Buchumschlag

Direct Ink Writing State Prediction Based on Integrated Machine Learning Model Combining Materials Properties and Printing Parameters

Fuente: Wiley Open Access

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Xiaoquan Shi, Sai Liu, Ruixuan Wang, Haitao Liu, Haiying Tian, Yazhou Sun
Format:	Artículo Open Access
Veröffentlicht:	Wiley 2025
Schlagworte:	Polymer Composites
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

High‐Performance Direct Ink Writing of PEDOT : PSS ‐Based Conductive Inks for Flexible Electronics
von: Yazhou Sun, et al.
Veröffentlicht: (2026)

Near‐Infrared Light‐Assisted Direct Ink Writing for Shape‐Following Printing of High‐Strength Composite Components
von: Siqi Wang, et al.
Veröffentlicht: (2025)

Investigation on Curing Kinetics of Recycled Carbon Fiber Reinforced Thermoset Composites Manufactured by Direct Ink Writing
von: Huanbo Cheng, et al.
Veröffentlicht: (2025)

Out‐of‐Plane Compression Behavior and Energy Absorption Characteristics of Carbon Fiber Reinforced Epoxy Composite Honeycomb Cores With Various Cell Geometric Configurations Fabricated via Direct Ink Writing
von: Anirban Mondal, et al.
Veröffentlicht: (2025)

Experimental and Numerical Investigation of Tensile Performance in 3D ‐Printed Continuous Fiber‐Reinforced Composites With Various Printing Paths and Materials Combinations
von: Jiansong Xu, et al.
Veröffentlicht: (2025)

Effect of PES Sizing on the Properties of 3D ‐Printed Continuous Carbon Fiber/ PEEK Composites
von: Haibin Liu, et al.
Veröffentlicht: (2025)

A Two‐Layer Finite‐Element Method to Predict the Water Uptake Behavior of Closed‐Cell Foam in Extreme Moisture Environment
von: Kenan Li, et al.
Veröffentlicht: (2026)

3D Printing and Compressive Properties of Continuous Fibers Negative Poisson's Ratio Rotary Structures
von: Yiming Li, et al.
Veröffentlicht: (2025)

A New Intelligent Prediction Method for Mechanical Properties of Basalt Fiber Composite Materials for the Use of Automotive
von: Tong Wang, et al.
Veröffentlicht: (2025)

Effect of Annealing on Structure and Mechanical Properties of 3D ‐Printed Polymer Composites
von: Huifang Zhang, et al.
Veröffentlicht: (2025)

Research on the Mechanical Properties and Process Parameters of High‐Speed FDM Printed PLA Components Reinforced With Continuous Carbon Fiber/Epoxy Resin Pins
von: Yonghao Lei, et al.
Veröffentlicht: (2025)

Design of Experiments‐Based Optimization of Manufacturing Parameters to Improve the Properties of GFRPP Composite Rebars
von: Ping Zhou, et al.
Veröffentlicht: (2025)

Structural Design and Performance Control Mechanisms of Gradient Structure Composite Materials: A Review
von: Xiaohan Ma, et al.
Veröffentlicht: (2026)

Enhanced Tensile Properties and Damage Tolerance of an Unconventional Composite Bolted T‐Joint by Load‐Carrying Laminated Beams
von: Zhitao Luo, et al.
Veröffentlicht: (2025)

Study on the Vibration Characteristics of Composite Rotor Blades in Humid Environment
von: Ziheng Wang, et al.
Veröffentlicht: (2025)

Effects of Process Parameters on Anisotropic Mechanical Properties of 3D Printed Short Carbon Fiber‐Reinforced Polyamide Composites
von: Minghui Zhang, et al.
Veröffentlicht: (2026)

Interfacial Properties Prediction of Carbon Fiber Composites via Multiscale Nanomaterial Enhancement and Wetting Parameter Analysis
von: Chunhang Shang, et al.
Veröffentlicht: (2025)

Influence of Printing Parameters and Paths on Warpage in 3D Printing of Continuous Carbon Fiber Composites
von: Jianming Zhou, et al.
Veröffentlicht: (2025)

Effective Combination of Carbon Nanotubes and Polyimide to Enhance Interlaminar Properties of Carbon Fiber Reinforced Polyether Ether Ketone Composites
von: Jiupeng Song, et al.
Veröffentlicht: (2025)

