Buchumschlag

Influence of Metal Layers on the Mechanical Properties of Carbon‐Fiber Epoxy Laminates: An Experimental Investigation

Fuente: Wiley Open Access

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Mohammed Jamsheed, Faizan Mohammad Rashid, R. Velmurugan
Format:	Artículo Open Access
Veröffentlicht:	Wiley 2025
Schlagworte:	Polymer Composites
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

Molybdenum Disulfide‐Functionalized Multiwalled Carbon Nanotubes Based Epoxy Coating on Epoxy/Carbon Fiber Laminates for Improved Erosion Resistance
von: Arun Sam Varghese, et al.
Veröffentlicht: (2026)

The Influence of CNF / SiO 2 / SCF Additives on Interlaminar Toughening of Glass Fiber/Epoxy Laminates
von: Bin Hu, et al.
Veröffentlicht: (2025)

Surface Grafting of Amino Terminated Dendrimers on Carbon Fibers and Their Influence on Interfacial Properties With Epoxy Resin
von: Mengya Wang, et al.
Veröffentlicht: (2025)

Preparation and Mechanical Properties of Epoxy‐Based Carbon Fiber Composites With Dual‐Component Synergistic Modification
von: Yixiang Zhang, et al.
Veröffentlicht: (2026)

Mechanical Performance of Novel Natural/Glass Fiber Blend for Reinforcing Metal Laminates
von: Shuo Wang, et al.
Veröffentlicht: (2026)

Fracture Toughness Gain Through Artificial Fiber Bridging in Needle‐Punching Glass Fiber/Epoxy Woven Laminates
von: Galina Forental, et al.
Veröffentlicht: (2026)

Comparing the In‐Plane Shear Behavior of Glass Fiber‐Reinforced and Carbon Fiber‐Reinforced Polymer Laminates With the Same Epoxy Matrix System in ±45° Tensile Tests
von: Maria Gfrerrer, et al.
Veröffentlicht: (2026)

Influences of Hygrothermal Aging on Low‐Velocity Impact Damage Characteristics of Carbon Fiber Reinforced Composite Laminates: An Experimental and Numerical Study
von: Haiyang Li, et al.
Veröffentlicht: (2025)

Bio‐Resveratrol‐Based Epoxy Resin to Improve the Interfacial Bonding Properties of Carbon Fiber/Epoxy Composites
von: Hu Jiang, et al.
Veröffentlicht: (2025)

Influence Mechanism of Constituent Materials on the Interlaminar Fracture Properties of Composite Laminates
von: Tianjiao Li, et al.
Veröffentlicht: (2025)

Experimental and Numerical Investigation of Impact‐Induced Delamination in E‐Glass/Epoxy Laminated Composites Under Artificial Marine Environment
von: Pankaj Eknath Rawool, et al.
Veröffentlicht: (2026)

Dual Nano‐Reinforcement Approach for Optimizing Tensile Performance in Glass Fiber‐Reinforced Epoxy Laminates
von: Mahmoud M. Awd Allah, et al.
Veröffentlicht: (2026)

Mechanical Performance Assessment and Streamlined Life‐Cycle Analysis of Random‐Waste Coir‐Fiber Metal Laminates
von: Júlio C. dos Santos, et al.
Veröffentlicht: (2025)

Synergistic Enhancement of Mechanical and Interfacial Properties in Carbon Fiber Epoxy Nanocomposites via Dual Functionalization of Fiber and Exfoliated Hexagonal Boron Nitride Nanosheets
von: Jerrin Joy Varughese, et al.
Veröffentlicht: (2026)

Deformation Behavior and Mechanical Properties of Continuous Fiber Reinforced Thermoplastic Composite Laminates in Integrated Overmolding
von: Qihui Ying, et al.
Veröffentlicht: (2025)

Enhancing the Interfacial Interactions and Thermal Oxidative Mechanical Properties of Aramid Fiber‐Reinforced Epoxy Composites Through Hyperbranched Epoxy‐Grafted Multi‐Walled Carbon Nanotubes
von: Hongke Peng, et al.
Veröffentlicht: (2025)

Synergistic Effect of Sandwich Layer of Carbon Nanotube Bucky Paper in Carbon Fiber Reinforced Hybrid Laminated Composite for High‐Performance Mechanical and Electromagnetic Interference Shielding
von: Jeevan Jyoti, et al.
Veröffentlicht: (2026)

Prediction of In‐Plane Shear Mechanical Properties Through Degree of Bonding Characterization as a Function of Automated Fiber Placement Processing Parameters for Carbon Fiber/ PEKK Composite Laminates
von: Abd‐Elrahman Korayem, et al.
Veröffentlicht: (2026)

Inducing in Situ Delamination Monitoring With Enhanced Fracture Toughness in Fiber‐Metal Laminates Using Carbon Nanotubes
von: Vinay Kumar, et al.
Veröffentlicht: (2025)

