Image de couverture de livre

Preparation and Characterization of Fluorescent Wood‐Plastic Composite 3D Printing Substrates

Fuente: Wiley Open Access

Enregistré dans:

Détails bibliographiques
Auteurs principaux:	Weilin Wang, Qunli Zhang
Format:	Artículo Open Access
Publié:	Wiley 2025
Sujets:	Polymer Composites
Accès en ligne:	Acceder al recurso
Tags:	Ajouter un tag Pas de tags, Soyez le premier à ajouter un tag!

Documents similaires

Mechanical Characterization of Fused Deposition Modeling‐Printed Wood‐Polylactic Acid Composites Under Water Conditioning
par: Weilong Xu, et autres
Publié: (2025)

Influence of Printing Parameters and Paths on Warpage in 3D Printing of Continuous Carbon Fiber Composites
par: Jianming Zhou, et autres
Publié: (2025)

Interfacial Bonding Performance Between Wood–Plastic Composite and Glass Fiber‐Reinforced Polymer in a Wetting–Drying Cycling Environment
par: Xinyue Xu, et autres
Publié: (2026)

Effect of Annealing on Structure and Mechanical Properties of 3D ‐Printed Polymer Composites
par: Huifang Zhang, et autres
Publié: (2025)

Study on the Preparation and Properties of 3D ‐Printed PETG / AgNPs Antibacterial Coatings for Clear Aligners
par: Yuexing Huang, et autres
Publié: (2025)

Effects of Fiber Length and Printing Speed on the Mechanical Properties of 3D Printed Carbon Fiber—Reinforced Polylactide Composites
par: Weijian Zhang, et autres
Publié: (2025)

3D Printing Cycle Extension of Low‐Temperature Curing Composites
par: Hong Xiao, et autres
Publié: (2025)

Exploring the Tribological Properties of 3D Printed Polymer Composites: An Experimental Study
par: G. Lasch, et autres
Publié: (2025)

Comprehensive and Comparative Characterizations of Tensile Properties and Fracture Mechanisms of 3D Printed Multifunctional Carbon‐Fiber and Metal‐Filled PLA Composite Parts
par: Dongqing Pan, et autres
Publié: (2025)

Biodegradation and Characterization of 3‐D Printed PLA ‐Based Polymer Composites Reinforced With Cellulose Based Hemp/Kenaf Fibers and Coconut/Walnut Fillers
par: Vijay Chaudhary, et autres
Publié: (2025)

Ultraviolet‐Assisted In Situ Shaping and Performance Evaluation of Continuous Carbon Fiber‐Reinforced Thermosetting Resin Matrix Composites in 3D Printing
par: Le Wang, et autres
Publié: (2026)

Preparation and Characterization of Silica/SolutionStyrene‐Butadiene Rubber Composite UsingAlkenylalkoxysilane
par: Dae Jin Kim, et autres
Publié: (2025)

Effects of Process Parameters on Anisotropic Mechanical Properties of 3D Printed Short Carbon Fiber‐Reinforced Polyamide Composites
par: Minghui Zhang, et autres
Publié: (2026)

Tailoring Flexural Properties With Continuous Ramie Fiber‐Reinforced Dual‐Matrix Composites via 3D Printing
par: Xianhui Wu, et autres
Publié: (2025)

Experimental and Numerical Investigation of Tensile Performance in 3D ‐Printed Continuous Fiber‐Reinforced Composites With Various Printing Paths and Materials Combinations
par: Jiansong Xu, et autres
Publié: (2025)

Effect of PES Sizing on the Properties of 3D ‐Printed Continuous Carbon Fiber/ PEEK Composites
par: Haibin Liu, et autres
Publié: (2025)

Enhanced Mechanical Properties of 3D Printed Fiber Composites via Simultaneously Printing Short‐Continuous Fibers in a Bi‐Matrix Co‐Extrusion Process
par: Peng Qu, et autres
Publié: (2025)

3D Printed Carbon Fiber Composite for Scalable Piezoresistive Electromagnetic Interference Shielding and Thermal Management
par: Biplab K. Deka, et autres
Publié: (2025)

Low‐Velocity Impact Response and Damage Mechanisms of 3D Printed ASA‐Glass Fiber Composites
par: Sachini Wickramasinghe, et autres
Publié: (2026)