Evaluation of Mechanical, Thermal, Rheological, and Biocompatibility Properties of Additively Manufactured Metal‐Reinforced Biocomposites Optimized by Reinforcement Ratios and Printing Parameters
von: İbrahim Baki Sahin, et al.
Veröffentlicht: (2026)

Cyclic Compression Properties of High‐Strength, Recoverable, Light‐Curable 4D Printing Materials Reinforced With Glass Fibers
von: Youlong Wang, et al.
Veröffentlicht: (2025)

Enhanced Mechanical Properties of 3D Printed Fiber Composites via Simultaneously Printing Short‐Continuous Fibers in a Bi‐Matrix Co‐Extrusion Process
von: Peng Qu, et al.
Veröffentlicht: (2025)

Synthesis and Electromagnetic Wave Absorbing Properties of FeCoNi Nanoparticle‐Bacterial Cellulose Based Carbon Materials
von: Yilin Wu, et al.
Veröffentlicht: (2025)

Logistic Mapping Multi‐Layer Extreme Learning Machine‐Based Delamination Prediction Method for Carbon Fiber‐Reinforced Plastic Drilling
von: Wenli Yao, et al.
Veröffentlicht: (2026)

Influence Mechanism of Constituent Materials on the Interlaminar Fracture Properties of Composite Laminates
von: Tianjiao Li, et al.
Veröffentlicht: (2025)

Thermoplastic Polyurethane Composites With Enhanced Thermal Conductivity and Favorable Mechanical Properties via 3D Printing‐Induced Oriented‐Boron Nitride/Alumina Network
von: Zhan Liu, et al.
Veröffentlicht: (2026)

Machine learning to optimize nonlinear conductive performance of composites for self‐adaptive electromagnetic shielding
von: Hongfei Li, et al.
Veröffentlicht: (2024)

3D Woven Preforms and Composites: Current Developments, Material Properties, and Application Potential
von: He Yu, et al.
Veröffentlicht: (2025)

Toward High‐Thermal‐Conductivity Polymer‐Based Materials: Breakthroughs and Barriers
von: Yong Liu, et al.
Veröffentlicht: (2025)

Effects of Fiber Length and Printing Speed on the Mechanical Properties of 3D Printed Carbon Fiber—Reinforced Polylactide Composites
von: Weijian Zhang, et al.
Veröffentlicht: (2025)

Investigation of the Impact Behaviors of Curved Fiber–Reinforced Foam Sandwich Materials
von: Xiaohan Liu, et al.
Veröffentlicht: (2025)

A New Method of Graphene Oxide and Multi‐Walled Carbon Nanotube Grafting for Improving Mechanical Properties and Thermal Stability of Carbon Fiber‐Polylactic Acid Composites
von: Mingrui Liu, et al.
Veröffentlicht: (2025)

Analysis of low‐velocity impact response and damage characteristics of composite laminates with rigid/soft blunt objects
von: Yongjie Zhang, et al.
Veröffentlicht: (2025)

Effect of Diamond Content on Thermal, Mechanical, and Tribological Properties of Resin‐Based Friction Materials
von: Zhe Zhou, et al.
Veröffentlicht: (2025)

Exploring the Tribological Properties of 3D Printed Polymer Composites: An Experimental Study
von: G. Lasch, et al.
Veröffentlicht: (2025)

Deformation Characteristics of Multilayered Self‐Balanced Arched Lattice Truss Structures Under Compression and Bending
von: Wenyi Bao, et al.
Veröffentlicht: (2025)

Enhanced Interfacial Properties of FMLs Through Nanofiller Integration and Surface Modification
von: Mingyu Liu, et al.
Veröffentlicht: (2025)

Predicting the Strength of Additively Manufactured Polymeric Nanocomposites Based on the Filament Properties
von: Roham Rafiee, et al.
Veröffentlicht: (2025)

Deformation Behavior and Mechanical Properties of Continuous Fiber Reinforced Thermoplastic Composite Laminates in Integrated Overmolding
von: Qihui Ying, et al.
Veröffentlicht: (2025)

Experimental investigation on axial compression properties of bamboo winding thin‐walled tubes under different winding angles
von: Haitao Li, et al.
Veröffentlicht: (2025)