Buchumschlag

Integrating machine learning and digital twin for strength prediction of CFRP/aluminum adhesive joints under hygrothermal conditions

Fuente: Wiley Open Access

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Noor Hadi Aysa, Sajjad Karimi
Format:	Artículo Open Access
Veröffentlicht:	Wiley 2025
Schlagworte:	Polymer Composites
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

Utilizing a combination of experimental and machine learning methods to predict and correlate between accelerated and natural aging of CFRP/AL adhesive joints under hygrothermal conditions
von: Sajjad Karimi, et al.
Veröffentlicht: (2024)

Experimental evaluation of residual tensile properties of CFRP‐aluminum butt adhesive joints subjected to systematic creep damage
von: Hamed Saeidi Googarchin, et al.
Veröffentlicht: (2025)

Performance optimization and reliability analysis of CFRP adhesive‐rivet hybrid joint
von: Hailiang Su, et al.
Veröffentlicht: (2025)

Bending characteristics of partially reinforced aluminum/CFRP hybrid hat‐section beam structures with an adhesively bonded joint: An experimental, numerical, and analytical study
von: Hamed Hampaiyan Miandowab, et al.
Veröffentlicht: (2024)

The development of advanced low‐melt polyaryl‐ether‐ketone ( LM ‐ PAEK ) composite adhesive joints with good hygrothermal and chemical resistance
von: Yannan Ma, et al.
Veröffentlicht: (2025)

Thin porous Ni‐foam enhanced CFRP/Al adhesive joint inserted by ultrasonic vibration
von: Zhengwu Zhou, et al.
Veröffentlicht: (2024)

Assessment of geometric parameters on the tensile behavior of hybrid (rivet‐adhesive) aluminum‐composite joints
von: Alireza Nourmohammadi, et al.
Veröffentlicht: (2025)

Micromechanics‐based theoretical modeling and analysis of temperature and moisture‐dependent tensile strength of fiber‐reinforced polymer composites at hygrothermal conditions
von: Ying Li, et al.
Veröffentlicht: (2024)

A new platform for designing high‐performance epoxy film adhesive with poly (butyl acrylate‐block‐styrene) block copolymer and alumina nano particles in aluminum–aluminum bonded joints: Preparation and analysis of the mechanical, adhesion, and thermal properties
von: Hamid Ghaderi, et al.
Veröffentlicht: (2024)

Data‐driven machine learning regression methods to predict the residual strength in FRP composites subjected to fatigue
von: Anand Gaurav
Veröffentlicht: (2025)

Investigation on interlayer debonding behavior of unidirectional composite laminates under cyclical hygrothermal aging duration effects
von: Shengping Zhang, et al.
Veröffentlicht: (2024)

Experimental and numerical investigation on the tensile performances of bonded/bolted hybrid CFRP‐AL joints
von: Wenlong Mu, et al.
Veröffentlicht: (2025)

Study on the tensile failure mechanisms of CFRP‐Al flat‐joggle‐flat bonded joints
von: Gao QingXin, et al.
Veröffentlicht: (2024)

Effects of structural parameters on the load distribution unevenness in CFRP hybrid bonded‐bolted joint
von: Jianwei Shi, et al.
Veröffentlicht: (2024)

Effect of hygrothermal aging on mechanical properties of continuous flax fiber composites
von: Wenlong Mu, et al.
Veröffentlicht: (2024)

Energy absorption properties of filament wound aluminum/ CFRP hybrid tubes: Axial, lateral, and bending loadings
von: Mehmet Murat Demir, et al.
Veröffentlicht: (2025)

The effect of hole‐making process on the performance of CFRP/Ti multi‐bolt joints and load distribution
von: Chenguang Wang, et al.
Veröffentlicht: (2024)

Progressive damage and stiffness degradation assessments of double‐lap CFRP /Ti interference fit bolted joints under quasi‐static tensile load
von: Yangjie Zuo, et al.
Veröffentlicht: (2024)

