Buchumschlag

The Effect of Printing Temperature on the Fused Granular Fabrication Property of Flax/ PP Agro‐Composites at Microscale

Fuente: Wiley Open Access

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Wang Baoxing, Adragna Pierre‐Antoine, Montay Guillaume
Format:	Artículo Open Access
Veröffentlicht:	Wiley 2025
Schlagworte:	Polymer Composites
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

Effects of Temperature and Hybrid Ratio on Mechanical Properties of Flax/Basalt Weft‐Knitted PLA Composites
von: Yiran Han, et al.
Veröffentlicht: (2026)

Enhancing the Mechanical Properties and Forming Efficiency of Fused Granular Fabricated PETG ‐ CF Composites via Process Optimization and Heat Treatment
von: Baolin Liu, et al.
Veröffentlicht: (2025)

Fused Granular Fabrication of CF / PPS / PES Composites: Achieving Superior Interlayer Bonding and Mechanical Strength
von: Zhaozhu Yu, et al.
Veröffentlicht: (2026)

Effect of Glass‐Flax Hybridization on the Tensile, Bending and Charpy Impact Properties of Thermoplastic Composites
von: Ozgur Demircan, et al.
Veröffentlicht: (2026)

Hydrothermal Aging Behavior and Mechanical Properties Degradation of Flax/Basalt Fiber Hybrid Composites
von: Wenlong Mu, et al.
Veröffentlicht: (2026)

High‐Performance Carbon Fiber Reinforced Polyphenylene Sulfide via Fused Granular Fabrication
von: Zhaozhu Yu, et al.
Veröffentlicht: (2026)

Polylactic Acid ( PLA )/Flax/Phenolic Nonwoven Composite: Synergistic Enhancement of Flame Retardancy and Mechanical Properties
von: Mohsin Raza, et al.
Veröffentlicht: (2026)

Comparative Evaluation of Structure–Processing–Property Relationships in Flax, Hemp, and Cattail Discontinuous fiber Thermoset Composites
von: Md Shadhin, et al.
Veröffentlicht: (2026)

Flax Fiber Flyash/Steel Reinforced Sustainable Composites in Corrosive Conditions: Mechanical, Wear, and Corrosion Properties
von: Sumesh Keerthiveettil Ramakrishnan, et al.
Veröffentlicht: (2026)

Hybridization Effects on the Mechanical and Aging Behavior of Elium Acrylic‐Based Flax‐Glass Fiber Composites
von: Wafa Guesmi, et al.
Veröffentlicht: (2025)

Linking Process‐Induced Degradation to Mechanical Property Deterioration in Flax Fiber–Reinforced Bio‐Polymer Matrix Composites
von: Dimitrios Apostolidis, et al.
Veröffentlicht: (2026)

Fabrication of Carbon Fiber‐Reinforced ABS Composites via Fused Granulated Fabrication With In Situ Blending
von: Di Wang, et al.
Veröffentlicht: (2026)

Development of Biodegradable Composite Yarns With High Mechanical and Thermal Properties via Uniform Distribution of Flax and Polylactic Acid Fibers
von: Shuo Gao, et al.
Veröffentlicht: (2026)

Effect of Annealing on Structure and Mechanical Properties of 3D ‐Printed Polymer Composites
von: Huifang Zhang, et al.
Veröffentlicht: (2025)

3D Printed Continuous Fiber‐Polymer Composites: Fiber Damage and Mechanical Property Reductions Caused by Fused Deposition Modeling
von: Yiwei Hu, et al.
Veröffentlicht: (2025)

Balancing Sustainability and Performance: Bio‐Based Epoxy Systems for Durable Flax Fiber‐Reinforced Composites
von: Vincenzo Fiore, et al.
Veröffentlicht: (2025)

Beetle Exoskeleton‐Inspired High‐Performance Flax Fiber Composites for Next Generation Engineering Applications
von: Abir Saha, et al.
Veröffentlicht: (2026)

Effects of Fiber Length and Printing Speed on the Mechanical Properties of 3D Printed Carbon Fiber—Reinforced Polylactide Composites
von: Weijian Zhang, et al.
Veröffentlicht: (2025)

Evaluation of Hole Geometry and Damage Mechanisms in Abrasive Water Jet Machining of Flax Fiber Reinforced Epoxy Composites
von: Govindan P., et al.
Veröffentlicht: (2026)

