Buchumschlag

2D / 1D Multidimensional Basalt Flake/Carbon Fiber/Epoxy Resin Interlayer Hybrid Composites With Synergistic Hybrid Effect in Strength, Stiffness and Toughness

Fuente: Wiley Open Access

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Zhaotian Wang, Lu Zhang, Yongbo Hou, Xin Liu, Jilei Guo, Jinguang Yang, Xufeng Dong, Zhi Wang, Shicheng Dong
Format:	Artículo Open Access
Veröffentlicht:	Wiley 2025
Schlagworte:	Polymer Composites
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

Hybrid Reinforcement of PLA With Pumice and Basalt Fiber: A Synergistic Approach
von: Ugur Dincer, et al.
Veröffentlicht: (2025)

Cellulose‐Crosslinked Epoxy Resins/Carbon Nanofiber Hybrid Composites: A Synergistic Study on Strengthening and Toughening Mechanisms
von: Haodong Chen, et al.
Veröffentlicht: (2025)

Enhancing Interfacial Toughness of CFRP /Honeycomb Sandwich Structures via Basalt Fiber and Graphene Oxide Hybrid Modification
von: Huiying Cao, et al.
Veröffentlicht: (2026)

High‐Strength, High‐Stiffness, High‐Toughness, and High‐Energy‐Absorption of 2D Carbon/Silk Plain‐Woven Hybrid Composites With 3D Structure Reinforcement
von: Chaofeng Han, et al.
Veröffentlicht: (2026)

Enhancing liquid‐oxygen compatibility of epoxy resins by direct physical blending of metal organic framework
von: Xin Liu, et al.
Veröffentlicht: (2025)

A Multi‐Scale “Soft–Rigid” Structure Is Constructed on the Surface of Carbon Fibers to Enhance and Strengthen the Strength and Toughness of Epoxy Matrix Composite
von: Ran Jia, et al.
Veröffentlicht: (2026)

Constructing a Molecular Pulley Network Interphase for Simultaneous Enhancement of Interfacial Toughness and Strength in Carbon Fiber/Epoxy Composites
von: Long Ma, et al.
Veröffentlicht: (2025)

Experimental Study on the Axial Compressive Behavior of Flax and Basalt Fiber Hybrid FRP Confined Concrete Columns With Fiber Layup and Orientation
von: Zhengyi Liu, et al.
Veröffentlicht: (2025)

Hydrothermal Aging of Basalt Fiber‐Reinforced Epoxy Composites Modified With Star‐Like Polymer
von: Tatjana Glaskova‐Kuzmina, et al.
Veröffentlicht: (2025)

Hydrothermal Aging Behavior and Mechanical Properties Degradation of Flax/Basalt Fiber Hybrid Composites
von: Wenlong Mu, et al.
Veröffentlicht: (2026)

Flexural Performance Degradation of 3D Orthogonal Jute/Basalt Hybrid Composites Under Hygrothermal Aging
von: Xiaoke Huang, et al.
Veröffentlicht: (2025)

Ordered Alignment of Short Carbon Fibers Enabling High‐Performance Carbon Fiber/Epoxy Resin Composites With Synergistic Thermal Conductive and Mechanical Enhancement
von: Jiamei Luo, et al.
Veröffentlicht: (2025)

Multidimensional Investigation of ILSS and Compressive Strength of CF ‐Reinforced Epoxy Composites
von: Qingchao Li, et al.
Veröffentlicht: (2026)

Bio‐Resveratrol‐Based Epoxy Resin to Improve the Interfacial Bonding Properties of Carbon Fiber/Epoxy Composites
von: Hu Jiang, et al.
Veröffentlicht: (2025)

Surface Grafting of Amino Terminated Dendrimers on Carbon Fibers and Their Influence on Interfacial Properties With Epoxy Resin
von: Mengya Wang, et al.
Veröffentlicht: (2025)

Improved Interlaminar Fracture Toughness of Carbon Fiber/Epoxy/Core‐Shell Rubber Composites by Multiscale Toughening Mechanisms
von: Fukang Li, et al.
Veröffentlicht: (2025)

Fracture Toughness Gain Through Artificial Fiber Bridging in Needle‐Punching Glass Fiber/Epoxy Woven Laminates
von: Galina Forental, et al.
Veröffentlicht: (2026)

Study on Interlaminar Fracture Toughness of Carbon Fiber/Epoxy Composites Toughened With Polyethersulfone/Carbon Nanotubes/Nano‐Alumina Films
von: Yingwei Fu, et al.
Veröffentlicht: (2026)

Tough Photopolymerizable Resin Matrices for Additively Manufactured Continuous Carbon Fiber‐Reinforced Composites
von: Ivan Hevus, et al.
Veröffentlicht: (2026)

