Impact of graphene oxide lateral sizes on the mechanical and thermal properties of carbon fiber composites
Fuente:
Wiley Open Access
Gespeichert in:
| Hauptverfasser: | Jiajun Ma, Shengtao Dai, Zongwei Guo, Lei Shang, Yuhui Ao, Lin Jin |
|---|---|
| Format: | Artículo Open Access |
| Veröffentlicht: |
Wiley
2024
|
| Schlagworte: | |
| Online-Zugang: | |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Ähnliche Einträge
2D/0D multiscale interfacial engineering of carbon fiber composites for simultaneous achieving high mechanical and electromagnetic interference shielding properties
von: Zongwei Guo, et al.
Veröffentlicht: (2024)
von: Zongwei Guo, et al.
Veröffentlicht: (2024)
Biomimetic mineralization of silicon dioxide onto carbon fiber for elevated interfacial properties and hydrothermal aging resistance of carbon fiber/epoxy composites
von: Fei Yan, et al.
Veröffentlicht: (2024)
von: Fei Yan, et al.
Veröffentlicht: (2024)
Enhancing interfacial solvent resistance and mechanical properties of carbon fiber/polyether ether ketone composites with water‐borne sizing agents based on cross‐linkable polyphthalonitrile
von: Weibing Pei, et al.
Veröffentlicht: (2024)
von: Weibing Pei, et al.
Veröffentlicht: (2024)
Synthesis of multicomponent boron nitride/carbon nanotube conjugated hybrid composite nanosol aqueous sizing agent to improve mechanical properties and thermal conductivity of carbon fiber composites
von: Yunhuan Wu, et al.
Veröffentlicht: (2024)
von: Yunhuan Wu, et al.
Veröffentlicht: (2024)
Effect and mechanism of thermal aging on mechanical properties of continuous carbon fiber‐reinforced PEEK composite laminates
von: Xiaolong Ma, et al.
Veröffentlicht: (2024)
von: Xiaolong Ma, et al.
Veröffentlicht: (2024)
Construction of “hard‐soft‐hard” structures with ammonium cerium nitrate/sodium alginate/carbon nanotubes on carbon fiber surfaces for superior mechanical
von: Yunhuan Wu, et al.
Veröffentlicht: (2024)
von: Yunhuan Wu, et al.
Veröffentlicht: (2024)
Enhanced mechanical performance of carbon fiber reinforced polymer composites by interface modification with self‐assembled γ‐ Al 2 O 3 nanosheet/graphene
von: Rong Liu, et al.
Veröffentlicht: (2024)
von: Rong Liu, et al.
Veröffentlicht: (2024)
The effect of graphene oxide on thermal, electrical, and mechanical properties of carbon/epoxy composites: Towards multifunctional composite material
von: B. Pramodkumar, et al.
Veröffentlicht: (2024)
von: B. Pramodkumar, et al.
Veröffentlicht: (2024)
Study on recycled carbon fiber obtained by thermal activated oxide semiconductor and mechanical properties of its reinforced polymer composites
von: Huanbo Cheng, et al.
Veröffentlicht: (2024)
von: Huanbo Cheng, et al.
Veröffentlicht: (2024)
Enhanced mechanical, thermal properties and thermal conductivities of epoxy composites via incorporating graphene oxide‐grafted carbon nanotubes hybrids
von: Song Liu, et al.
Veröffentlicht: (2024)
von: Song Liu, et al.
Veröffentlicht: (2024)
The influence of the distribution angle of graphene oxide on the mechanical properties and non‐reciprocity of composites
von: Zhangwei Xia, et al.
Veröffentlicht: (2024)
von: Zhangwei Xia, et al.
Veröffentlicht: (2024)
The static and dynamic mechanical properties analysis of ramie/carbon fiber‐reinforced composites
von: Jiwei Liu, et al.
Veröffentlicht: (2024)
von: Jiwei Liu, et al.
Veröffentlicht: (2024)
Damage evolution and failure mechanism of carbon fiber wound composite tubes under lateral compression
von: Tong‐yu Zhang, et al.
Veröffentlicht: (2025)
von: Tong‐yu Zhang, et al.
Veröffentlicht: (2025)
CaO ‐catalyzed simplified synthesis of fully bio‐based self‐cross‐linkable MB ‐ polyether ether ketone toward waterborne carbon fiber sizing agent to enhance the interfacial properties and solvent‐resistance of carbon fiber/polyether ether ketone composites
von: Jiaming Guo, et al.
