:: Library Catalog

Buchumschlag

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Kunyang Li, Zihe Cao, Wenxin Fu, Haixiao Hu, Dongfeng Cao, Hao Li, Yu Zhang, Shuxin Li
Format:	Artículo Open Access
Veröffentlicht:	Wiley 2025
Schlagworte:	Polymer Composites
Online-Zugang:	https://4spepublications.onlinelibrary.wiley.com/doi/10.1002/pc.70529
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

Influence of Temperature Profile on Crack Evolution in Constrained Thermoset Matrix Curing
von: Zihe Cao, et al.
Veröffentlicht: (2025)

Wrinkling Control During Deep Draping of Dry Fiber Fabrics: An Effective Numerical Optimization Approach
von: Hongda Chen, et al.
Veröffentlicht: (2026)

Load‐Bearing Capacity and Failure Mode of L‐Shaped Laminates: The Role of Delamination Defect Location and Fiber Bridging
von: Dongfeng Cao, et al.
Veröffentlicht: (2025)

Mechanical Behaviors and Damage Mechanisms of Hybrid Laminates Under Low Velocity Impact and Compression After Impact Loading
von: Kaidong Zheng, et al.
Veröffentlicht: (2025)

Effect of temperature aging of thermoset UD prepregs on inter‐ply friction behavior and formability in prepreg compression molding process
von: Yu Zhang, et al.
Veröffentlicht: (2024)

Quantitative Evaluation of Ply‐Level Hybridization on Impact Damage Resistance and Damage Characteristics of Laminated Composites
von: Kaidong Zheng, et al.
Veröffentlicht: (2026)

Effect of Support Boundaries on Impact Response and Residual Properties of Thick‐Ply and Hybrid Laminates
von: Kaidong Zheng, et al.
Veröffentlicht: (2025)

Influence of Fiber Surface Treatment on the Elevated Temperature Interfacial Properties of Fiber‐Reinforced Phthalonitrile Composites
von: Bing Han, et al.
Veröffentlicht: (2026)

Investigation on Curing Kinetics of Recycled Carbon Fiber Reinforced Thermoset Composites Manufactured by Direct Ink Writing
von: Huanbo Cheng, et al.
Veröffentlicht: (2025)

A Multi‐Scale “Soft–Rigid” Structure Is Constructed on the Surface of Carbon Fibers to Enhance and Strengthen the Strength and Toughness of Epoxy Matrix Composite
von: Ran Jia, et al.
Veröffentlicht: (2026)

Three‐Dimensional Interfacial Engineering of Carbon Fibers for Enhanced Mechanical Properties and Electromagnetic Shielding of Carbon Fiber Composites
von: Weibo Zhou, et al.
Veröffentlicht: (2025)

Study on the Damage Evolution Mechanism of Fiber‐Reinforced Composite Pipe Under Tensile Load
von: Zaixing Zhang, et al.
Veröffentlicht: (2025)

Spray Deposited Surface Treatment for Enhanced Mechanical Properties of Recycled Carbon Fiber Reinforced Composites
von: Manesha Fernando, et al.
Veröffentlicht: (2025)

The Effect of Pre‐Cyclic Thermal Loads on the Buckling Performance of Glass Fiber‐Reinforced Polymer Composites Without Post‐Curing Treatment: Experimental and Numerical Investigation
von: Sedat Süsler, et al.
Veröffentlicht: (2025)

Influence of Fiber Layer Stacking, Annealing at Different Pressures and Fiber Volume Fraction on Flexural Mechanical Properties of 3D Printed Reinforced Composites
von: Zeeshan Ali, et al.
Veröffentlicht: (2026)

Enhanced Mechanical Properties of 3D Printed Fiber Composites via Simultaneously Printing Short‐Continuous Fibers in a Bi‐Matrix Co‐Extrusion Process
von: Peng Qu, et al.
Veröffentlicht: (2025)

Effects of Fiber Length and Printing Speed on the Mechanical Properties of 3D Printed Carbon Fiber—Reinforced Polylactide Composites
von: Weijian Zhang, et al.
Veröffentlicht: (2025)

Mechanically Robust and Flame‐Retardant High‐Fiber‐Loading Bamboo Fiber/Waterborne Epoxy Composites via a Reactive Ternary Deep Eutectic Solvent
von: Jianquan Zhu, et al.
Veröffentlicht: (2026)

Mechanical Performance of Polymer Mortar Reinforced With Surface‐Modified Agave Fibers
von: Miguel Martínez‐López, et al.
Veröffentlicht: (2025)