Nano‐Engineered Interphase via Sol–Gel Route Enhances Hygrothermal Resistance of Basalt Fiber/Epoxy Composites
von: Chunlei Ren, et al.
Veröffentlicht: (2025)

Synergistic Enhancement of Tribological Performance in Epoxy Coatings With Al 2 O 3 /Polytetrafluoroethylene Hybrid Fillers
von: Luyang Song, et al.
Veröffentlicht: (2026)

Study on Multidirectional Hybrid Effect and Failure Mechanisms of Carbon/Basalt Fiber Bionic Double‐Helicoidal Composite Laminates
von: Shutong Huang, et al.
Veröffentlicht: (2025)

Bursting Behavior and Damage Modeling of Pressure‐Loaded Chopped Basalt/Epoxy Composite Cover
von: Hong Li, et al.
Veröffentlicht: (2026)

Interface Strengthening of Carbon Fiber/Epoxy Resin Composites via Chemical Grafting: Mechanisms and Applications
von: Yu Li, et al.
Veröffentlicht: (2026)

Fused Granular Fabrication of CF / PPS / PES Composites: Achieving Superior Interlayer Bonding and Mechanical Strength
von: Zhaozhu Yu, et al.
Veröffentlicht: (2026)

Dual‐Mechanism Enhanced Basalt Fiber/Polyphenylene Oxide ( BF / PPO ) Composites: Integrating Chemical Bonding and Mechanical Interlocking Through PPO ‐ MAH / CNTs Hybrid Sizing
von: Guangyu Zhu, et al.
Veröffentlicht: (2025)

In Situ Construction of Molybdenum Disulfide/Metal‐Phenolic Network Hybrid Brick‐and‐Mortar Structures for Interfacial Reinforcement of Carbon Fiber/Epoxy Composites
von: Kaining Zhang, et al.
Veröffentlicht: (2025)

Research Progress on Fiber Reinforced Polymer/Metal Hybrid Structures for Automotive Applications
von: Dengfeng Wang, et al.
Veröffentlicht: (2025)

Preparation and Mechanical Properties of Epoxy‐Based Carbon Fiber Composites With Dual‐Component Synergistic Modification
von: Yixiang Zhang, et al.
Veröffentlicht: (2026)

Facile Fabrication of γ‐Graphyne/Graphitic Carbon Nitride Quantum Dots Hybrids for Enhanced Tribological Properties of Epoxy Resin Composites
von: Chunying Min, et al.
Veröffentlicht: (2025)

Effects of Temperature and Hybrid Ratio on Mechanical Properties of Flax/Basalt Weft‐Knitted PLA Composites
von: Yiran Han, et al.
Veröffentlicht: (2026)

Tribo‐Evaluation With Multi‐Criteria Decision‐Making Approach of Fly Ash‐Filled Hybrid Flax/Basalt Fiber Reinforced Brake Friction Composites
von: Halil Kılıç
Veröffentlicht: (2025)

Temperature Field and Thermal Damage Analysis of Glass Fiber/Epoxy Resin Laminated Plates Under Unilateral Heating Conditions
von: Guotao Chen, et al.
Veröffentlicht: (2025)

Research on the Mechanical Properties and Process Parameters of High‐Speed FDM Printed PLA Components Reinforced With Continuous Carbon Fiber/Epoxy Resin Pins
von: Yonghao Lei, et al.
Veröffentlicht: (2025)

Fatigue Analysis of Novel 3D Hybrid Natural Fiber‐Reinforced Composites
von: H. F. M. de Queiroz, et al.
Veröffentlicht: (2025)

Extrusion‐Molded Radially Oriented Basalt Fiber‐Reinforced Rubber Composites for High‐Performance Conveyor Belts
von: Xi Wang, et al.
Veröffentlicht: (2026)

Enhancing Thermal Conductive Properties With Liquid Metal‐Assisted Epoxy Resin Composites
von: Junyan Wang, et al.
Veröffentlicht: (2025)

Tailoring the Flexural Performance of Additively Manufactured Carbon/Glass Fiber Hybrid Composites: Synergistic Optimization of Hybrid Ratio and Ply Stacking Sequence
von: Mingzhu Guan, et al.
Veröffentlicht: (2025)

Fabrication of High‐Performance, High‐Filler‐Content Bamboo Fiber/Epoxy Resin Sustainable Composites via Aqueous‐Phase Processing
von: Xiao Li, et al.
Veröffentlicht: (2025)

Ultraviolet‐Assisted In Situ Shaping and Performance Evaluation of Continuous Carbon Fiber‐Reinforced Thermosetting Resin Matrix Composites in 3D Printing
von: Le Wang, et al.
Veröffentlicht: (2026)