Buchumschlag

Damage Mechanism of Resistance Welded Thermoplastic Composite Joint Based on Acoustic Emission Monitoring and Heat Transfer Modeling

Fuente: Wiley Open Access

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Wenhao Mu, Jipeng Zhang, Yue Wang, Xiangjun Dai, Guodong Fang
Format:	Artículo Open Access
Veröffentlicht:	Wiley 2025
Schlagworte:	Polymer Composites
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

Mechanism of Welding Surface Roughness on Weld Joint Performance in Thermoplastic Composite Structures
von: Qian Wang, et al.
Veröffentlicht: (2025)

Effect of Carbon Fiber Fabric Areal Density on Resistance Welded Joint of Thermoplastic Composites
von: Wenjie Ni, et al.
Veröffentlicht: (2025)

Effect of Process Parameters and Temperature on Delamination Propagation of Resistance‐Welded Thermoplastic Composites
von: Zhaoxin Yun, et al.
Veröffentlicht: (2025)

Effect of boundary conditions on the low‐velocity impact damage mechanism of fiber metal laminate
von: Huadong Wang, et al.
Veröffentlicht: (2024)

Damage Monitoring of Carbon/Glass Hybrid Composites Under Tensile Load Based on Digital Image Correlation and Acoustic Emission Technology
von: Yinyuan Huang, et al.
Veröffentlicht: (2025)

Damage Evolution and Failure Mechanism of Composite Laminates Under Low‐Velocity Impact: Insights From Acoustic Emission and Finite Element Modeling
von: Bin Zuo, et al.
Veröffentlicht: (2026)

Tensile Damage Identification in 3D Braided Composites Based on Multi‐Dimensional Acoustic Emission Features
von: Bohan Zhang, et al.
Veröffentlicht: (2025)

The Analysis of Joint Failure Mode and Effects of Ultrasonic Welding Parameters on the Mechanical Properties of CF / PEEK Composite Joints
von: Jing Wang, et al.
Veröffentlicht: (2026)

Matrix Dependent Cryogenic Damage Mechanisms in CFRPs : Unraveling the Interface Behavior via In Situ Acoustic Emission
von: Rong Bao, et al.
Veröffentlicht: (2026)

Manufacturing and Application of Glass Fiber Composites Based on CNT Films: Resistance Heating Curing, Health Monitoring and Deicing
von: Shuaihao Liu, et al.
Veröffentlicht: (2025)

Assembly of Thermoplastic Composites in the Single Strap Joint Configuration Subjected to Tensile Loading
von: Ferhat Kadioglu
Veröffentlicht: (2026)

Analysis and Optimization for Carbon Fiber Reinforced Thermoplastic Induction Welding With Magnetic Flux Concentrator
von: Mengjuan Li, et al.
Veröffentlicht: (2025)

Hemp Hurd/Medical PPE Composites: Enhancing Mechanical and Thermoplastic Characteristics
von: Arun Ghosh
Veröffentlicht: (2025)

Investigation on Impact Behavior of Thermoplastic Composites: A Ply‐Level Numerical Methodology for Impact‐Resistance Design
von: Shunqi Zhang, et al.
Veröffentlicht: (2025)

Quantitative Evaluation of Ply‐Level Hybridization on Impact Damage Resistance and Damage Characteristics of Laminated Composites
von: Kaidong Zheng, et al.
Veröffentlicht: (2026)

Failure Mechanism and Damage Tolerance Correlation Analysis of Carbon Fiber Reinforced Composites Under Compression After Impact Based on Multi‐Source Monitoring
von: Hui Cai, et al.
Veröffentlicht: (2026)

Self‐Sensing Cord‐Rubber Composites Based on Cord/ CNT for In‐Situ Damage Monitoring
von: Qiandiao Wei, et al.
Veröffentlicht: (2025)

Aramid Fabric and Thermoplastic Polyurethane Composites Reinforced With Carbon Nanotubes for Superior Mechanical Performances
von: Gaurav Singh Chauhan, et al.
Veröffentlicht: (2026)

Influence of Cooling Rate on Residual Strain Evolution and Interlaminar Properties in Thermoplastic Composites With Embedded FBG Monitoring
von: Zijing Qu, et al.
Veröffentlicht: (2025)

Microscale Modeling and Damage Mechanisms of Fiber‐Reinforced Composites With Perpendicularly Embedded Optical Fibers
von: Lei Yang, et al.
Veröffentlicht: (2025)