The Fracture Behavior of Carbon Fibers and Their Effects on Mechanical, Conductive, and Thermal Performance of Carbon Fibers Reinforced PPS / SEBS Blends
von: Guo Li, et al.
Veröffentlicht: (2025)

Mechanical and Tribological Properties of Glass Fiber/Polyethylene Hybrid Fiber Reinforced NBR Composites: Experiments and Molecular Dynamics Simulation
von: Taian Wang, et al.
Veröffentlicht: (2026)

Modeling and Analyzing of Rolling Contact Behavior Between the Striped Roller and the Tow in Automated Fiber Placement
von: Yan Li, et al.
Veröffentlicht: (2025)

Repeated Double‐Point Low‐Velocity Impact Response and Damage Interference Mechanism of Glass Fiber‐Reinforced Composites
von: Hao Li, et al.
Veröffentlicht: (2025)

Incorporating Fiber Orientation–Length Dependence for Accurate Elastic Modulus Prediction in Short Fiber Reinforced Polymer Composites
von: Tao Guan, et al.
Veröffentlicht: (2026)

3D Printed Continuous Fiber‐Polymer Composites: Fiber Damage and Mechanical Property Reductions Caused by Fused Deposition Modeling
von: Yiwei Hu, et al.
Veröffentlicht: (2025)

ZnO@C/PEDOT ‐Modified Carbon Fibers for Synergistic Enhancement of Mechanical and Electromagnetic Interference Shielding Properties of Carbon Fiber Composites
von: Qi Wang, et al.
Veröffentlicht: (2026)

Enhancing Interfacial Toughness of CFRP /Honeycomb Sandwich Structures via Basalt Fiber and Graphene Oxide Hybrid Modification
von: Huiying Cao, et al.
Veröffentlicht: (2026)

Experimental and Numerical Study of Milling Tool Wear in Carbon Fiber Reinforced Plastics: Mechanisms and Impact on Machining Quality
von: Zhaoxin Hou, et al.
Veröffentlicht: (2025)

Preparation and Mechanical Properties of Epoxy‐Based Carbon Fiber Composites With Dual‐Component Synergistic Modification
von: Yixiang Zhang, et al.
Veröffentlicht: (2026)

Fiber Path Optimization for Strength Enhancement and Damage Control in Open‐Hole Fiber‐Reinforced Laminates
von: Feng Zhang, et al.
Veröffentlicht: (2025)

Correlation Between Bonding Mechanism and Interleaved Mesh– GPTMS Surface Synergy in Co‐Cured Composite Joints
von: Sekar Balaji, et al.
Veröffentlicht: (2026)

Continuous High‐Efficiency Treatment and Process Optimization of Pultruded Plant Fiber Reinforced Composites for Structural Applications
von: Fangcheng Yuan, et al.
Veröffentlicht: (2025)

Microscale Modeling and Damage Mechanisms of Fiber‐Reinforced Composites With Perpendicularly Embedded Optical Fibers
von: Lei Yang, et al.
Veröffentlicht: (2025)

Dual‐Scale Synergistic Surface Modification of Carbon Fiber Fabric for Enhanced Interfacial Bonding and Mechanical Properties of PA6 Composites
von: Hui Fang, et al.
Veröffentlicht: (2026)

Influence of Metal Layers on the Mechanical Properties of Carbon‐Fiber Epoxy Laminates: An Experimental Investigation
von: Mohammed Jamsheed, et al.
Veröffentlicht: (2025)

Interface Strengthening of Carbon Fiber/Epoxy Resin Composites via Chemical Grafting: Mechanisms and Applications
von: Yu Li, et al.
Veröffentlicht: (2026)

Effects of Process Parameters on Anisotropic Mechanical Properties of 3D Printed Short Carbon Fiber‐Reinforced Polyamide Composites
von: Minghui Zhang, et al.
Veröffentlicht: (2026)

Manufacturing and Application of Glass Fiber Composites Based on CNT Films: Resistance Heating Curing, Health Monitoring and Deicing
von: Shuaihao Liu, et al.
Veröffentlicht: (2025)

Modeling Flow‐Deformation Coupling to Predict Fiber Deformation During the Continuous Lamination of Organosheets
von: Lingyu Yue, et al.
Veröffentlicht: (2026)

Bifunction‐Metastructure Streamlined Constructing by Carbon Fiber Bundles Between Layers During Molding Process Transforming Glass Fiber Cloth/Epoxy Into Wave‐Absorbing/Load‐Bearing Integrated Metamaterial
von: Xiaomei Du, et al.
Veröffentlicht: (2025)