Veröffentlicht: (2024)
von: Jiaming Guo, et al.
Veröffentlicht: (2024)
Impact of different matrix systems on mechanical, thermal, and electrical properties of carbon fiber reinforced epoxy resin matrix composites
von: Dan Wang, et al.
Veröffentlicht: (2024)
von: Dan Wang, et al.
Veröffentlicht: (2024)
Improvement of interfacial adhesion of aramid fiber/polycarbonate composites by surface modification with graphene oxide modified sizing agents
von: Peng Zhang, et al.
Veröffentlicht: (2024)
von: Peng Zhang, et al.
Veröffentlicht: (2024)
Electrophoretic deposition of “ PEDOT / GO ‐ CF ” nanostructures for improving mechanical properties and in‐situ damage detection of unidirectional carbon fiber fabric reinforced composites
von: Weibo Zhou, et al.
Veröffentlicht: (2025)
von: Weibo Zhou, et al.
Veröffentlicht: (2025)
Using a novel side‐chain liquid crystalline polymer as the surfactant and dispersing agent of graphene oxide for the improvement of thermal and mechanical properties of epoxy nanocomposites
von: Tian Guo, et al.
Veröffentlicht: (2025)
von: Tian Guo, et al.
Veröffentlicht: (2025)
Influence of fiber volume ratio on hybrid effects of pultruded aramid/carbon hybrid fiber reinforced polymer composite bars: Static mechanical properties
von: Xiaogang Liu, et al.
Veröffentlicht: (2025)
von: Xiaogang Liu, et al.
Veröffentlicht: (2025)
Construction of 3D nanostructures on carbon fiber surfaces by sizing for preparing high‐performance composites
von: Weiwen Li, et al.
Veröffentlicht: (2024)
von: Weiwen Li, et al.
Veröffentlicht: (2024)
The influence of sizing treatment on the mechanical and morphological properties of carbon fiber reinforced polyphenylene sulfide composites
von: Junjie Liu, et al.
Veröffentlicht: (2024)
von: Junjie Liu, et al.
Veröffentlicht: (2024)
Orientation control of magnetically functionalized graphene oxide nanohybrids in unsaturated polyester resin with enhanced mechanical, thermal, and fire safety performance
von: Tao Tang, et al.
Veröffentlicht: (2024)
von: Tao Tang, et al.
Veröffentlicht: (2024)
Improvement of thermal conductivity and damping properties of rubber composite with modified graphene oxide and carbon nanotube prepared by a facile method
von: Huanhuan Dong, et al.
Veröffentlicht: (2025)
von: Huanhuan Dong, et al.
Veröffentlicht: (2025)
Comprehensive research on the correlation between microstructure and mechanical properties of polyacrylonitrile‐based precursor fibers prepared by wet‐spinning
von: Yong Liu, et al.
Veröffentlicht: (2024)
von: Yong Liu, et al.
Veröffentlicht: (2024)
Dielectric properties of functionalized natural fiber reinforced electromagnetic composite with reduced graphene oxide nanofiller for microwave absorption
von: Biswabandita Samantara, et al.
Veröffentlicht: (2025)
von: Biswabandita Samantara, et al.
Veröffentlicht: (2025)
Improving mechanical and tribological properties of carbon fabric/resin laminated composites by carbon fiber powder
von: Jifeng Yan, et al.
Veröffentlicht: (2024)
von: Jifeng Yan, et al.
Veröffentlicht: (2024)
Effect of temperature and moisture composite environments on the mechanical properties and mechanisms of woven carbon fiber composites
von: Jingsong Chen, et al.
Veröffentlicht: (2024)
von: Jingsong Chen, et al.
Veröffentlicht: (2024)
High‐performance PPS/PEEK blend and its composites with milled carbon fiber: Study on their mechanical, thermal and dielectric properties
von: Shilpi Tiwari, et al.
Veröffentlicht: (2024)
von: Shilpi Tiwari, et al.
Veröffentlicht: (2024)
Effect of hybrid sizings on the surface morphology, mechanical behavior of basalt fibers, and fiber/epoxy composite properties
von: Mayank Agrawal, et al.
Veröffentlicht: (2024)
von: Mayank Agrawal, et al.