Study on the Interface Properties of CF / PEEK ‐Ti Fiber Metal Laminates Enhanced by Synergistic Action of Graphene Oxide and Multi‐Walled Carbon Nanotubes
von: Mingrui Liu, et al.
Veröffentlicht: (2026)

Experimental Investigation of Flexural Fatigue Behavior and Damage Mechanisms in Flax‐Epoxy/Date Palm Petiole Bio‐Sandwich Beams
von: Mohammed Arezki Benzidane, et al.
Veröffentlicht: (2026)

Experimental Study on Anchoring Performance of Wedge Anchorage for Prestressed Basalt Fiber‐Reinforced Plastics Laminates
von: Xinquan Chang, et al.
Veröffentlicht: (2025)

Damage Evolution Analysis of Seawater Aged Glass Fiber‐ MWCNT /Epoxy Laminates Through Acoustic Emission and Piezoresistivity
von: Carlos Rubio‐González, et al.
Veröffentlicht: (2025)

Investigation of the Effect of Low‐Concentration Carbon Oxide Nanohorns on the Properties of Epoxy Resins
von: Jing Wu, et al.
Veröffentlicht: (2026)

Modeling and Analysis of Low Velocity Impact Damage in Carbon Fiber Laminates
von: S. Adhityan, et al.
Veröffentlicht: (2026)

Temperature Field and Thermal Damage Analysis of Glass Fiber/Epoxy Resin Laminated Plates Under Unilateral Heating Conditions
von: Guotao Chen, et al.
Veröffentlicht: (2025)

Interface Strengthening of Carbon Fiber/Epoxy Resin Composites via Chemical Grafting: Mechanisms and Applications
von: Yu Li, et al.
Veröffentlicht: (2026)

Study on Multidirectional Hybrid Effect and Failure Mechanisms of Carbon/Basalt Fiber Bionic Double‐Helicoidal Composite Laminates
von: Shutong Huang, et al.
Veröffentlicht: (2025)

Ordered Alignment of Short Carbon Fibers Enabling High‐Performance Carbon Fiber/Epoxy Resin Composites With Synergistic Thermal Conductive and Mechanical Enhancement
von: Jiamei Luo, et al.
Veröffentlicht: (2025)

Study on Mechanical Properties, Corrosion Resistance, and Antibacterial Properties of Glass Fiber/Epoxy Composite Prepared by Wet Winding Process
von: Mingyu Zhang, et al.
Veröffentlicht: (2026)

Electrophoretic Deposition of Nanoparticles on Carbon Fiber: A Comprehensive Review of Enhancement of Properties in Epoxy Polymer Composites
von: Praveenkumar Jatothu, et al.
Veröffentlicht: (2025)

Research on the Mechanical Properties and Process Parameters of High‐Speed FDM Printed PLA Components Reinforced With Continuous Carbon Fiber/Epoxy Resin Pins
von: Yonghao Lei, et al.
Veröffentlicht: (2025)

Investigating the Synergistic Effect of Polyurethane and Carbon Nanotube on the Mechanical Performance of Epoxy‐Based Composite
von: Hongming Zhang, et al.
Veröffentlicht: (2025)

Influence of Fiber Layer Stacking, Annealing at Different Pressures and Fiber Volume Fraction on Flexural Mechanical Properties of 3D Printed Reinforced Composites
von: Zeeshan Ali, et al.
Veröffentlicht: (2026)

Improved Resistance to Mode I/ II Fracture of Carbon/Epoxy Laminates Reinforced by U‐Shaped z‐Pins and Carbon Nanotubes
von: Yimo Wu, et al.
Veröffentlicht: (2025)

Preliminary Experimental Behavior of Bio‐Epoxy Polymer Impregnation on Curaua Fibers Against Glass Fibers
von: Camilla Alves Freire da Costa, et al.
Veröffentlicht: (2025)

Influence of Spindle Speed on Drilling‐Induced Delamination and Hole Quality in 3D ‐Printed ONYX /Glass Fiber Composite Laminates: An Experimental and FEA Approach
von: Pankaj Kumar, et al.
Veröffentlicht: (2025)

Comprehensive and Comparative Characterizations of Tensile Properties and Fracture Mechanisms of 3D Printed Multifunctional Carbon‐Fiber and Metal‐Filled PLA Composite Parts
von: Dongqing Pan, et al.
Veröffentlicht: (2025)

Improved Interlaminar Fracture Toughness of Carbon Fiber/Epoxy/Core‐Shell Rubber Composites by Multiscale Toughening Mechanisms
von: Fukang Li, et al.
Veröffentlicht: (2025)

Inverse Optimization of Failure Parameters of Carbon Fiber Laminates Under Low‐Velocity Impact
von: Shuguang Yao, et al.
Veröffentlicht: (2026)