Mechanical Characterization of Fused Deposition Modeling‐Printed Wood‐Polylactic Acid Composites Under Water Conditioning
von: Weilong Xu, et al.
Veröffentlicht: (2025)

Effect of PES Sizing on the Properties of 3D ‐Printed Continuous Carbon Fiber/ PEEK Composites
von: Haibin Liu, et al.
Veröffentlicht: (2025)

Effect of Printing Orientation on Microwave Absorption Properties of Additively Manufactured High‐Performance Polymer Composites
von: Sushant D. Sale, et al.
Veröffentlicht: (2026)

Mechanical and Dynamic Analysis of PLA ‐ PBS Biocomposites Reinforced With Flax Fibers: A Comparison Study of Injection Molding and FGF ‐ 3D Printing
von: Nihel Ketata, et al.
Veröffentlicht: (2026)

Microscale Modeling and Damage Mechanisms of Fiber‐Reinforced Composites With Perpendicularly Embedded Optical Fibers
von: Lei Yang, et al.
Veröffentlicht: (2025)

3D Printing Cycle Extension of Low‐Temperature Curing Composites
von: Hong Xiao, et al.
Veröffentlicht: (2025)

On the Mechanical and Thermal Behavior of PLA , PBAT , and PHBV ‐Based Ternary Blends and the Effect of Short Flax Fibers as Reinforcing Agents
von: Alessia Pantaleoni, et al.
Veröffentlicht: (2026)

Tribo‐Evaluation With Multi‐Criteria Decision‐Making Approach of Fly Ash‐Filled Hybrid Flax/Basalt Fiber Reinforced Brake Friction Composites
von: Halil Kılıç
Veröffentlicht: (2025)

Effects of Process Parameters on Anisotropic Mechanical Properties of 3D Printed Short Carbon Fiber‐Reinforced Polyamide Composites
von: Minghui Zhang, et al.
Veröffentlicht: (2026)

Exploring the Tribological Properties of 3D Printed Polymer Composites: An Experimental Study
von: G. Lasch, et al.
Veröffentlicht: (2025)

The Role of Cold Atmospheric Plasma in Surface Modification and Adhesion Behavior of Polypropylene/Flax Biocomposites
von: Asil Ayaz, et al.
Veröffentlicht: (2026)

γ‐ AlOOH ‐Assisted Immobilization of Antioxidants on Glass Fabric to Enhance Mechanical Properties and Durability of Composites in Alkaline Environments
von: Mengfei Du, et al.
Veröffentlicht: (2026)

Tailoring Flexural Properties With Continuous Ramie Fiber‐Reinforced Dual‐Matrix Composites via 3D Printing
von: Xianhui Wu, et al.
Veröffentlicht: (2025)

Effect of Fiber Orientation on the Properties of Continuous Glass Fiber Reinforced PLA Composites Produced via Nozzle‐Impregnation 3D Printing
von: Ahmet Cagri Kilinc, et al.
Veröffentlicht: (2025)

Influence of Printing Parameters and Paths on Warpage in 3D Printing of Continuous Carbon Fiber Composites
von: Jianming Zhou, et al.
Veröffentlicht: (2025)

Effect of High–Low Temperature Treatment on Mechanical Properties and Crack Propagation Behavior of Carbon Fiber‐Reinforced Composites
von: Chengrui Di, et al.
Veröffentlicht: (2025)

Investigation on Dynamic Mechanical Properties of GF / PEEK Thermoplastic Composites Considering High Temperature and Strain Rate Effects
von: Zhaoxin Yun, et al.
Veröffentlicht: (2026)

High‐Velocity Impact Response and Comfort Properties of Discrete‐Droplet‐Coated Cushioning Composite Fabrics
von: Zhuoling Yu, et al.
Veröffentlicht: (2026)

Enhanced Mechanical Properties of 3D Printed Fiber Composites via Simultaneously Printing Short‐Continuous Fibers in a Bi‐Matrix Co‐Extrusion Process
von: Peng Qu, et al.
Veröffentlicht: (2025)

Experimental Study on the Axial Compressive Behavior of Flax and Basalt Fiber Hybrid FRP Confined Concrete Columns With Fiber Layup and Orientation
von: Zhengyi Liu, et al.
Veröffentlicht: (2025)

Study on the Properties of Highly Transparent Thermosetting Glass Fiber Composites Fabricated Using the Transparent Prepreg Process
von: Xia Liang, et al.
Veröffentlicht: (2025)