Deformation Behavior and Mechanical Properties of Continuous Fiber Reinforced Thermoplastic Composite Laminates in Integrated Overmolding
von: Qihui Ying, et al.
Veröffentlicht: (2025)

On the Interfacial Bonding Strength Formation in Overmolded Thermoplastic Composites: An Integrated Experimental and Numerical Investigation
von: Lingyu Yue, et al.
Veröffentlicht: (2025)

Damage Evolution Analysis of Seawater Aged Glass Fiber‐ MWCNT /Epoxy Laminates Through Acoustic Emission and Piezoresistivity
von: Carlos Rubio‐González, et al.
Veröffentlicht: (2025)

Enhanced Adhesion Between a Carbon Fiber Heating Element and a Polyphenylene Sulfide Laminate via Ultrasonic‐Assisted Resistance Welding
von: Wenjie Ni, et al.
Veröffentlicht: (2025)

Analyzing Bending Damage Mechanical Properties of Multi‐Layered Wound Composite Pipes
von: Yangyang Wang, et al.
Veröffentlicht: (2025)

Investigation on Dynamic Mechanical Properties of GF / PEEK Thermoplastic Composites Considering High Temperature and Strain Rate Effects
von: Zhaoxin Yun, et al.
Veröffentlicht: (2026)

Enhanced Tensile Properties and Damage Tolerance of an Unconventional Composite Bolted T‐Joint by Load‐Carrying Laminated Beams
von: Zhitao Luo, et al.
Veröffentlicht: (2025)

Microstructure–Mechanical Response Relationship in Discontinuous Fiber‐Reinforced SMC Composites: Damage Mechanisms
von: Mohammadali Shirinbayan
Veröffentlicht: (2026)

Multiscale Interfacial Engineering Coupled With Controlled Crystallization Dramatically Improves Delamination Resistance of Thermoplastic Fiber Metal Laminates
von: Wenjun Fang, et al.
Veröffentlicht: (2026)

Delamination Study of Open‐Hole Thermoset Composites Under Combined Tension–Bending Fatigue Loading Based on Acoustic Emission
von: Nahal BarzegarBagheri, et al.
Veröffentlicht: (2025)

Interfacial Chemistry Behind Damage Monitoring in Glass Fiber‐Reinforced Composites: Attempts and Perspectives
von: Marta Colombo, et al.
Veröffentlicht: (2025)

Study on the Damage Evolution Mechanism of Fiber‐Reinforced Composite Pipe Under Tensile Load
von: Zaixing Zhang, et al.
Veröffentlicht: (2025)

Design, In Situ Pultrusion Manufacturing and Mechanical Properties of Novel Thermoplastic Acrylate‐Based Fiber‐Reinforced Polymer Bars
von: Lingyu Tian, et al.
Veröffentlicht: (2025)

An Investigation Into the Dynamic Response and Failure Mechanism of CFRTP / Ti6Al4V Hybrid Welded/Bolted Joints Under Low‐Velocity Impact
von: Zhi Li, et al.
Veröffentlicht: (2026)

A Novel Strategy to Enhance the Mechanical Properties of UHMWPE Fiber Composites
von: Yangyang Yu, et al.
Veröffentlicht: (2025)

Research on the Feasibility and Interfacial Investigation of Self‐Resistance Heating Technology in Carbon‐Fiber/PMMA Composites
von: Hongxiao Wang, et al.
Veröffentlicht: (2026)

Impact Resistance of Bionic Hybrid Laminates Based on the Wave‐Lock Structure of Trap‐Jaw Ants
von: Shicai Zhao, et al.
Veröffentlicht: (2025)

Mussel‐Inspired Polydopamine Coating for Damage‐Free Anchoring of Carbon Black to Improve the Interface Performance of Carbon Fiber/Resin Composites
von: Dongliang Wu, et al.
Veröffentlicht: (2025)

Enhancing Interfacial Adhesion Between Copper Mesh Heating Element and Polyamide 66 in Induction Welding of Carbon Fiber/Polyamide 66 Composites via Ozone Treatment
von: Tenghui He, et al.
Veröffentlicht: (2025)

Anisotropic Thermal Expansion Behaviors and Damage Evolution Mechanisms of 3D Angle‐Interlocked Woven Composites Subjected to Thermal Cycling
von: Cao Miao, et al.
Veröffentlicht: (2025)