Buchumschlag

Multi‐objective optimization of 3D printing process parameters using gray‐based Taguchi for composite PLA parts

Fuente: Wiley Open Access

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Oğuz Tunçel, Kenan Tüfekci, Çağlar Kahya
Format:	Artículo Open Access
Veröffentlicht:	Wiley 2024
Schlagworte:	Polymer Composites
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

Optimization of 3D printed bioinspired helicoidal composites using Gaussian process regression
von: Runzhi Li, et al.
Veröffentlicht: (2024)

Influence of alumina and PMMA on mechanical properties and aging behavior of 3D printed PLA composites: A comparative study
von: Ramasamy Nallamuthu, et al.
Veröffentlicht: (2024)

Multifunctional property analysis of 3D ‐printed composite scaffolds from PLA / PCL filaments with graphene oxide reinforcement
von: Meltem Eryildiz, et al.
Veröffentlicht: (2025)

A short banana fiber— PLA filament for 3D printing: Development and characterization
von: Mohamed Shafeer P.P, et al.
Veröffentlicht: (2024)

The influence of water absorption on the mechanical performance of 3D‐printed sandwich composite structures made from PLA‐based materials under quasi‐static loading conditions
von: F. Nur Ainin, et al.
Veröffentlicht: (2024)

Chemical modification of PLA for the design of 3D printed nanocomposite scaffolds with enhanced degradability for bone tissue engineering
von: Giovanni Dal Poggetto, et al.
Veröffentlicht: (2025)

Topology optimization and continuous path strategy for 3D printed continuous fiber composite structures
von: Huimin Li, et al.
Veröffentlicht: (2025)

Experimental analysis of 3D printed continuous carbon/glass hybrid fiber reinforced PLA composites: Revealing synergistic mechanical properties and failure mechanisms
von: Yu Chen, et al.
Veröffentlicht: (2024)

Characteristics and degradability of laser print waste paper fiber reinforced PLA resin matrix composite materials
von: Xiaolin Zhang, et al.
Veröffentlicht: (2024)

Advancing additive manufacturing: 3D‐printing of hybrid natural fiber sandwich (Nona/Soy‐PLA) composites through filament extrusion and its effect on thermomechanical properties
von: A. Vinod, et al.
Veröffentlicht: (2024)

Correction to “Low‐temperature 3D printing and curing process of continuous fiber‐reinforced thermosetting polymer composites”
Veröffentlicht: (2025)

3D‐printed graphene‐reinforced composites: Opportunities and challenges
von: R. Banupriya, et al.
Veröffentlicht: (2024)

Crashworthiness design and multi‐objective optimization of 3D‐printed carbon fiber‐reinforced nylon nested tubes
von: Zhiyu Jiang, et al.
Veröffentlicht: (2024)

Nylon 12 composite optimization: Investigating influence of ceramic functional fillers on FFF 3D printing performance and rheological properties
von: Nidhin Divakaran, et al.
Veröffentlicht: (2024)

Evaluation of fatigue characteristics of 3D printed/composites reinforced with carbon fiber using design of experiments
von: Imran M. Jamadar, et al.
Veröffentlicht: (2024)

Basalt fiber reinforced polypropylene to manufacture 3D printed composites
von: Manuel Raul Pelaez‐Samaniego, et al.
Veröffentlicht: (2024)

Impact of graphite on tribo‐mechanical, structural, and thermal behaviors of polyoxymethylene copolymer/glass fiber hybrid composites via Taguchi optimization
von: Kamlendra Vikram, et al.
Veröffentlicht: (2024)

Optimizing the crashworthy behaviors of hybrid composite structures through Taguchi approach
von: Mahmoud M. Awd Allah, et al.
Veröffentlicht: (2024)

Material property characterization of 3D printed polypropylene wood plastic composites
von: Sungjun Hwang, et al.
Veröffentlicht: (2024)

Processability and properties of cubic‐BaTiO3/poly(vinylidene fluoride) composites for additive manufacturing: From powder compounding to 3D‐printed parts
von: Rocío Moriche, et al.
Veröffentlicht: (2024)

Process optimization of continuous aramid fiber reinforced PA12 filaments and printed composites
von: Xibin Jiang, et al.
Veröffentlicht: (2024)

Preparation of high‐performance bismuthene thermoelectric composites doped with graphene using UV‐curing 3D printing technology
von: Qingshi Meng, et al.
Veröffentlicht: (2024)

A new mechanism of mechanical reinforcement for 3D printing CF/PA12 composite based on microwave treatment
von: Huifang Zhang, et al.
Veröffentlicht: (2024)

Performance enhancement of 3D‐printed carbon fiber‐reinforced nylon 6 composites
von: Siyu Chen, et al.
Veröffentlicht: (2024)

Digital light processing printed resin based conductive composites with CF @Ag and HGMs @Ag as fillers for metamaterial absorbers
von: Chenyang Li, et al.
Veröffentlicht: (2024)

Three‐dimensional (3D) woven flax fiber/polylactic acid (PLA) composites for high flexural strength
von: Awoke Fenta Wodag, et al.
Veröffentlicht: (2024)

Development of graphite‐reinforced PLA / PBAT composite filaments
von: Samuel Nogueira Figueiredo, et al.
Veröffentlicht: (2025)

Evaluation of the effect of triphenyl phosphate on hemp fiber‐reinforced polycarbonate composites for 3D printing applications
von: Irem Ceylan Engin, et al.
Veröffentlicht: (2025)

The effect of fiber trajectory continuity in 3D printing on X‐band microwave absorption performance under different structural parameters
von: Ruosen Qin, et al.
Veröffentlicht: (2025)

Energy absorption of a composite sandwich panel with 3D printed unbalanced/balanced configuration morphing core
von: Mohammad Mahdi Ashrafian, et al.
Veröffentlicht: (2025)

Mechanical characterization of 3D printed multiscale carbon nanofiller/continuous fiber reinforced polymer hybrid composites
von: Jia Li, et al.
Veröffentlicht: (2025)

The role of the fiber–matrix interface in the tensile properties of short fiber–reinforced 3D‐printed polylactic acid composites
von: Csenge Tóth, et al.
Veröffentlicht: (2024)

The influence of process parameters and carbon nanotubes on composite material joints
von: Siyuan Liu, et al.
Veröffentlicht: (2024)

Micro drilling characterization of the carbon and carbon–aramid (hybrid) composites
von: Murat Sen, et al.
Veröffentlicht: (2024)

A review of 3D printing continuous carbon fiber reinforced thermoplastic polymers: Materials, processes, performance enhancement, and failure analysis
von: Yaru Zhang, et al.
Veröffentlicht: (2025)

Decentralized approach for incorporating waste wind turbine blades into 3D printing filaments using mechanical recycling
von: J. James Ezhilan, et al.
Veröffentlicht: (2024)

Comparing lignin and spent coffee grounds as bio‐fillers in PLA 3D ‐printable filaments
von: Silvia Lage‐Rivera, et al.
Veröffentlicht: (2024)

Machine learning for bending behavior of sandwich beams with 3D‐printed core and natural fiber‐reinforced composite face sheets
von: Saeed Kamarian, et al.
Veröffentlicht: (2024)

Investigation of thermo‐mechanical and viscoelastic properties of 3D ‐printed Morinda citrifolia particle reinforced poly(lactic acid) composites
von: Vinod Ayyappan, et al.
Veröffentlicht: (2024)

Comparative study on the mechanical properties of 3D printed continuous fiber reinforced composites between two‐matrix and single‐matrix
von: Chuankun Wei, et al.
Veröffentlicht: (2025)