Bioinspired Bouligand‐Sandwich Hybrid: Enhanced Mechanical Performance in Wood Fiber‐Reinforced Composites
par: Jianmin He, et autres
Publié: (2025)

3D Printed Continuous Fiber‐Polymer Composites: Fiber Damage and Mechanical Property Reductions Caused by Fused Deposition Modeling
par: Yiwei Hu, et autres
Publié: (2025)

Biodegradable Nanocomposite Filament Based on PLA / PCL / CNCs for FDM 3D Printing: Production, Characterization and Printability
par: Recep Ilhan, et autres
Publié: (2025)

Enhanced Mechanical Properties and Dimensional Stability of Wood‐Based Composites Through In Situ Chemical Crosslinking
par: Yulian Liu, et autres
Publié: (2025)

Surface‐Inner Structure Engineering in Fast‐Growing Wood via Vacuum‐Dipping Impregnation for Fabricating High Performance Wood‐Based Composites
par: Tiantian Yang, et autres
Publié: (2026)

Print Process Optimization and Viscoelastic Characterization of Vat‐Photopolymerized Glass Fiber‐Reinforced Composites via Experimental and Predictive Modeling
par: Annada Prasad Moharana, et autres
Publié: (2026)

Sustainable 3D Printing of PLA / PBAT /Bamboo Fiber Bio‐Composites: Interfacial Compatibility Regulation Through In Situ Bio‐Based Epoxidized Agent Polymerization
par: Xinyu Song, et autres
Publié: (2026)

Preparation of Silica Reinforced Vinyltriethoxysilane Active Grafted Styrene Butadiene Rubber Composites
par: Changjie Yin, et autres
Publié: (2025)

Remarkable Cassava Rhizome Powders as Bio‐Reinforcing Filler in Wood Thermoset Composites
par: Natkrita Prasoetsopha, et autres
Publié: (2025)

Development and Characterization of Carbon Fiber/Phenolic/Epoxy Composites With 3D Thermal Conductive Networks for Thermal Management Applications
par: Yue Wang, et autres
Publié: (2026)

Ionic Liquid as Plasticizer and Liquid Conductive Filler for Polypropylene‐Based Composite Bipolar Plates
par: Keke Ma, et autres
Publié: (2025)

Macromolecular Grafting of Untreated Glass Fiber: Facile Preparation and Application in High‐Performance Polyolefin Composites
par: Jingsong Wang, et autres
Publié: (2025)

Performance of Glass Fiber Composites With Plastic‐Waste Pyrolysis Char as Filler
par: Jerome Anokwu, et autres
Publié: (2026)

Thermoplastic Polyurethane Composites With Enhanced Thermal Conductivity and Favorable Mechanical Properties via 3D Printing‐Induced Oriented‐Boron Nitride/Alumina Network
par: Zhan Liu, et autres
Publié: (2026)

Preparation and Characterization of Carbon Fiber Spread Tow/Carbon Felt Needled Fabrics
par: Rongrui Wang, et autres
Publié: (2026)

Effect of Fiber Orientation on the Properties of Continuous Glass Fiber Reinforced PLA Composites Produced via Nozzle‐Impregnation 3D Printing
par: Ahmet Cagri Kilinc, et autres
Publié: (2025)

3D Printing of Continuous Carbon Fiber Reinforced Composites With Cyanate Ester Interpenetrating Polymer Networks for Enhanced Thermo‐Mechanical Properties
par: Maisha Mesbah, et autres
Publié: (2025)

Fabrication and Interlaminar Shear Strength of 3D ‐Printed CCF ‐ PEEK Rotationally Curved Structures
par: Xudong Ran, et autres
Publié: (2026)

Low‐Velocity Impact Properties and Failure Modes of Knitted Tubular Shape Memory Polymer Composites Inserted With Helical Yarns
par: Ziyan Niu, et autres
Publié: (2025)

Experimental and Numerical Study of Damage Evolution in Knitted‐Fabric‐Reinforced Polymer Composites
par: Zhihui Li, et autres
Publié: (2026)

Green Functionalization of CaCO 3 via Biobased Modifiers: A Sustainable Strategy to Enhance Interfacial and Mechanical Behaviors in Bamboo‐Plastic Composites
par: Zhenxin Zhang, et autres
Publié: (2025)