters on the Mechanical Properties of CF / PEEK Composite Joints
von: Jing Wang, et al.
Veröffentlicht: (2026)

Influence of Residual Stresses in CF / PEEK Tape and Heating Methods on Deconsolidation Behavior During the Heating Phase of Laser‐Assisted Automated Fiber Placement
von: Qiuyu Miao, et al.
Veröffentlicht: (2025)

Construction of rigid‐flexible structure in MXene‐Ni‐CF/epoxy composite to enhance electromagnetic interference shielding performance and mechanical properties
von: Hong‐mei Zuo, et al.
Veröffentlicht: (2025)

Size Effect‐Driven Dynamic Cutting Force Prediction in High‐Speed Dry Milling of Plain‐Woven CF / PEEK
von: Yang Song, et al.
Veröffentlicht: (2025)

The effects of temperature and hygrothermal aging on the properties of CF/PA6 composite and its compression failure mechanisms
von: Mingming Yu, et al.
Veröffentlicht: (2024)

Influence of thermal history and consolidation force on wedge peel strength of CF / PEEK laminates manufactured by laser‐radiated in‐situ consolidation
von: Yonglong Ma, et al.
Veröffentlicht: (2024)

A study on tribological performances of PEEK and PTFE based composites with MoS2 reinforcements
von: Soumya Ranjan Guru, et al.
Veröffentlicht: (2024)

Fracture toughness and deformation mechanism of polypropylene/styrene butadiene rubber/silicon carbide nanocomposites
von: Mohsen Hajibeigi, et al.
Veröffentlicht: (2025)

Comparison of mechanical and physical behaviors of carbon/basalt/epoxy hybrid composite rod with carbon/glass/epoxy hybrid composite rod used in ACCC conductor core
von: Pooya Parvizi, et al.
Veröffentlicht: (2024)

Simultaneously improving interfacial adhesion and toughness of carbon fiber reinforced epoxy composites by grafting polyethyleneimine on the carbon fiber surface to construct a rigid‐flexible interface
von: Guosheng Zhang, et al.
Veröffentlicht: (2024)

Study on the Interface Properties of CF / PEEK ‐Ti Fiber Metal Laminates Enhanced by Synergistic Action of Graphene Oxide and Multi‐Walled Carbon Nanotubes
von: Mingrui Liu, et al.
Veröffentlicht: (2026)

Effect of operating temperature on the mechanical behavior of 3D printed continuous carbon fiber reinforced PEEK composites for space environments
von: Haibin Tang, et al.
Veröffentlicht: (2025)

A mechanical model for predicting the thermal expansion behavior of spherical particle reinforced epoxy composites
von: Liang Peng, et al.
Veröffentlicht: (2024)

Strength and toughness: Multi‐particle synergism imparts rigid‐toughness balance to poly(ether‐ether‐ketone) composites
von: Hongyan Zhang, et al.
Veröffentlicht: (2025)

Mechanical and ballistic performance of individual and synergistic filler reinforced glass fiber epoxy composites
von: S. Dharani Kumar, et al.
Veröffentlicht: (2024)

Effect of hybrid sizings on the surface morphology, mechanical behavior of basalt fibers, and fiber/epoxy composite properties
von: Mayank Agrawal, et al.
Veröffentlicht: (2024)

Tensile and flexural behavior of graphene‐reinforced carbon/epoxy composites manufactured via compression molding method
von: Mahendra L. Shelar, et al.
Veröffentlicht: (2024)

Spring‐back of Al/ CF / PEEK parts during one‐step hot stamping forming using a CAE chain considering all process steps
von: Yan Lu, et al.
Veröffentlicht: (2024)

Effect of annealing treatment on impact toughness and crystallization behaviors of polypropylene/ethylene vinyl acetate copolymer/layered double hydroxide composites
von: Xincheng Guo, et al.
Veröffentlicht: (2024)

Cold plasma‐mediated kapok fiber/epoxy composites for printed circuit board applications
von: Ramyaranjan Das, et al.
Veröffentlicht: (2025)

Enhancement of fracture toughness of hybrid organic–inorganic polyurethane composites
von: Alok K. Srivastava, et al.
Veröffentlicht: (2025)

Effect of crystallization behavior on wear properties of polytetrafluoroethylene composites modified by irradiation above melting point
von: Xiaojie Wang, et al.
Veröffentlicht: (2024)