High strength and high damping CFRP composites with co‐curing viscoelastic sandwich film
von: Changsheng Zheng, et al.
Veröffentlicht: (2024)

Secondary bonded and co‐bonded CFRP composite joints with innovative lamination technique: Flexural and failure analysis
von: N. Karthikeyan, et al.
Veröffentlicht: (2025)

Effect of electromagnetic force installation method on critically reinforced interference sizes and fatigue behavior of CFRP bolted joints
von: Xiaohe Wang, et al.
Veröffentlicht: (2024)

Numerical simulation of damage under thermal effect in drilling CFRP
von: Chen Chen, et al.
Veröffentlicht: (2024)

Evaluating the structural parameter on the forming quality and tensile property of CFRP bolted joints with one‐sided connected rivet nut
von: Jian Wang, et al.
Veröffentlicht: (2025)

An intelligent CFRP bolt with embedded carbon nanotube eddy current sensors for damage self‐diagnosis of bolted composite joints
von: Jun Hou, et al.
Veröffentlicht: (2024)

Comparative fracture surface analysis of adhesively bonded dissimilar lap joints: Nanosilica effect
von: Shahram A. Dizaji, et al.
Veröffentlicht: (2024)

Effect of high temperature and hygrothermal aging on interlaminar mechanical properties of carbon fiber reinforced plastics
von: Feng Li, et al.
Veröffentlicht: (2025)

Multiscale simulation of hygrothermal stress and mechanical properties degradation of carbon fiber reinforced polymers laminates
von: Haiyan Yu, et al.
Veröffentlicht: (2024)

Failure analysis of blind riveted CFRP /steel hybrid joints with different rivet diameters and simplified modeling considering failure behavior
von: Chao Wang, et al.
Veröffentlicht: (2025)

Development of machine learning models for the prediction of erosion wear of hybrid composites
von: Sourav Kumar Mahapatra, et al.
Veröffentlicht: (2024)

Shear properties and failure mechanisms of adhesive bonded composite joint: Effect of glass particle reinforcement
von: Sekar Balaji, et al.
Veröffentlicht: (2024)

The effects of temperature and hygrothermal aging on the properties of CF/PA6 composite and its compression failure mechanisms
von: Mingming Yu, et al.
Veröffentlicht: (2024)

Study on the impact resistance of bio‐inspired Bouligand‐type CFRP under repeated impacts
von: Wenkai Yan, et al.
Veröffentlicht: (2025)

Integrating response surface methodology and machine learning for analyzing the unconventional machining properties of hybrid fiber‐reinforced composites
von: V. Vinoth, et al.
Veröffentlicht: (2024)

Damage failure analysis of CFRP / Al composite multi‐cell tubes under multiple loads
von: Shuhui Zhang, et al.
Veröffentlicht: (2025)

Comprehensive evaluation of energy absorption characteristics of Al‐CFRP hybrid tube under radial impacts
von: Qihua Ma, et al.
Veröffentlicht: (2024)

Geometry accuracy control in abrasive water jet taper hole machining of ultra‐thick carbon fiber‐reinforced polymer ( CFRP) laminates
von: Wei Liang, et al.
Veröffentlicht: (2024)

An inclusive study on hygrothermal aging effects on tribological and physical properties of E‐glass fiber reinforced interpenetrating polymer networks (IPNs) composites
von: M. Naveen Kumar, et al.
Veröffentlicht: (2025)

Evaluation of material properties and vibration analysis of a co‐cure single‐lap composite plate joint with graphene‐reinforced adhesive
von: Anandhan Venugopal, et al.
Veröffentlicht: (2025)

Low velocity impact resistance of hybrid CFRP ‐elastomer‐metal laminates: Influence of stacking sequence and impact conditions on damage mechanisms
von: Zhongyu Li, et al.
Veröffentlicht: (2024)

Flexural properties and evaluation of Al‐CFRP self‐pierce riveted laminates under three‐point bending loads
von: Yazhe Wang, et al.
Veröffentlicht: (2024)