Veröffentlicht: (2024)
Enhanced mechanical property and flame retardancy of halogen‐free PE / EVA composites through crosslinking and carbon fiber inclusion
von: Ao Du, et al.
Veröffentlicht: (2024)
von: Ao Du, et al.
Veröffentlicht: (2024)
Hygrothermal aging and recycling effects on mechanical and thermal properties of recyclable thermoplastic glass fiber composites
von: Vishal Kumar, et al.
Veröffentlicht: (2024)
von: Vishal Kumar, et al.
Veröffentlicht: (2024)
Effective interlaminar toughening of carbon fiber/epoxy composite laminates by extremely low loadings of monolayer graphene oxide
von: Chongyang Gao, et al.
Veröffentlicht: (2024)
von: Chongyang Gao, et al.
Veröffentlicht: (2024)
Enhanced mechanical and interfacial performances of carbon fiber reinforced composites with low percentage of amine functionalized graphene
von: Debendra Nath Choudhury, et al.
Veröffentlicht: (2024)
von: Debendra Nath Choudhury, et al.
Veröffentlicht: (2024)
Effect of fiber surface treatment with silane coupling agents and carbon nanotubes on mechanical properties of carbon fiber reinforced polyamide 6 composites
von: Haoqiang Du, et al.
Veröffentlicht: (2024)
von: Haoqiang Du, et al.
Veröffentlicht: (2024)
Mechanical property and thermal stability of short carbon fiber reinforced polysulfonamide composites
von: ZeChao Chen, et al.
Veröffentlicht: (2024)
von: ZeChao Chen, et al.
Veröffentlicht: (2024)
Exploring the impact of novel ionic liquid functionalized graphene on the mechanical properties and thermal conductivity of LLDPE composites
von: Jinzhuo Zhang, et al.
Veröffentlicht: (2024)
von: Jinzhuo Zhang, et al.
Veröffentlicht: (2024)
Effects of surface modification on mechanical properties and electromagnetic interference shielding properties of carbon fiber/silk fiber hybrid composites
von: Hanlin Song, et al.
Veröffentlicht: (2024)
von: Hanlin Song, et al.
Veröffentlicht: (2024)
Multiscale analysis of the mechanical properties and interface damage mechanisms of carbon fiber reinforced polypropylene composites
von: Tian Qiu, et al.
Veröffentlicht: (2025)
von: Tian Qiu, et al.
Veröffentlicht: (2025)
Impact of molybdenum disulfide diffused coir fiber on the physical, mechanical, thermal, and vibrational characteristics of polyester composites
von: Unnikrishnan Thekkeparambil Gopalaswamy Pillai, et al.
Veröffentlicht: (2024)
von: Unnikrishnan Thekkeparambil Gopalaswamy Pillai, et al.
Veröffentlicht: (2024)
Enhancement in mechanical properties of GFRP‐coal‐derived graphene oxide composites by addition of multiwalled carbon nanotubes and halloysite nanotubes: A comparative study
von: Anushka Garg, et al.
Veröffentlicht: (2024)
von: Anushka Garg, et al.
Veröffentlicht: (2024)
Ähnliche Einträge
-
2D/0D multiscale interfacial engineering of carbon fiber composites for simultaneous achieving high mechanical and electromagnetic interference shielding properties
von: Zongwei Guo, et al.
Veröffentlicht: (2024) -
Biomimetic mineralization of silicon dioxide onto carbon fiber for elevated interfacial properties and hydrothermal aging resistance of carbon fiber/epoxy composites
von: Fei Yan, et al.
Veröffentlicht: (2024) -
Enhancing interfacial solvent resistance and mechanical properties of carbon fiber/polyether ether ketone composites with water‐borne sizing agents based on cross‐linkable polyphthalonitrile
von: Weibing Pei, et al.
Veröffentlicht: (2024) -
Synthesis of multicomponent boron nitride/carbon nanotube conjugated hybrid composite nanosol aqueous sizing agent to improve mechanical properties and thermal conductivity of carbon fiber composites
von: Yunhuan Wu, et al.
Veröffentlicht: (2024) -
Effect and mechanism of thermal aging on mechanical properties of continuous carbon fiber‐reinforced PEEK composite laminates
von: Xiaolong Ma, et al.
Veröffentlicht: (2024)